journal article·2023-04

The Defining Role of Local Shear on the Development of As-Rolled Microstructure and Crystallographic Texture in Steel

Saurabh Kumar, Sanjay Manda, Ujjal Tewary, Sivasambu Mahesh, R. Balamuralikrishnan, Rahul Kumar Verma, Manjini Sambandam, Shyamprasad Karagadde, Indradev Samajdar

Publisher page

Abstract

This study involved laboratory unidirectional (UDR) and reverse (RR) cold rolling of steel, and corresponding direct (and indirect) observations of surface (and sub-surface) microstructures. Though both processes had identical strain mode of plane strain compression (PSC), the as-rolled surface grains showed clear differences in imposed mesoscopic shear strains. Further, the surface microstructure and its orientation sensitivity differed remarkably between the two processes. RR had more dislocation density, grain misorientations and non-crystallographic microbands, but exhibited insignificant differences between different crystallographic orientations. These effects appeared significant in low carbon interstitial free (IF) steel, but noticeably less so for high strength low alloy (HSLA) grade. The crystallographic textures of both the processes were identical in the mid-thickness section. However, the surface textures differed noticeably irrespective of the steel grade. These were captured quantitatively with a crystal plasticity model, and by introducing parametrically positive (UDR) and negative (RR) local shear strains for the respective surfaces. In summary, this study established, quantitatively, the defining role of local shear strain on the developments of as-rolled microstructure and crystallographic texture of steel.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. W.L. Roberts: Cold Rolling of Steel, 1st ed. Marcel Dekker, Inc., New York, 1978.
2. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-mechanical Processing of Metallic Materials, vol. 10, 10th ed., Elsevier, Amsterdam, 2007.
3. T. Matsuoka and K. Yamamori: Metall. Trans. A, 1975, vol. 6A, pp. 1613–22.10.1007/BF02641975 ↗
4. J. Pittner and M.A. Simaan: Tandem Cold Metal Rolling Mill Control, 1st ed. Springer, London, 2011.10.1007/978-0-85729-067-0 ↗
5. I.Y. Tarnovskii, A.A. Pozdeyev, and V.B. Lyashkov: Deformation of Metals During Rolling, 1st ed. Pergamon Press Ltd., Oxford, 1965.
6. K. Komori and K. Koumura: J. Mater. Process. Technol., 2000, vol. 105, pp. 24–31.10.1016/S0924-0136(00)00537-9 ↗
7. W. Soszyński and A. Studnicka: J. Achiev. Mater. Manuf. Eng., 2012, vol. 55, pp. 810–16.
8. M. Glowacki: J. Mater. Process. Technol., 2005, vol. 168, pp. 336–43.10.1016/j.jmatprotec.2004.12.007 ↗
9. A.V. Korznikov, Y.V. Ivanisenko, D.V. Laptionok, I.M. Safarov, V.P. Pilyugin, and R.Z. Valiev: Nanostruct. Mater., 1994, vol. 4, pp. 159–67.10.1016/0965-9773(94)90075-2 ↗
10. B. Verlinden: Metall. Mater. Eng., 2018, vol. 11, pp. 165–82.
11. Y.T. Zhu and T.G. Langdon: JOM, 2004, vol. 56, pp. 58–63.10.1007/s11837-004-0294-0 ↗
12. W. Truszkowski, J. Kr’ol, and B. Major: Metall. Trans. A, 1980, vol. 11, pp. 749–58.10.1007/BF02661204 ↗
13. W. Truszkowski, J. Krol, and B. Major: Metall. Trans. A, 1982, vol. 13A, pp. 665–69.10.1007/BF02644432 ↗
14. C.S. Lee and B.J. Duggan: Metall. Trans. A, 1991, vol. 22, pp. 2637–43.10.1007/BF02851357 ↗
15. S.H. Lee and D.N. Lee: Int. J. Mech. Sci., 2001, vol. 43, pp. 1997–2015.10.1016/S0020-7403(01)00025-X ↗
16. O. Engler, M.-Y. Huh, and C.N. Tomé: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2299–2315.10.1007/s11661-000-0146-7 ↗
17. O.V. Mishin, B. Bay, and D. Juul Jensen: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1653–62.10.1007/s11661-000-0175-2 ↗
18. N. Kamikawa, T. Sakai, and N. Tsuji: Acta Mater., 2007, vol. 55, pp. 5873–88.10.1016/j.actamat.2007.07.002 ↗
19. D.A. Hughes and N. Hansen: Mater. Sci. Technol., 2012, vol. 7, pp. 544–53.10.1179/mst.1991.7.6.544 ↗
20. E.F. Rauch and J.H. Schmitt: Mater. Sci. Eng. A, 1989, vol. 113, pp. 441–48.10.1016/0921-5093(89)90331-6 ↗
21. S. Thuillier and E.F. Rauch: Acta Metall. Mater., 1994, vol. 42, pp. 1973–83.10.1016/0956-7151(94)90022-1 ↗
22. M.Y. Huht, O. Engler, and D. Raabe: Textures Microstruct., 1995, vol. 24, pp. 225–37.10.1155/TSM.24.225 ↗
23. B. Peeters, B. Bacroix, C. Teodosiu, P. Van Houtte, and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1621–32.10.1016/S1359-6454(01)00067-2 ↗
24. E.V. Nesterova, B. Bacroix, and C. Teodosiu: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2527–38.10.1007/s11661-001-0042-9 ↗
25. E.V. Nesterova, B. Bacroix, and C. Teodosiu: Mater. Sci. Eng., 2001, vol. 309, pp. 495–99.10.1016/S0921-5093(00)01639-7 ↗
26. E.F. Rauch, J.J. Gracio, F. Barlat, A.B. Lopes, and J. Ferreira Duarte: Scripta Mater., 2002, vol. 46, pp. 881–86.10.1016/S1359-6462(02)00073-8 ↗
27. H. Fan, S. Liu, L. Li, C. Deng, and Q. Liu: Mater. Des., 2016, vol. 97, pp. 464–72.10.1016/j.matdes.2016.02.084 ↗
28. J. Zhu, S. Liu, D. Long, Y. Liu, N. Lin, X. Yuan, and D. Orlov: J. Mater. Res. Technol., 2020, vol. 9, pp. 4566–77.10.1016/j.jmrt.2020.02.085 ↗
29. N.P. Gurao, S. Sethuraman, and S. Suwas: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 1497–1507.10.1007/s11661-012-1484-y ↗
30. A. Ghosh, A. Singh, and N.P. Gurao: Mater. Charact., 2017, vol. 125, pp. 83–93.10.1016/j.matchar.2017.01.022 ↗
31. S. Wronski and B. Bacroix: Mater. Charact., 2016, vol. 118, pp. 235–43.10.1016/j.matchar.2016.05.028 ↗
32. N.P. Gurao, A. Ali, and S. Suwas: Mater. Sci. Eng. A, 2009, vol. 504, pp. 24–35.10.1016/j.msea.2008.11.053 ↗
33. H. Wang, C. Lu, and K. Tieu: Crystals, 2019, vol. 9, pp. 1–10.
34. R.K. Sabat, P.K. Samal, and M.S. Ahamed: Mater. Sci. Eng. A, 2018, vol. 715, pp. 348–58.10.1016/j.msea.2018.01.018 ↗
35. Z. Zhang, D. Chen, H. Zhao, and S. Liu: Int. J. Refract. Met. Hard Mater., 2013, vol. 41, pp. 453–60.10.1016/j.ijrmhm.2013.06.003 ↗
36. S.K. Sahoo, R.K. Sabat, B.D. Bishoyi, A.G.S. Anjani, and S. Suwas: Mater. Lett., 2016, vol. 180, pp. 166–69.10.1016/j.matlet.2016.05.162 ↗
37. A. Prakash, T.N. Tak, A. Anand, N.N. Pai, S.V.S. Narayana Murty, C.V. Singh, P.J. Guruprasad, and I. Samajdar: Metall. Mater. Trans. A, 2022, vol. 53, pp. 1–19.10.1007/s11661-022-06698-y ↗
38. S.K. Sahoo, V.D. Hiwarkar, P. Pant, I. Samajdar, K.V. ManiKrishna, G.K. Dey, D. Srivastav, R. Tewari, and S. Banerjee: Mater. Sci. Forum, 2012, vol. 702–703, pp. 838–41.
39. M. Matsuo, T. Sakai, and Y. Suga: Metall. Trans. A, 1986, vol. 17, pp. 1313–22.10.1007/BF02650112 ↗
40. S.E. Schoenfeld and R.J. Asaro: Int. J. Mech. Sci., 1996, vol. 38, pp. 661–83.10.1016/S0020-7403(96)80008-7 ↗
41. S.S. Dhinwal and L.S. Toth: Mater. Charact., 2020, vol. 169, p. 17.10.1016/j.matchar.2020.110578 ↗
42. B. Hutchinson: Philos. Trans. R. Soc. A, 1999, vol. 357, pp. 1471–85.10.1098/rsta.1999.0385 ↗
43. P. Van Houtte, L. Delannay, and I. Samajdar: Textures Microstruct., 1999, vol. 31, pp. 109–49.10.1155/TSM.31.109 ↗
44. J. Sidor, A. Miroux, R. Petrov, and L. Kestens: Acta Mater., 2008, vol. 56, pp. 2495–2507.10.1016/j.actamat.2008.01.042 ↗
45. M.Y. Huh, H.C. Kim, J.J. Park, and O. Engler: Met. Mater. Int., 1999, vol. 5, pp. 437–43.10.1007/BF03026156 ↗
46. Y.B. Xu, Y.L. Bai, Q. Xue, and L.T. Shen: Acta Mater., 1996, vol. 44, pp. 1917–26.10.1016/1359-6454(95)00306-1 ↗
47. R. Roumina and C.W. Sinclair: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2495–2503.10.1007/s11661-008-9582-6 ↗
48. P. Blandford, J.A. Szpunar, D. Daniel, and J.J. Jonas: Textures Microstruct., 1991, vol. 14–18, pp. 525–30.10.1155/TSM.14-18.525 ↗
49. T. Clausmeyer, G. Gerstein, S. Bargmann, B. Svendsen, A.H. Van Den Boogaard, and B. Zillmann: J. Mater. Sci., 2013, vol. 48, pp. 674–89.10.1007/s10853-012-6780-9 ↗
50. D.V. Wilson and P.S. Bate: Acta Metall. Mater., 1994, vol. 42, pp. 1099–1111.10.1016/0956-7151(94)90127-9 ↗
51. J.Y. Kang, B. Bacroix, H. Réglé, K.H. Oh, and H.C. Lee: Acta Mater., 2007, vol. 55, pp. 4935–46.10.1016/j.actamat.2007.05.014 ↗
52. N. Hansen: Scripta Metall. Mater., 1992, vol. 27, pp. 1447–52.10.1016/0956-716X(92)90125-X ↗
53. K. Shen and B.J. Duggan: Acta Mater., 2007, vol. 55, pp. 1137–44.10.1016/j.actamat.2006.06.056 ↗
54. Q.Z. Chen, M.Z. Quadir, and B.J. Duggan: Philos. Mag., 2006, vol. 86, pp. 3633–46.10.1080/14786430600728638 ↗
55. S. Mahesh: Int. J. Plast., 2010, vol. 26, pp. 42–64.10.1016/j.ijplas.2009.05.002 ↗
56. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
57. P. Van Houtte: Manuals MTM-FHM, Department of Metallurgy and Materials Engineering, KU Leuven, Belgium, 1995.
58. H.-J. Bunge: Texture Analysis in Materials Science, Butterworth & Co., London, 1982.
59. U. Welzel, J. Ligot, P. Lamparter, A.C. Vermeulen, and E.J. Mittemeijer: J. Appl. Crystallogr., 2005, vol. 38, p. 1.10.1107/S0021889804029516 ↗
60. P.S. Prevey: X-Ray Diffraction Residual Stress Techniques, ASM International, Almere, 1986.10.31399/asm.hb.v10.a0001761 ↗
61. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
62. K.V. Mani Krishna, R. Raghavan, D. Srivastava, G.K. Dey, S.K. Sahoo, and I. Samjadar: Trans. Indian Inst. Met., 2011, vol. 64, pp. 309–13.10.1007/s12666-011-0063-z ↗
63. S. Raveendra, A.K. Kanjarla, H. Paranjape, S.K. Mishra, S. Mishra, L. Delannay, I. Samajdar, and P. Van Houtte: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 2113–24.10.1007/s11661-010-0580-0 ↗
64. N. Keskar, S. Mukherjee, K.V. Mani Krishna, D. Srivastava, G.K. Dey, P. Pant, R.D. Doherty, and I. Samajdar: Acta Mater., 2014, vol. 69, pp. 265–74.10.1016/j.actamat.2014.01.023 ↗
65. J. Singh, S. Mahesh, G. Kumar, P. Pant, D. Srivastava, G.K. Dey, N. Saibaba, and I. Samajdar: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5058–71.10.1007/s11661-015-3085-z ↗
66. T.J. Ruggles and D.T. Fullwood: Ultramicroscopy, 2013, vol. 133, pp. 8–15.10.1016/j.ultramic.2013.04.011 ↗
67. I. Samajdar and P. Van Houtte: Acta Mater., 1998, vol. 46, pp. 2751–63.10.1016/S1359-6454(97)00466-7 ↗
68. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater., 1998, vol. 47, pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
69. W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29, pp. 25–42.10.1179/imtr.1984.29.1.25 ↗
70. P.S. Bate and J. Quinta da Fonseca: Mater. Sci. Eng. A, 2004, vol. 380, pp. 365–77.10.1016/j.msea.2004.04.007 ↗
71. S. Li, I.J. Beyerlein, and M.A.M. Bourke: Mater. Sci. Eng. A, 2005, vol. 394, pp. 66–77.10.1016/j.msea.2004.11.032 ↗
72. R. Khatirkar, K.V. Mani Krishna, L.A.I. Kestens, R. Petrov, P. Pant, and I. Samajdar: ISIJ Int., 2011, vol. 51, pp. 849–56.10.2355/isijinternational.51.849 ↗
73. R. Khatirkar, B. Vadavadagi, S.K. Shekhawat, A. Haldar, and I. Samajdar: ISIJ Int., 2012, vol. 52, pp. 884–93.10.2355/isijinternational.52.884 ↗
74. I. Samajdar, B. Verlinden, P. Van Houtte, and D. Vanderschueren: Mater. Sci. Eng., 1997, vol. 238, pp. 343–50.10.1016/S0921-5093(97)00455-3 ↗
75. R. Khatirkar, B. Vadavadagi, A. Haldar, and I. Samajdar: ISIJ Int., 2012, vol. 52, pp. 894–901.10.2355/isijinternational.52.894 ↗
76. L.S. Toth, J.J. Jonas, D. Daniel, and R.K. Ray: Metall. Trans. A, 1990, vol. 21A, pp. 2985–3000.10.1007/BF02647219 ↗
77. R.K. Ray, J.J. Jonas, and R.E. Hook: Int. Mater. Rev., 1994, vol. 39, pp. 129–72.10.1179/imr.1994.39.4.129 ↗
78. M. Hoelscher, D. Raabe, and K. Luecke: Steel Res., 1991, vol. 62, pp. 567–75.10.1002/srin.199100451 ↗
79. K.H.H. Ahmed and A. Ihsan: Adv. Phys. Theor. Appl., 2015, vol. 49, pp. 46–56.
80. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, S.M. Keralavarma, A.A. Benzerga, C. Hutchinson, and I. Samajdar: Metall. Mater. Eng., 2019, vol. 50, pp. 5038–55.
81. B.L. Li, A. Godfrey, Q.C. Meng, Q. Liu, and N. Hansen: Acta Mater., 2004, vol. 52, pp. 1069–81.10.1016/j.actamat.2003.10.040 ↗
82. X. Huang and G. Winther: Philos. Mag., 2007, vol. 87, pp. 5189–5214.10.1080/14786430701652851 ↗
83. Q.Z. Chen and B.J. Duggan: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3423–30.10.1007/s11661-004-0178-5 ↗
84. S. Suwas, R.K. Ray, Crystallographic Texture of Materials (Springer, Manchester, 2014)10.1007/978-1-4471-6314-5 ↗
85. P. Van Houtte, L. Delannay, and S.R. Kalidindi: Int. J. Plast., 2002, vol. 18, pp. 359–77.10.1016/S0749-6419(00)00102-9 ↗
86. H. Wang, C. Lu, and R. Wang: Int. J. Adv. Manuf. Technol., 2020, vol. 111, pp. 37–51.10.1007/s00170-020-06025-y ↗
87. D.C. Camilo Magalhães, O.M. Cintho, J.B. Rubert, V.L. Sordi, and A.M. Kliauga: Mater. Sci. Eng. A, 2020, vol. 796, p. 140055.10.1016/j.msea.2020.140055 ↗
88. S. Mahesh: Int. J. Plast., 2009, vol. 25, pp. 752–67.10.1016/j.ijplas.2008.06.011 ↗
89. G.I. Taylor: J. Inst. Met., 1938, vol. 62, pp. 307–24.
90. A. Molinari, G.R. Canova, and S. Ahzi: Acta Metall., 1987, vol. 35, pp. 2983–94.10.1016/0001-6160(87)90297-5 ↗
91. U.F. Kocks’ and H. Chandra: Acta Mater., 1982, vol. 30, pp. 695–709.10.1016/0001-6160(82)90119-5 ↗
92. P. Van Houtte, S. Li, M. Seefeldt, and L. Delannay: Int. J. Plast., 2005, vol. 21, pp. 589–624.10.1016/j.ijplas.2004.04.011 ↗
93. Y. Wu, Y. Shen, K. Chen, Y. Yu, G. He, and P. Wu: J. Alloys Compd., 2017, vol. 711, pp. 495–505.10.1016/j.jallcom.2017.03.333 ↗
94. Z.J. Li, G. Winther, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 401–10.10.1016/j.actamat.2005.09.011 ↗
95. N.A. Sakharova and J.V. Fernandes: Mater. Chem. Phys., 2006, vol. 98, pp. 44–50.10.1016/j.matchemphys.2006.01.038 ↗
96. S. Cicalè, I. Samajdar, B. Verlinden, G. Abbruzzese, and P. Van Houtte: ISIJ Int., 2002, vol. 42, pp. 770–78.10.2355/isijinternational.42.770 ↗
97. S. Zaefferer, J.C. Kuo, Z. Zhao, M. Winning, and D. Raabe: Acta Mater., 2003, vol. 51, pp. 4719–35.10.1016/S1359-6454(03)00259-3 ↗
98. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5317–31.10.1007/s11661-017-4280-x ↗
99. A. Lodh, U. Tewary, R.P. Singh, T.N. Tak, A. Prakash, A. Alankar, P.J. Guruprasad, and I. Samajdar: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5946–52.10.1007/s11661-018-4964-x ↗
100. A.A. Saleh, C. Haase, E.V. Pereloma, D.A. Molodov, and A.A. Gazder: Acta Mater., 2014, vol. 70, pp. 259–71.10.1016/j.actamat.2014.02.033 ↗