journal article·2023-05

Improved Tensile Properties of Micro-grain Casting K447A Alloy

Yue Wang, Xitao Wang, Rui Liu, Pinpin Hu, Chengbo Xiao, Jinshan He

Publisher page

Abstract

Micro-grain K447A superalloy with grain refined to 54 μm and yield strength up to 1022 MPa has been successfully fabricated in this work, whose strength is 200 MPa higher than that of conventional casting K447A. Owing to the bimodal distribution of γ′, two dislocation mechanisms act simultaneously at the initial stage of plastic deformation. That is, dislocations cut γ′ with radius less than 100 nm but bypass γ′ over 100 nm. Based on the deformation mechanisms of γ′ with different sizes, a frequency-weighted precipitation strengthening calculation method has been proposed to predict the contribution of precipitation strengthening accurately. Yield strength predicted by this method is in good agreement with experimental results with maximum error of 4.0 pct. Strength calculation indicates that micro-grain casting process improves the yield strength mainly by increasing the volume fraction of γ′ from 34.2 to 51.6 pct and reducing the grain size from 5 mm to 54 μm, compared with the conventional one.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Additive Manufacturing Materials and Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. L.N. Li, X.F. Gong, C.S. Wang, Y.S. Wu, H.Y. Yu, H.J. Su, and L.Z. Zhou: Acta Metall. Sin. (Engl. Lett.), 2020, vol. 34, pp. 872–84.10.1007/s40195-020-01139-4 ↗
2. H.Y. Bor, C.N. Wei, R.R. Jeng, and P.Y. Ko: Mater. Chem. Phys., 2008, vol. 109, pp. 334–41.10.1016/j.matchemphys.2007.11.041 ↗
3. H.Y. Bor, C. Hsu, and C.N. Wei: Mater. Chem. Phys., 2004, vol. 84, pp. 284–90.10.1016/j.matchemphys.2003.08.014 ↗
4. L.F. Norris, J.R. Brinegar, and L. Rozenberg: Superalloys Proc. Int. Symp., 5th, 1984, pp. 23–32.10.7449/1984/Superalloys_1984_23_32 ↗
5. P. Neil Agarwal and C.A. MacIntyre: SAE Trans., 1984, vol. 93, pp. 6–364.
6. H. Benson and M. Woulds: Superalloys Proc. Int. Symp., 5th, 1984, pp. 3–12.
7. J.H. Liao, H.Y. Bor, C.G. Chao, and T.F. Liu: Mater. Trans., 2010, vol. 51, pp. 810–17.10.2320/matertrans.M2009331 ↗
8. J.H. Liao, H.Y. Bor, C.G. Chao, and T.F. Liu: Mater. Trans., 2011, vol. 52, pp. 201–09.10.2320/matertrans.M2010299 ↗
9. P.P. Hu, Q.D. Gai, Q. Li, and X. Tang: Mater. Sci. Forum, 2016, vol. 849, pp. 549–56.10.4028/www.scientific.net/MSF.849.549 ↗
10. L. Liu, T.W. Huang, T.H. Xiong, A.M. Yang, Z.L. Zhao, R. Zhang, and J.S. Li: Superalloys 2004, Proc. Int. Symp., 10th, 2004, vol. 19. pp. 493–500.10.7449/2004/Superalloys_2004_493_500 ↗
11. T.H. Xiong, A.M. Yang, Y.P. Guo, W. Liu, and L. Liu: Sci. Technol. Adv. Mater., 2001, vol. 2, pp. 13–7.10.1016/S1468-6996(01)00019-5 ↗
12. C.N. Wei, H.Y. Bor, C.Y. Ma, and T.S. Lee: Mater. Chem. Phys., 2003, vol. 80, pp. 89–93.10.1016/S0254-0584(02)00316-4 ↗
13. B.N. Du, J.X. Yang, C.Y. Cui, and X.F. Sun: Mater. Sci. Eng. A, 2015, vol. 623, pp. 59–67.10.1016/j.msea.2014.11.041 ↗
14. Z.T. Gao, W. Guo, C.W. Zhang, and J.Q. Tan: Mater. Sci. Eng. A, 2017, vol. 682, pp. 156–63.10.1016/j.msea.2016.11.024 ↗
15. J.H. Xu, H. Gruber, R. Boyd, S. Jiang, R.L. Peng, and J.J. Moverare: Materialia, 2020, vol. 10, p. 100657.10.1016/j.mtla.2020.100657 ↗
16. M.R. Ahmadi, E. Povoden-Karadeniz, L. Whitmore, M. Stockinger, A. Falahati, and E. Kozeschnik: Mater. Sci. Eng. A, 2014, vol. 608, pp. 114–22.10.1016/j.msea.2014.04.054 ↗
17. K.L. Hou, M. Wang, M.Q. Ou, H.Z. Li, X.C. Hao, Y.C. Ma, and K. Liu: J. Mater. Sci. Technol., 2021, vol. 68, pp. 40–52.10.1016/j.jmst.2020.08.001 ↗
18. B.D. Fu, K. Du, G.M. Han, C.Y. Cui, and J.X. Zhang: Mater. Lett., 2015, vol. 152, pp. 272–75.10.1016/j.matlet.2015.03.142 ↗
19. J. Xie, J.J. Yu, X.F. Sun, T. Jin, and Y.H. Yang: Acta Metall. Sin., 2015, vol. 51, pp. 943–50.
20. P. Zhang, Y. Yuan, Z.H. Gao, Y.F. Gu, J. Li, J.B. Yan, X.F. Gong, J.T. Lu, X.B. Shi, and B.Q. Fu: J. Alloys Compd., 2021, vol. 862, p. 158478.10.1016/j.jallcom.2020.158478 ↗
21. Z.W. Lian, J.J. Yu, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 489, pp. 227–33.10.1016/j.msea.2008.02.013 ↗
22. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40, pp. 1588–603.10.1007/s11661-009-9858-5 ↗
23. L.M. Tan, Y.P. Li, W.K. Deng, Y. Liu, F. Liu, Y. Nie, and L. Jiang: J. Alloys Compd., 2019, vol. 804, pp. 322–30.10.1016/j.jallcom.2019.07.002 ↗
24. C. Joseph, C. Persson, and M. Hörnqvist Colliander: Mater. Sci. Eng. A, 2017, vol. 679, pp. 520–30.10.1016/j.msea.2016.10.048 ↗
25. A.J. Goodfellow: Metall. Mater. Trans. A, 2018, vol. 34, pp. 1793–808.
26. D. Raynor and J.M. Slicock: Met. Sci. J., 1970, vol. 4, pp. 121–30.10.1179/msc.1970.4.1.121 ↗
27. A.J. Goodfellow, E.I. Galindo-Nava, C. Schwalbe, and H.J. Stone: Mater. Des., 2019, vol. 173, p. 107760.10.1016/j.matdes.2019.107760 ↗
28. E.I. Galindo-Nava, L.D. Connor, and C.M.F. Rae: Acta Mater., 2015, vol. 98, pp. 377–90.10.1016/j.actamat.2015.07.048 ↗
29. A.J. Goodfellow, E.I. Galindo-Nava, K.A. Christofidou, N.G. Jones, C.D. Boyer, T.L. Martin, P.A.J. Bagot, M.C. Hardy, and H.J. Stone: Acta Mater., 2018, vol. 153, pp. 290–302.10.1016/j.actamat.2018.04.064 ↗
30. Q.H. Fang, L. Li, J. Li, H.Y. Wu, Z.W. Huang, B. Liu, Y. Liu, and P.K. Liaw: J. Mech. Phys. Solids, 2019, vol. 122, pp. 177–89.10.1016/j.jmps.2018.09.010 ↗
31. J.Y. Guédou, A.I. Epishin, T. Link, B. Fedelich, I.L. Svetlov, E.R. Golubovskiy, and J. Choné: MATEC Web Conf., 2014, vol. 14, p. 08003.10.1051/matecconf/20141400001 ↗
32. I. Sulak, K. Obrtlik, and L. Celko: Kovove Mater., 2016, vol. 54, pp. 471–81.10.4149/km_2016_6_471 ↗
33. M.T. Kim, S.Y. Chang, and J.B. Won: Mater. Sci. Eng. A, 2006, vol. 441, pp. 126–34.10.1016/j.msea.2006.09.060 ↗
34. T. Yang, Y.L. Zhao, Z.B. Jiao, J. Wei, and J.X. Cai: Science, 2018, vol. 362, pp. 933–37.10.1126/science.aas8815 ↗
35. K. Hou, M. Ou, M. Wang, X.C. Hao, Y.C. Ma, and K. Liu: Mater. Sci. Eng. A, 2021, vol. 820, p. 141588.10.1016/j.msea.2021.141588 ↗
36. N. Zhou, C. Shen, M.J. Mills, J. Li, and Y.Z. Wang: Acta Mater., 2011, vol. 59, pp. 3484–497.10.1016/j.actamat.2011.02.022 ↗
37. A. Vattré, B. Devincre, and A. Roos: Intermetallics, 2009, vol. 17, pp. 988–94.10.1016/j.intermet.2009.04.007 ↗
38. P. Zhang, Y. Yuan, J. Li, Y.F. Xu, X.L. Song, and G.X. Yang: Mater. Sci. Eng. A, 2017, vol. 702, pp. 343–49.10.1016/j.msea.2017.07.025 ↗
39. F. Lu, S. Antonov, S. Lu, J.C. Zhang, L.F. Li, D. Wang, J. Zhang, and Q. Feng: Acta Mater., 2022, vol. 233, p. 117979.10.1016/j.actamat.2022.117979 ↗
40. X.P. Tan, J.L. Liu, and T. Jin: Mater. Sci. Eng. A, 2013, vol. 580, pp. 21–35.10.1016/j.msea.2013.05.028 ↗
41. T.M. Pollock and A.S. Argon: Acta Metall. Mater., 1992, vol. 40, pp. 1–30.10.1016/0956-7151(92)90195-K ↗
42. U. Bayerlein and H.G. Sockel: Mater. Sci. Eng. A, 1991, vol. 141, pp. 179–87.10.1016/0921-5093(91)90768-I ↗
43. K. Zhang, B. Holmedal, T. Mánik, and A. Saai: Int. J. Plast., 2019, vol. 114, pp. 144–60.10.1016/j.ijplas.2018.10.015 ↗
44. Q. Zhu, C.J. Wang, K. Yang, G. Chen, H.Y. Qin, and P. Zhang: J. Mater. Sci. Technol., 2020, vol. 40, pp. 146–57.10.1016/j.jmst.2019.09.020 ↗
45. B. Clausen, T. Lorentzen, and T. Leffers: Acta Mater., 1998, vol. 46, pp. 3087–98.10.1016/S1359-6454(98)00014-7 ↗
46. M. Yoshinao, O. Shouichi, H. Noboru, Y. Masayoshi, and S. Tomoo: Trans. Jpn. Inst. Met., 1986, vol. 27, pp. 656–64.10.2320/matertrans1960.27.656 ↗
47. H.A. Roth, C.L. Davis, and R.C. Thomson: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1329–35.10.1007/s11661-997-0268-2 ↗