journal article·2023-06

Deposition Current Density Induced Alterations in Texture and Grain Boundary Constitution of Electrodeposited Zinc Coatings for Enhanced Corrosion Resistance Performance

K. Sai Jyotheender, Chandan Srivastava

Publisher page

Abstract

Zinc coatings were electrodeposited at different current densities, i.e., 30, 40, 50, 60, and 70 mA/cm2. All the coatings exhibited compact and crack-free morphology. The coating electrodeposited at 50 and 30 mA/cm2 current density showed the highest and lowest corrosion resistance, respectively. Corrosion current density (icorr) and polarization resistance (Rp) values for the 50 mA/cm2 deposited coating were 0.995 µA/cm2 and 5268.62 Ω cm2, respectively. icorr and Rp values for 30 mA/cm2 electrodeposited coating were 64.63 µA/cm2 and 627.51 Ω cm2, respectively. Electron backscatter diffraction analysis showed a direct correlation between the coating micro-texture and its corrosion behavior. The high corrosion resistance of coating electrodeposited at 50 mA/cm2 current density was due to the presence of dominant basal plane surface texture and a higher fraction of low-energy grain boundaries. The high corrosion rate of coating deposited at 30 mA/cm2 current density was due to the presence of high energy texture and large angle boundaries, which promoted corrosive media penetration through grains and grain boundaries, resulting in a higher dissolution rate.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Electrodeposition and Electroless Coatings · Corrosion Behavior and Inhibition · ZnO doping and properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. F. Ebrahimi and Z. Ahmed: J. Appl. Electrochem., 2003, vol. 33, pp. 733–39.10.1023/A:1025049802635 ↗
2. J.C. Puippe and N. Ibl: J. Appl. Electrochem., 1980, vol. 10, pp. 775–84.10.1007/BF00611281 ↗
3. N.P. Wasekar, P. Haridoss, S.K. Seshadri, and G. Sundararajan: Surf. Coatings Technol., 2016, vol. 291, pp. 130–40.10.1016/j.surfcoat.2016.02.024 ↗
4. A.M. Rashidi and A. Amadeh: Surf. Coatings Technol., 2008, vol. 202, pp. 3772–776.10.1016/j.surfcoat.2008.01.018 ↗
5. H. Natter and R. Hempelmann: Electrochim. Acta, 2003, vol. 49, pp. 51–61.10.1016/j.electacta.2003.04.004 ↗
6. K. Saber, C.C. Koch, and P.S. Fedkiw: Mater. Sci. Eng. A, 2003, vol. 341, pp. 174–81.10.1016/S0921-5093(02)00198-3 ↗
7. Y. Li, H. Jiang, W. Huang, and H. Tian: Appl. Surf. Sci., 2008, vol. 254, pp. 6865–869.10.1016/j.apsusc.2008.04.087 ↗
8. S. Li, J. Fu, G. Miao, S. Wang, W. Zhao, Z. Wu, Y. Zhang, and X. Yang: Adv. Mater., 2021, vol. 33, pp. 1–9.
9. T. Yamamoto, K. Igawa, H. Tang, C.Y. Chen, T.F.M. Chang, T. Nagoshi, O. Kudo, R. Maeda, and M. Sone: Microelectron. Eng., 2019, vol. 213, pp. 18–23.10.1016/j.mee.2019.04.012 ↗
10. J.M. Costa, M.S. Hori, and A.F. de Almeida-Neto: Chem. Phys., 2019, vol. 527, p. 110502.10.1016/j.chemphys.2019.110502 ↗
11. J. Yu, L. Wang, L. Su, X. Ai, and H. Yang: J. Electrochem. Soc., 2003, vol. 150, p. C19.10.1149/1.1525269 ↗
12. S. Glasstone: Trans. Faraday Soc., 1935, vol. 31, pp. 1232–237.10.1039/tf9353101232 ↗
13. A. Gupta and C. Srivastava: Scr. Mater., 2021, vol. 196, p. 113763.10.1016/j.scriptamat.2021.113763 ↗
14. A. Gupta and C. Srivastava: Surf. Coat. Technol., 2021, vol. 425, p. 127709.10.1016/j.surfcoat.2021.127709 ↗
15. L. Jinlong, L. Tongxiang, and W. Chen: J. Solid State Chem., 2016, vol. 240, pp. 109–14.10.1016/j.jssc.2016.05.025 ↗
16. X. Qiao, H. Li, W. Zhao, and D. Li: Electrochim. Acta, 2013, vol. 89, pp. 771–77.10.1016/j.electacta.2012.11.006 ↗
17. M.I. Hossain, M. Kamruzzaman, and A.B.M. Obaidul-Islam: J. Mater. Sci. Mater. Electron., 2015, vol. 26, pp. 1756–762.10.1007/s10854-014-2604-9 ↗
18. A. Goux, T. Pauporté, J. Chivot, and D. Lincot: Electrochim. Acta, 2005, vol. 50, pp. 2239–248.10.1016/j.electacta.2004.10.007 ↗
19. C. Srivastava, S.K. Ghosh, S. Rajak, A.K. Sahu, R. Tewari, V. Kain, and G.K. Dey: Surf. Coat. Technol., 2017, vol. 313, pp. 8–16.10.1016/j.surfcoat.2017.01.043 ↗
20. S.M.S.I. Dulal and E.A. Charles: J. Alloys Compd., 2008, vol. 455, pp. 274–79.10.1016/j.jallcom.2007.01.020 ↗
21. S.M.S.I. Dulal, H.J. Yun, C.B. Shin, and C.K. Kim: Electrochim. Acta, 2007, vol. 53, pp. 934–43.10.1016/j.electacta.2007.08.006 ↗
22. J. Amblard, I. Epelboin, M. Froment, and G. Maurin: J. Appl. Electrochem., 1979, vol. 9, pp. 233–42.10.1007/BF00616093 ↗
23. A.F. de Almeida, H. da Costa Neto, R.A.C. de Santana, J.J.N. Alves, A.R. Nascimento Campos, and S. Prasad: Can. J. Chem. Eng., 2021, vol. 99, pp. S284-294.
24. D.P. Weston, S.J. Harris, P.H. Shipway, N.J. Weston, and G.N. Yap: Electrochim. Acta, 2010, vol. 55, pp. 5695–708.10.1016/j.electacta.2010.05.005 ↗
25. M.K. Punith Kumar, M.Y. Rekha, and C. Srivastava: Corros. Rev., 2021, vol. 39, pp. 15–26.10.1515/corrrev-2020-0035 ↗
26. C. Hu, X. Xie, H. Zheng, Y. Qing, and K. Ren: New J. Chem., 2020, vol. 44, pp. 8890–901.10.1039/D0NJ00561D ↗
27. R. Jain and R. Pitchumani: Surf. Coat. Technol., 2018, vol. 337, pp. 223–31.10.1016/j.surfcoat.2018.01.014 ↗
28. P.A. Sørensen, S. Kiil, K. Dam-Johansen, and C.E. Weinell: J. Coat. Technol. Res., 2009, vol. 6, pp. 135–76.10.1007/s11998-008-9144-2 ↗
29. M.H. Gharahcheshmeh and M.H. Sohi: Mater. Chem. Phys., 2009, vol. 117, pp. 414–21.10.1016/j.matchemphys.2009.06.009 ↗
30. S. Yogesha, K. Udaya Bhat, and A. Chitharanjan Hegde: Synth. React. Inorg. Met. Nano-Met. Chem., 2011, vol. 41, pp. 405–11.10.1080/15533174.2011.556409 ↗
31. Z. Feng, Q. Li, J. Zhang, P. Yang, H. Song, and M. An: Surf. Coat. Technol., 2015, vol. 270, pp. 47–56.10.1016/j.surfcoat.2015.03.020 ↗
32. H. Park and J.A. Szpunar: Corros. Sci., 1998, vol. 40, pp. 525–45.10.1016/S0010-938X(97)00148-0 ↗
33. H. Kancharla, G.K. Mandal, H.S. Maharana, S.S. Singh, and K. Mondal: J. Mater. Eng. Perform., 2022
34. M. Stern and A.L. Geary: J. Electrochem. Soc., 1957, vol. 104, p. 56.10.1149/1.2428496 ↗
35. M. Isakhani-Zakaria, S.R. Allahkaram, and H.A. Ramezani-Varzaneh: Corros. Sci., 2019, vol. 157, pp. 472–80.10.1016/j.corsci.2019.06.023 ↗
36. D.G. Brandon: Acta Metall., 1966, vol. 14, pp. 1479–484.10.1016/0001-6160(66)90168-4 ↗
37. J. Wang and I.J. Beyerlein: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 1–22.
38. J. Wang and I.J. Beyerlein: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3556–569.10.1007/s11661-012-1177-6 ↗
39. K. Sai Jyotheender, M.K. Punith Kumar, and C. Srivastava: Surf. Coat. Technol., 2021, vol. 423, p. 127594.10.1016/j.surfcoat.2021.127594 ↗