journal article·2022-09

Improvement of Creep Behavior Prediction Using Threshold Stress and Tensile Properties: Introduction of the TTC Relations

Xu Zhao, Xuming Niu, Yingdong Song, Zhigang Sun

Publisher page

Abstract

In this article, the deformation and rupture behaviors of nickel-based superalloy GH4169 were analyzed. The high stress exponent was rationalized by introducing the threshold stress, and the true deformation mechanism was elucidated as climb-controlled dislocation creep. Microstructure study revealed that the creep fracture mode gradually changes from intergranular brittle fracture to transgranular ductile fracture as the stress decreases. Intergranular fracture at high stress can be mainly attributed to cavity damage, while microstructural degradation led to transgranular fracture at low stress. In order to accurately predict and evaluate the creep behavior of material, the novel relations (TTC relations) between the threshold stress, tensile properties, and creep behavior were established. Experimental results of GH4169, Zr-2.5Nb alloy, Fe-Cr-Ni alloy, and 9Cr-9Mo steel from different literature sources were used to verify the accuracy of the TTC relations. It was demonstrated that the TTC relations were better at predicting the creep behavior than the Wilshire equations. Finally, the theoretical and experimental threshold stresses were compared and the micromechanism of the TTC relations was analyzed.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Fatigue and fracture mechanics · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (78)

Show source-provided references
1. T. Ni and J. Dong: Mater. Sci. Eng. A, 2017, vol. 700, pp. 406–15.10.1016/j.msea.2017.06.032 ↗
2. K. Chen, J. Dong, Z. Yao, T. Ni, and M. Wang: Mater. Sci. Eng. A, 2018, vol. 738, pp. 308–22.10.1016/j.msea.2018.09.088 ↗
3. Y.X. Chen, W. Yan, W. Wang, Y.Y. Shan, and K. Yang: Mater. Sci. Eng. A, 2012, vol. 534, pp. 649–53.10.1016/j.msea.2011.12.022 ↗
4. Y. Zhang, H. Jing, L. Xu, L. Zhao, Y. Han, and Y. Zhao: Mater. Sci. Eng. A, 2017, vol. 686, pp. 102–12.10.1016/j.msea.2017.01.002 ↗
5. S. Alsagabi, T. Shrestha, and I. Charit: J. Nucl. Mater., 2014, vol. 453, pp. 151–57.10.1016/j.jnucmat.2014.06.033 ↗
6. T. Sakthivel, S.P. Selvi, and K. Laha: Mater. Sci. Eng. A, 2015, vol. 640, pp. 61–71.10.1016/j.msea.2015.05.068 ↗
7. H.D. Chandler: Mater. Sci. Eng. A, 2020, vol. 771, 138622.10.1016/j.msea.2019.138622 ↗
8. W.J. Kim and H.T. Jeong: J. Mater. Res. Technol., 2020, vol. 9, pp. 5134–43.10.1016/j.jmrt.2020.03.030 ↗
9. K. Gouriet, P. Cordier, F. Garel, C. Thoraval, S. Demouchy, A. Tommasi, and P. Carrez: Earth Planet. Sci. Lett., 2019, vol. 506, pp. 282–91.10.1016/j.epsl.2018.10.049 ↗
10. M. Whittaker, W. Harrison, C. Deen, C. Rae, and S. Williams: Materials (Basel). DOI:https://doi.org/10.3390/ma10010061.10.3390/ma10010061 ↗
11. G. Han, J. Yu, X. Sun, and Z. Hu: J. Mater. Sci. Technol., 2012, vol. 28, pp. 439–45.10.1016/S1005-0302(12)60080-2 ↗
12. A. Ghatak and P.S. Robi: Mater. Sci. Eng. A, 2015, vol. 648, pp. 418–27.10.1016/j.msea.2015.09.087 ↗
13. L. Zhu, X. Liu, P. Fan, Y. Dan, and L. Wang: Mater. High Temp., 2019, vol. 36, pp. 548–61.10.1080/09603409.2019.1662981 ↗
14. P.J. Ennis, A. Zielinska-Lipiec, O. Wachter, and A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, pp. 4901–17.10.1016/S1359-6454(97)00176-6 ↗
15. T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, K.K. Rink, and U. Sahaym: J. Nucl. Mater., 2012, vol. 423, pp. 110–19.10.1016/j.jnucmat.2012.01.005 ↗
16. T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, and K.K. Rink: Mater. Sci. Eng. A, 2013, vol. 565, pp. 382–91.10.1016/j.msea.2012.12.031 ↗
17. P. Prakash, J. Vanaja, G.V.P. Reddy, K. Laha, and G.V.S.N. Rao: J. Nucl. Mater., 2019, vol. 520, pp. 65–77.10.1016/j.jnucmat.2019.04.014 ↗
18. B. Xiao, L. Xu, L. Zhao, H. Jing, Y. Han, and Y. Zhang: Mater. Sci. Eng. A, 2018, vol. 711, pp. 434–47.10.1016/j.msea.2017.11.061 ↗
19. R. Hosseini, M. Morakabati, S.M. Abbasi, and A. Hajari: Mater. Sci. Eng. A, 2017, vol. 696, pp. 155–65.10.1016/j.msea.2017.04.068 ↗
20. K. Guguloth, R. Mitra, S.G. Chowdhury, and J. Swaminathan: Mater. Sci. Eng. A, 2018, vol. 721, pp. 286–302.10.1016/j.msea.2018.02.035 ↗
21. K. Guguloth, M. Ghosh, J. Swaminathan, and R. Mitra: Mater. Sci. Eng. A, 2020, vol. 791, 139681.10.1016/j.msea.2020.139681 ↗
22. S. Sanaye and S. Hosseini: Energy Rep., 2020, vol. 6, pp. 1268–85.10.1016/j.egyr.2020.05.008 ↗
23. A. Loghman and M. Moradi: Int. J. Press. Vessel. Pip., 2017, vol. 151, pp. 11–19.10.1016/j.ijpvp.2017.02.003 ↗
24. K. Maruyama, F. Abe, H. Sato, J. Shimojo, N. Sekido, and K. Yoshimi: Int. J. Press. Vessel. Pip., 2018, vol. 159, pp. 93–100.10.1016/j.ijpvp.2017.11.013 ↗
25. S. Hai, S.-H. Oh, and H.-S. Yu: Eng. Fail. Anal., 2020, vol. 113, 104558.10.1016/j.engfailanal.2020.104558 ↗
26. K. Maruyama, N. Sekido, and K. Yoshimi: Mater. Sci. Eng. A, 2019, vol. 749, pp. 223–34.10.1016/j.msea.2019.02.003 ↗
27. A.A. Ayubali, A. Singh, B.P. Shanmugavel, and K.A. Padmanabhan: Int. J. Mech. Sci., 2021, vol. 202–203, 106505.10.1016/j.ijmecsci.2021.106505 ↗
28. M. Evans and T. Williams: Int. J. Press. Vessel. Pip., 2019, vol. 172, pp. 153–65.10.1016/j.ijpvp.2019.03.032 ↗
29. M. Evans: Appl. Math. Model., 2016, vol. 40, pp. 10342–59.10.1016/j.apm.2016.07.013 ↗
30. Z. Abdallah, K. Perkins, and S. Williams: Mater. Sci. Eng. A, 2012, vol. 550, pp. 176–82.10.1016/j.msea.2012.04.054 ↗
31. S.C. Kim, J.H. Shim, W.S. Jung, and Y.S. Choi: Met. Mater. Int., 2019, vol. 25, pp. 713–22.10.1007/s12540-018-00214-x ↗
32. W.G. Kim, J.Y. Park, S.J. Kim, E.S. Kim, and J. Jang: J. Mech. Sci. Technol., 2018, vol. 32, pp. 4165–72.10.1007/s12206-018-0814-4 ↗
33. J.K. Wright, T.M. Lillo, R.N. Wright, W.G. Kim, I.J. Sah, E.S. Kim, J.Y. Park, and M.H. Kim: Nucl. Eng. Des., 2018, vol. 329, pp. 142–46.10.1016/j.nucengdes.2017.07.014 ↗
34. B. Wilshire and A.J. Battenbough: Mater. Sci. Eng. A, 2007, vol. 443, pp. 156–66.10.1016/j.msea.2006.08.094 ↗
35. W. Ye, X. Hu, and Y. Song: Mater. Sci. Eng. A, DOI:https://doi.org/10.1016/j.msea.2019.138847.10.1016/j.msea.2019.138847 ↗
36. B. Wilshire and P.J. Scharning: Scripta Mater., 2007, vol. 56, pp. 701–04.10.1016/j.scriptamat.2006.12.033 ↗
37. M.M. de Oliveira, A.A. Couto, G.F.C. Almeida, D.A.P. Reis, N.B. de Lima, and R. Baldan: Met., 2019, vol. 9, p. 15.
38. J.E. Bird, A.K. Mukherjee, J.E. Dorn: Quantitative Relation Between Properties and Microstructure. Isr. Univ. Press Jerusalem 1969.
39. K. Wang, M.Q. Li, J. Luo, and C. Li: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4723–31.10.1016/j.msea.2011.02.081 ↗
40. S.P. Deshmukh, R.S. Mishra, and K.L. Kendig: Mater. Sci. Eng. A, 2004, vol. 381, pp. 381–85.10.1016/j.msea.2004.05.025 ↗
41. S.P. Deshmukh, R.S. Mishra, and I.M. Robertson: Mater. Sci. Eng. A, 2010, vol. 527, pp. 2390–97.10.1016/j.msea.2009.12.015 ↗
42. Y. Huang and T.G. Langdon: J. Met., 2003, vol. 55, pp. 15–20.
43. Y. Li and T.G. Langdon: Acta Mater., 1999, vol. 47, pp. 3395–403.10.1016/S1359-6454(99)00219-0 ↗
44. A. Chamanfar, L. Sarrat, M. Jahazi, M. Asadi, A. Weck, and A.K. Koul: Mater. Des., 2013, vol. 52, pp. 791–800.10.1016/j.matdes.2013.06.004 ↗
45. X.D. Lu, J.H. Du, and Q. Deng: Mater. Sci. Eng. A, 2013, vol. 559, pp. 623–28.10.1016/j.msea.2012.09.001 ↗
46. S. Zhang, X. Lin, L. Wang, X. Yu, H. Yang, L. Lei, and W. Huang: Mater. Sci. Eng. A, 2021, vol. 803, 140702.10.1016/j.msea.2020.140702 ↗
47. H. Qin, Z. Bi, H. Yu, G. Feng, R. Zhang, X. Guo, H. Chi, J. Du, and J. Zhang: Mater. Sci. Eng. A, 2018, vol. 728, pp. 183–95.10.1016/j.msea.2018.05.016 ↗
48. J.-G. Liu, X.-J. Yang, Y.-Y. Feng, and P. Cui: Chin. J. Phys., 2020, vol. 68, pp. 533–41.10.1016/j.cjph.2020.10.011 ↗
49. N.Q. Vo, C.H. Liebscher, M.J.S. Rawlings, M. Asta, and D.C. Dunand: Acta Mater., 2014, vol. 71, pp. 89–99.10.1016/j.actamat.2014.02.020 ↗
50. B.F. Dyson: Mater. Sci. Technol., 2009, vol. 25, pp. 213–20.10.1179/174328408X369348 ↗
51. M.E. Krug and D.C. Dunand: Acta Mater., 2011, vol. 59, pp. 5125–34.10.1016/j.actamat.2011.04.044 ↗
52. S. Spigarelli: Int. J. Press. Vessel. Pip., 2013, vol. 101, pp. 64–71.10.1016/j.ijpvp.2012.10.005 ↗
53. R. Mitra, K. Sadananda, and C.R. Feng: Intermetallics, 2004, vol. 12, pp. 827–36.10.1016/j.intermet.2004.02.033 ↗
54. R. Sharghi-Moshatghin and S. Asgari: J. Alloys Compd., 2004, vol. 368, pp. 144–51.10.1016/S0925-8388(03)00699-6 ↗
55. W.T. Geng, D.H. Ping, Y.F. Gu, C.Y. Cui, and H. Harada: Phys. Rev. B, 2007, vol. 76, pp. 1–10.10.1103/PhysRevB.76.224102 ↗
56. L. Feng, D. McAllister, C.H. Zenk, M.J. Mills, and Y. Wang: Miner. Met. Mater. Ser., 2020, vol. 24, pp. 669–79.
57. X. Lu, J. Du, Q. Deng, and J. Zhuang: J. Mater. Res. Technol., 2014, vol. 3, pp. 107–13.10.1016/j.jmrt.2014.03.003 ↗
58. A. Drexler, A. Fischersworring-Bunk, B. Oberwinkler, W. Ecker, and H.P. Gänser: Int. J. Plast., 2018, vol. 105, pp. 62–73.10.1016/j.ijplas.2017.11.003 ↗
59. X. Zhao, X. Niu, Y. Song, and Z. Sun: Fatig. Fract. Eng. Mater. Struct., 2022, vol. 45, pp. 530–45.10.1111/ffe.13616 ↗
60. S.N. Zhevnenko: Metall. Mater. Trans. A, 2021, vol. 282, pp. 3–6.
61. T. Sritharan and H. Jones: Acta Metall., 1979, vol. 27, pp. 1293–300.10.1016/0001-6160(79)90145-7 ↗
62. J. Fiala, J. Novotný, and J. Čadek: Mater. Sci. Eng., 1983, vol. 60, pp. 195–206.10.1016/0025-5416(83)90002-2 ↗
63. J. Fiala and J. Čadek: Mater. Sci. Eng., 1985, vol. 75, pp. 117–26.10.1016/0025-5416(85)90183-1 ↗
64. I.G. Crossland and R.B. Jones: Met. Sci., 1977, vol. 11, pp. 504–508.10.1179/030634577790432848 ↗
65. R.S. Mishra, H. Jones, and G.W. Greenwood: Philos. Mag. A, 1989, vol. 60, pp. 581–90.10.1080/01418618908212004 ↗
66. F.R.N. Nabarro: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 213–18.10.1007/s11661-002-0083-8 ↗
67. P. Kumar, M.E. Kassner, and T.G. Langdon: J. Mater. Sci., 2008, vol. 43, pp. 4801–10.10.1007/s10853-008-2680-4 ↗
68. P. Yavari and T.G. Langdon: Acta Metall., 1982, vol. 30, pp. 2181–96.10.1016/0001-6160(82)90139-0 ↗
69. F.A. Mohamed: Mater. Sci. Eng. A, 1998, vol. 245, pp. 242–56.10.1016/S0921-5093(97)00725-9 ↗
70. T.G. Langdon: Mater. Trans. JIM, 1996, vol. 37, pp. 359–62.10.2320/matertrans1989.37.359 ↗
71. T.G. Langdon: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 249–59.10.1007/s11661-002-0087-4 ↗
72. B. Burton: Philos. Mag., 1972, vol. 25, pp. 645–59.10.1080/14786437208228897 ↗
73. W. Blum and W. Maier: Phys. Status Solidi, 1999, vol. 171, pp. 467–74.10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
74. B. Wilshire: Metall. Mater. Trans. A., 2002, vol. 33A, pp. 241–48.10.1007/s11661-002-0086-5 ↗
75. H. Burt and B. Wilshire: Metall. Mater. Trans. A., 2004, vol. 35A, pp. 1691–701.10.1007/s11661-004-0078-8 ↗
76. M. Evans: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 6593–607.10.1007/s11661-016-3750-x ↗
77. M.T. Whittaker and B. Wilshire: Mater. Sci. Technol., 2011, vol. 27, pp. 642–47.10.1179/026708310X520529 ↗
78. M. Evans: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 937–47.10.1007/s11661-014-2655-9 ↗