Deformation-Induced Planar Defects in Immm Ni2(Cr, Mo, W) Strengthened HAYNES® 244® Superalloy
Source abstract
Abstract
Precipitate shearing mechanisms during quasi-static elevated temperature tensile deformation and high temperature creep of Immm Ni2(Cr, Mo, W) strengthened HAYNES® 244® alloy have been investigated. Interrupted tensile tests from room temperature to 760 °C (1400 °F) and creep tests at 138 to 693 MPa (20 to 100 ksi) and 649 °C to 760 °C (1200 °F to 1400 °F) were conducted to experimentally determine the active deformation mechanisms under relevant operating conditions. Stacking faults were observed to form in precipitates at the start of deformation by transmission electron microscopy diffraction contrast analysis. During subsequent deformation in these conditions, these stacking faults thickened into deformation microtwins at higher strains to accommodate plastic strain, which is contrary to many other Ni-based alloy systems where superlattice intrinsic and extrinsic stacking faults or coupled antiphase boundary shearing take place. This microtwinning deformation offers unique advantages to ductility and prevents debits in yield strength due to over aging. Microtwinning was observed across all strain rates, stresses, and temperatures investigated. The relative fault energies for the formation of these planar defects are discussed and compared to Density Functional Theory calculations.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Microstructure and Mechanical Properties of Steels · Intermetallics and Advanced Alloy Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. T.M. Pollock and S. Tin: J. Propuls. Power., 2006, vol. 22, pp. 361–74. https://doi.org/10.2514/1.18239.10.2514/1.18239 ↗
2. E. Benini: Advances in Gas Turbine Technology, BoD - Books on Demand, Norderstedt, 2011.10.5772/664 ↗
3. R.C. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, Cambridge, 2006. https://doi.org/10.1017/CBO9780511541285.10.1017/CBO9780511541285 ↗
4. R.E. Schafrik and R. Sprague: Adv. Mater. Process., 2004, vol. 162, pp. 33–36.
5. R.C. Reed, T. Tao, and N. Warnken: Acta Mater., 2009, vol. 57, pp. 5898–5913. https://doi.org/10.1016/j.actamat.2009.08.018.10.1016/j.actamat.2009.08.018 ↗
6. J. Xie, S. Tian, X. Zhou, X. Yu, and W. Wang: Mater. Sci. Eng. A, 2012, vol. 538, pp. 306–14. https://doi.org/10.1016/j.msea.2012.01.049.10.1016/j.msea.2012.01.049 ↗
7. T.M. Smith, R.R. Unocic, H. Deutchman, and M.J. Mills: Mater. High Temp., 2016, vol. 33, pp. 372–83. https://doi.org/10.1080/09603409.2016.1180858.10.1080/09603409.2016.1180858 ↗
8. D.P. Pope: Int. Met. Rev., 1984, https://doi.org/10.1179/imtr.1984.29.1.136.10.1179/imtr.1984.29.1.136 ↗
9. L. Feng, D. Mcallister, C.H. Zenk, M.J. Mills, and Y. Wang, in Superalloys 2020, Springer, Cham, 2020, pp. 1055–65.https://doi.org/10.1007/978-3-030-51834-910.1007/978-3-030-51834-9 ↗
10. O.I. Gorbatov, I.L. Lomaev, Y.N. Gornostyrev, A. Ruban, D. Furrer, V. Venkatesh, D.L. Novikov, and S.F. Burlatsky: Phys. Rev. B., 2016, vol. 93, pp. 1–8. https://doi.org/10.1103/PhysRevB.93.224106.10.1103/PhysRevB.93.224106 ↗
11. M. Dodaran, A.H. Ettefagh, S.M. Guo, M.M. Khonsari, W.J. Meng, N. Shamsaei, and S. Shao: Intermetallics (Barking), 2020, vol. 117, p. 106670. https://doi.org/10.1016/j.intermet.2019.106670.10.1016/j.intermet.2019.106670 ↗
12. N. Yang, Y. Wei, C. Song, and L. Jiao: Jinshu Xuebao/Acta Metall. Sin., 1986, vol. 22, pp. 477–83.
13. M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530–39. https://doi.org/10.1016/j.actamat.2014.08.033.10.1016/j.actamat.2014.08.033 ↗
14. J.P. Hirth, J. Lothe, and T. Mura: J. Appl. Mech., 1983, vol. 50, pp. 476–77. https://doi.org/10.1115/1.3167075.10.1115/1.3167075 ↗
15. B.H. Kear and H.G.F. Wilsdorf: Trans. Am. Inst. Min. Metall. Pet. Eng., 1962, vol. 224, pp. 382–86.
16. L.E. Shilkrot, R.E. Miller, and W.A. Curtin: J. Mech. Phys. Solids., 2004, https://doi.org/10.1016/j.jmps.2003.09.023.10.1016/j.jmps.2003.09.023 ↗
17. G. Schoeck: Philos. Mag. A, 1999, vol. 79, pp. 1207–15. https://doi.org/10.1080/01418619908210356.10.1080/01418619908210356 ↗
18. J. Wang and H. Sehitoglu: Intermetallics (Barking), 2014, vol. 52, pp. 20–31. https://doi.org/10.1016/j.intermet.2014.03.009.10.1016/j.intermet.2014.03.009 ↗
19. G. Molenat and D. Caillard: Philos. Mag. A, 1991, vol. 64, pp. 1291–1317. https://doi.org/10.1080/01418619108225350.10.1080/01418619108225350 ↗
20. V. Vitek: Intermetallics (Barking), 1998, vol. 6, pp. 579–85. https://doi.org/10.1016/s0966-9795(98)00040-5.10.1016/s0966-9795(98)00040-5 ↗
21. M. Khantha, V. Vitek, and D.P. Pope: Model. Simul. Mater. Sci Eng., 1994, vol. 2, pp. 587–96. https://doi.org/10.1088/0965-0393/2/3A/012.10.1088/0965-0393/2/3A/012 ↗
22. V.A. Vorontsov, C.M.F. Rae, C. Shen, Y. Wang, and D. Dye: Acta Mater., 2010, vol. 58, pp. 4110–19. https://doi.org/10.1016/j.actamat.2010.03.041.10.1016/j.actamat.2010.03.041 ↗
23. M. Yamaguchi, V. Paidar, D.P. Pope, and V. Vitek: Philos. Mag. A, 1982, vol. 45, pp. 867–82. https://doi.org/10.1080/01418618208239909.10.1080/01418618208239909 ↗
24. F.D. León-Cázares, R. Schlütter, T. Jackson, E.I. Galindo-Nava, and C.M.F. Rae: Acta Mater., 2020, vol. 182, pp. 47–59.10.1016/j.actamat.2019.10.033 ↗
25. D.C. Lv, D. McAllister, M.J. Mills, and Y. Wang: Acta Mater., 2016, vol. 118, pp. 350–61. https://doi.org/10.1016/j.actamat.2016.07.055.10.1016/j.actamat.2016.07.055 ↗
26. T. Mann, M.G. Fahrmann, and M.S. Titus: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 4188–4206. https://doi.org/10.1007/s11661-022-06797-w.10.1007/s11661-022-06797-w ↗
27. M. Kumar and V.K. Vasudevan: Acta Mater., 1997, vol. 45, pp. 3203–22. https://doi.org/10.1016/S1359-6454(97)00007-4.10.1016/S1359-6454(97)00007-4 ↗
28. M. Kumar and V.K. Vasudevan: Acta Mater., 1996, vol. 44, pp. 4865–80. https://doi.org/10.1016/S1359-6454(96)00092-4.10.1016/S1359-6454(96)00092-4 ↗
29. X. Gao, R. Hu, T. Zhang, J. Li, L. Yuan, and J. Kong: Mater. Charact., 2016, vol. 111, pp. 86–92. https://doi.org/10.1016/j.matchar.2015.11.015.10.1016/j.matchar.2015.11.015 ↗
30. H.T. Vo, K. Dang, F. Teng, M. Schneider, B.P. Eftink, S.A. Maloy, J.D. Tucker, L. Capolungo, and P. Hosemann: Mater. Des., 2021, https://doi.org/10.1016/j.matdes.2021.109820.10.1016/j.matdes.2021.109820 ↗
31. J.W. Christian and D.E. Laughlin: Acta Metall., 1988, vol. 36, pp. 1617–42. https://doi.org/10.1016/0001-6160(88)90230-1.10.1016/0001-6160(88)90230-1 ↗
32. M.G. Fahrmann: Proceedinsg of the ASME TurboExpo 2021 Conference, paper GT 2021-59619.
33. M.G. Fahrmann, S.K. Srivastava, and L.M. Pike: MATEC Web of Conferences, vol. 14, 2014. https://doi.org/10.1051/matecconf/20141417004.10.1051/matecconf/20141417004 ↗
34. N. Tsuno, S. Shimabayashi, K. Kakehi, C.M.F. Rae, and R.C. Reed: Proceedings of the International Symposium on Superalloys, 2008, pp. 433–42. https://doi.org/10.7449/2008/Superalloys_2008_433_442.10.7449/2008/Superalloys_2008_433_442 ↗
35. A. Verma, J.B. Singh, S.D. Kaushik, and V. Siruguri: J. Alloys Compd., 2020, vol. 813, p. 152195. https://doi.org/10.1016/j.jallcom.2019.152195.10.1016/j.jallcom.2019.152195 ↗
36. J. Song, R. Field, A. Clarke, Y. Fu, and M. Kaufman: Acta Mater., 2019, vol. 165, pp. 362–72. https://doi.org/10.1016/j.actamat.2018.11.063.10.1016/j.actamat.2018.11.063 ↗
37. J.W. Edington: Practical Electron Microscopy in Materials Science, Van Nostrand Reinhold Co., New York, 1976.
38. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–64. https://doi.org/10.1016/0001-6160(88)90139-3.10.1016/0001-6160(88)90139-3 ↗
39. L.P. Freund, O.M.D.M. Messé, J.S. Barnard, M. Göken, S. Neumeier, and C.M.F. Rae: Acta Mater., 2017, vol. 123, pp. 295–304. https://doi.org/10.1016/j.actamat.2016.10.048.10.1016/j.actamat.2016.10.048 ↗
40. L. Kovarik, R.R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang, and M.J. Mills: Prog. Mater. Sci., 2009, vol. 54, pp. 839–73. https://doi.org/10.1016/j.pmatsci.2009.03.010.10.1016/j.pmatsci.2009.03.010 ↗
41. M. Kolbe: Mater. Sci. Eng. A, 2001, vol. 319–21, pp. 383–87. https://doi.org/10.1016/S0921-5093(01)00944-3.10.1016/S0921-5093(01)00944-3 ↗