journal article·2022-06

Permanent Strength of Metals: A Case Study on FCC Metals Processed by Severe Plastic Deformation

Takayuki Koizumi, Kazuki Ogoda, Mitsutoshi Kuroda

Publisher page

Abstract

The present study emphasizes the importance of the direct evaluation of the athermal strength of structural materials, which is the time-independent material strength that corresponds to the basic capability to bear stresses caused by external forces permanently, and we call it the “permanent strength.” The present experimental study, taking FCC metals processed by severe plastic deformation (SPD), shows that the permanent strength is unexpectedly much lower than the flow stress temporally observed in a standard tensile test. More than half of the observed flow stress corresponds to the time-dependent thermal strength. Furthermore, the grain refinement associated with SPD processing never contributes to the augmentation of the permanent strength, i.e., the Hall–Petch relation is not applicable to as-SPDed materials. In contrast to aluminum, for copper, the low permanent strength produced by SPD is never revived by subsequent annealing. These observations elicit the general view that we should know the permanent strength of structural materials, not limited to SPD-processed metals, because we must confirm that the permanent strength is higher than the allowable stress in structural design to ensure the use of the structure within its elastic range in normal environments.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · High-Velocity Impact and Material Behavior

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. Seeger, J. Diehl, S. Mader, and H. Rebstock: Philos. Mag., 1957, vol. 2, pp. 323–50.10.1080/14786435708243823 ↗
2. K. Ogawa and T. Nojima: J. Soc. Mater. Sci. Jpn., 1988, vol. 37, pp. 1171–77.10.2472/jsms.37.1171 ↗
3. K. Ogawa, H. Kobayashi, K. Yoshida, and F. Sugiyama: Zairyo., 1994, vol. 43, pp. 304–09.10.3323/jcorr1991.43.706 ↗
4. J.-H. Park, Y. Tomota, S. Takagi, S. Ishikawa, and T. Shimizu: Tetsu-to-Hagane., 2001, vol. 87, pp. 657–64.10.2355/tetsutohagane1955.87.10_657 ↗
5. N. Tsuchida, Y. Tomota, H. Moriya, O. Umezawa, and K. Nagai: Acta Mater., 2001, vol. 49, pp. 3029–38.10.1016/S1359-6454(01)00197-5 ↗
6. N. Tsuchida, Y. Izaki, T. Tanaka, and K. Fukaura: Tetsu-to-Hagané., 2011, vol. 97, pp. 201–08.10.2355/tetsutohagane.97.201 ↗
7. N. Tsuji, Y. Ito, Y. Saito, and Y. Minamino: Scripta Mater., 2002, vol. 47, pp. 893–99.10.1016/S1359-6462(02)00282-8 ↗
8. X. Huang, N. Hansen, and N. Tsuji: Science., 2006, vol. 312, pp. 249–51.10.1126/science.1124268 ↗
9. N. Kamikawa, X. Huang, N. Tsuji, and N. Hansen: Acta Mater., 2009, vol. 57, pp. 4198–208.10.1016/j.actamat.2009.05.017 ↗
10. S. Gao, M. Chen, S. Chen, N. Kamikawa, A. Shibata, and N. Tsuji: Mater. Trans., 2014, vol. 55, pp. 73–77.10.2320/matertrans.MA201317 ↗
11. S. Goel, Y. Wang, Y.M. Zhu, Y. Liu, and J.T. Wang: Int. J. Plast., 2021, vol. 138, p. 102939.10.1016/j.ijplas.2021.102939 ↗
12. T. Koizumi and M. Kuroda: Mater. Sci. Eng. A., 2018, vol. 710, pp. 300–08.10.1016/j.msea.2017.10.077 ↗
13. J. Gubicza, N.Q. Chinh, G. Krállics, I. Schiller, and T. Ungár: Curr. Appl. Phys., 2006, vol. 6, pp. 194–99.10.1016/j.cap.2005.07.039 ↗
14. J. Čížek, M. Janeček, T. Krajňák, J. Stráská, P. Hruška, J. Gubicza, and H. Kim: Acta Mater., 2016, vol. 105, pp. 258–72.10.1016/j.actamat.2015.12.039 ↗
15. T. Krajňák, P. Minárik, J. Gubicza, K. Máthis, R. Kužel, and M. Janeček: Mater. Charact., 2017, vol. 123, pp. 282–93.10.1016/j.matchar.2016.11.044 ↗
16. J. May, H.W. Höppel, and M. Göken: Scripta Mater., 2005, vol. 53, pp. 189–94.10.1016/j.scriptamat.2005.03.043 ↗
17. A.S. Khan and C.S. Meredith: Int. J. Plast., 2010, vol. 26, pp. 189–203.10.1016/j.ijplas.2009.07.002 ↗
18. C.S. Meredith and A.S. Khan: Int. J. Plast., 2012, vol. 30–31, pp. 202–17.10.1016/j.ijplas.2011.10.006 ↗
19. M.S. Mohebbi, A. Akbarzadeh, B.H. Kim, and S.K. Kim: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 5442–50.10.1007/s11661-014-2534-4 ↗
20. C.S. Meredith and A.S. Khan: J. Mater. Proc. Tech., 2015, vol. 219, pp. 257–70.10.1016/j.jmatprotec.2014.12.024 ↗
21. D. Rodríguez-Galán, I. Sabirov, and J. Segurado: Int. J. Plast., 2015, vol. 70, pp. 191–205.10.1016/j.ijplas.2015.04.002 ↗
22. J. Xu, J. Li, L. Shi, D. Shan, and B. Guo: Mater. Charact., 2015, vol. 109, pp. 181–88.10.1016/j.matchar.2015.10.003 ↗
23. F. Kabirian, A.S. Khan, and T. Gnäupel-Herlod: J. Alloys Compd., 2016, vol. 673, pp. 327–35.10.1016/j.jallcom.2016.02.145 ↗
24. T. Koizumi, A. Kurumatani, and M. Kuroda: Sci. Rep., 2020, vol. 10, p. 14090.10.1038/s41598-020-70160-5 ↗
25. F.R. Larson and J. Miller: Trans. ASME., 1952, vol. 74, pp. 765–71.
26. V.M. Segal: Mater. Sci. Eng. A, 1995, vol. 197, pp. 157–64.10.1016/0921-5093(95)09705-8 ↗
27. Y. Iwahashi, Z. Horita, M. Nemoto, J. Wang, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
28. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol. 46, pp. 3317–31.10.1016/S1359-6454(97)00494-1 ↗
29. N. Kamikawa, N. Tsuji, X. Huang, and N. Hansen: Acta Mater., 2006, vol. 54, pp. 3055–66.10.1016/j.actamat.2006.02.046 ↗
30. A. Zhilyaev, B.-K. Kim, J. Szpunar, M. Baró, and T.G. Langdon: Mater. Sci. Eng. A, 2005, vol. 391, pp. 377–89.10.1016/j.msea.2004.09.030 ↗
31. E.A. El-Danaf: Mater. Sci. Eng. A, 2008, vol. 487, pp. 189–200.10.1016/j.msea.2007.10.013 ↗
32. G. Williamson and W. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
33. S. Takaki, T. Masumura, and T. Tsuchiyama: ISIJ Int., 2018, vol. 58, pp. 2354–56.10.2355/isijinternational.ISIJINT-2018-517 ↗
34. G. Williamson and R. Smallman: Phil. Mag., 1956, vol. 1, pp. 34–46.10.1080/14786435608238074 ↗
35. K. Levenberg: Q. Appl. Math., 1944, vol. 2, pp. 164–68.10.1090/qam/10666 ↗
36. D.W. Marquardt: J. Soc. Ind. Appl. Math., 1963, vol. 11, pp. 431–41.10.1137/0111030 ↗
37. M.A. Muñoz-Morris, C. Garcia Oca, and D.G. Morris: Scripta Mater., 2003, vol. 48, pp. 213–18.10.1016/S1359-6462(02)00501-8 ↗
38. Watanabe, H. Hiraide, Z. Zhang, and R. Monzen: J. Soc. Mater. Sci. Jpn., 2005, vol. 54, pp. 717–23.10.2472/jsms.54.717 ↗
39. E. Sato, T. Yamada, H. Tanaka, and I. Jimbo: Mater. Trans., 2006, vol. 47, pp. 1121–26.10.2320/matertrans.47.1121 ↗
40. F. Nishijima, K. Nomura, C. Watanabe, and R. Monzen: J. Jpn. Inst. Met. Mater., 2008, vol. 72, pp. 427–32.10.2320/jinstmet.72.427 ↗
41. R. Monzen and C. Watanabe: Mater. Sci. Eng. A., 2008, vol. 483–484, pp. 117–19.10.1016/j.msea.2006.12.163 ↗
42. K. Hariharan, P. Dubey, and J. Jain: Mater. Sci. Eng. A., 2016, vol. 673, pp. 250–56.10.1016/j.msea.2016.07.074 ↗
43. Y. Zhao, J. Bingert, Y. Zhu, X. Liao, R. Valiev, Z. Horita, T. Langdon, Y. Zhou, and E. Lavernia: Appl. Phys. Lett., 2008, vol. 92, p. 081903.10.1063/1.2870014 ↗
44. R.Z. Valiev, M.Y. Murashkin, A. Kilmametov, B. Straumal, N.Q. Chinh, and T.G. Langdon: J. Mater. Sci., 2010, vol. 45, pp. 4718–24.10.1007/s10853-010-4588-z ↗
45. A.V. Polyakov, I.P. Semenova, R.Z. Valiev, Y. Huang, and T.G. Langdon: MRS Commun., 2013, vol. 3, pp. 249–53.10.1557/mrc.2013.40 ↗
46. I.-C. Choi, Y.-J. Kim, M.-Y. Seok, B.-G. Yoo, J.-Y. Kim, Y. Wang, and J.-I. Jang: Int. J. Plast., 2013, vol. 41, pp. 53–64.10.1016/j.ijplas.2012.08.008 ↗
47. L. Mishnaevsky and E. Levashov: Comput. Mater. Sci., 2015, vol. 96, pp. 365–73.10.1016/j.commatsci.2014.09.024 ↗
48. P. Sun, E. Cerreta, G. Gray, and J. Bingert: Metall. Mater. Trans. A., 2006, vol. 37A, pp. 2983–94.10.1007/s11661-006-0180-1 ↗
49. L. Su, C. Lu, A. Tieu, L. He, Y. Zhang, and D. Wexler: Mater. Lett., 2011, vol. 65, pp. 514–16.10.1016/j.matlet.2010.10.090 ↗
50. J. Gubicza: Adv. Eng. Mater., 2020, vol. 22, p. 1900507.10.1002/adem.201900507 ↗
51. A. Habibi and M. Ketabchi: Mater. Des., 2012, vol. 34, pp. 483–87.10.1016/j.matdes.2011.07.029 ↗
52. E. Hall: Proc. Phys. Soc. B, 1951, vol. 64, p. 747.10.1088/0370-1301/64/9/303 ↗
53. N. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25–28.
54. D.-H. Kang and T.-W. Kim: Mater. Des., 2010, vol. 31, pp. S54–60.10.1016/j.matdes.2010.01.004 ↗
55. T. Shanmugasundaram, M. Heilmaier, B. Murty, and V.S. Sarma: Mater. Sci. Eng. A., 2010, vol. 527, pp. 7821–25.10.1016/j.msea.2010.08.070 ↗
56. A. Loucif, R.B. Figueiredo, T. Baudin, F. Brisset, R. Chemam, and T.G. Langdon: Mater. Sci. Eng. A, 2012, vol. 532, pp. 139–45.10.1016/j.msea.2011.10.074 ↗
57. N. Stepanov, A. Kuznetsov, G. Salishchev, G. Raab, and R. Valiev: Mater. Sci. Eng. A, 2012, vol. 554, pp. 105–15.10.1016/j.msea.2012.06.022 ↗
58. P. Bazarnik, Y. Huang, M. Lewandowska, and T.G. Langdon: Mater. Sci. Eng. A, 2015, vol. 626, pp. 9–15.10.1016/j.msea.2014.12.027 ↗
59. T. Koizumi and M. Kuroda: Key Eng. Mater., 2016, vol. 725, pp. 202–07.10.4028/www.scientific.net/KEM.725.202 ↗
60. Y. Ito, K. Edalati, and Z. Horita: Mater. Sci. Eng. A, 2017, vol. 679, pp. 428–34.10.1016/j.msea.2016.10.066 ↗
61. R. Tejedor, K. Edalati, J.A. Benito, Z. Horita, and J.M. Cabrera: Mater. Sci. Eng. A, 2019, vol. 743, pp. 597–605.10.1016/j.msea.2018.11.127 ↗
62. D.-L. Zou, L.-F. He, D.-W. Xiao, Y.-W. Zhao, Z.-C. Qiu, L. Chao, and L. Fan: Trans. Nonferrous Met. Soc. China, 2020, vol. 30, pp. 2749–56.10.1016/S1003-6326(20)65417-6 ↗
63. N. Hansen: Scripta Mater., 2004, vol. 51, pp. 801–06.10.1016/j.scriptamat.2004.06.002 ↗
64. T. Tabata, K. Takagi, and H. Fujita: Trans. Jpn. Inst. Met., 1975, vol. 16, pp. 569–79.10.2320/matertrans1960.16.569 ↗
65. M.A. Meyers and K.K. Chawla: Mechanical Behavior of Materials, 2nd ed. Cambridge University Press, London, 2008, p. 272.10.1017/CBO9780511810947 ↗
66. N. Kosarev, M. Khazin, R. Apakashev, and N. Valiev: J. Mater. Sci. Chem. Eng., 2013, vol. 01, pp. 7–10.
67. Z.C. Cordero, B.E. Knight, and C.A. Schuh: Int. Mater. Rev., 2016, vol. 61, pp. 495–512.10.1080/09506608.2016.1191808 ↗
68. G.I. Taylor: Proc. R. Soc. Lond. A., 1934, vol. 145, pp. 362–87.10.1098/rspa.1934.0106 ↗
69. M. Kassner: Acta Mater., 2014, vol. 52, pp. 1–9.10.1016/j.actamat.2003.08.019 ↗
70. Y. Tanaka, S. Takaki, T. Tsuchiyama, and R. Uemori: ISIJ Int., 2018, vol. 58, pp. 1927–33.10.2355/isijinternational.ISIJINT-2018-371 ↗