journal article·2022-04

Revealing the Relationship Between Morphology of Pb-Rich Secondary Phases and Mechanical Properties of Laminated Cu–Pb–Sn/Steel Composite Through CALPHAD and FEA

Bowen Dong, Jinchuan Jie, Bo Peng, Jianping Qu, Zhenpeng Wu, Qiang Wang, Jiahan Zhou, Shichao Liu, Qingchuan Zou, Tongmin Wang, Tingju Li

Publisher page

Abstract

Laminated Cu–Pb–Sn/Steel composites (C/SC) with Pb-rich secondary phases (SPs) in different morphology were prepared by solid–liquid continuous casting compositing (S-LC). SPs transform from network to rod-like to abnormally coarsening morphology with casting temperatures increasing from 1473 K to 1513 K to 1533 K. The prepared C/SC possesses a high-quality interface and high bonding strength due to the existence of the Cu/Fe interdiffusion layer with a thickness of about 0.75 μm. The thickness calculated by CALPHAD is in the range of 0.38 to 1.35 μm which is consistent with experimental results. The mechanical properties of C/SC present a high correlation with the morphology of SPs. C/SC with network and rod-like SPs, respectively, shows the lowest and highest plasticity and carrying capacity. Finite element analysis (FEA) was conducted to simulate the plastic deformation of C/SC. By comparing the experiments with FEA results, the network SPs with high continuity were proven to significantly decrease the tensile strength and elongation of Cu–Pb–Sn alloy layer of C/SC by splitting the matrix. C/SC with rod-like SPs presents the highest mechanical performance due to the minimal damage to matrix. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Microstructure and mechanical properties · Metal Forming Simulation Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. B.W. Dong, J.C. Jie, S.H. Wang, Z.Z. Dong, and T.J. Li: Mater. Lett., 2020, vol. 262, p. 127174.10.1016/j.matlet.2019.127174 ↗
2. A.S. Sharma, N. Mishra, K. Biswas, and B. Basu: Wear., 2013, vol. 306, pp. 138–48.10.1016/j.wear.2013.07.009 ↗
3. V.T. Oksanen, A.J. Lehtovaara, and M.H. Kallio: Wear., 2017, vol. 388–389, pp. 72–80.10.1016/j.wear.2017.05.001 ↗
4. B.W. Dong, S.H. Wang, Z.Z. Dong, J.C. Jie, T.M. Wang, and T.J. Li: J. Mater. Sci. Technol., 2020, vol. 40, pp. 158–67.10.1016/j.jmst.2019.09.025 ↗
5. H. Cui, J. Guo, Y. Su, H. Ding, W. Bi, X. Li, and H. Fu: Mater. Sci. Eng. A., 2007, vol. 448, pp. 49–55.10.1016/j.msea.2006.09.068 ↗
6. C. Dong and B. Wei: Scripta Mater., 1996, vol. 34, pp. 1523–28.10.1016/1359-6462(95)00664-8 ↗
7. Y. Yang, D. Wang, J. Lin, D.F. Khan, G. Lin, and J. Ma: Mater. Des., 2015, vol. 85, pp. 635–39.10.1016/j.matdes.2015.07.082 ↗
8. Y.J. Du, J.T. Xiong, F. Jin, S.W. Li, L. Yuan, D. Feng, J.M. Shi, and J.L. Li: Mater. Sci. Eng. A., 2021, vol. 802, p. 140610.10.1016/j.msea.2020.140610 ↗
9. Z. Sun, H. Shao, X. Niu, and Y. Song: Mater. Sci. Eng. A., 2016, vol. 663, pp. 78–85.10.1016/j.msea.2016.03.075 ↗
10. B.W. Dong, J.C. Jie, X.X. Yao, S.C. Liu, Y.H. Chen, N. Zhong, and T.J. Li: J. Alloys Compd., 2019, vol. 791, pp. 936–46.10.1016/j.jallcom.2019.03.388 ↗
11. B.W. Dong, J.C. Jie, Z.Z. Dong, Y.H. Chen, N. Zhong, T.M. Wang, and T.J. Li: J. Mol. Liq., 2019, vol. 292, p. 111336.10.1016/j.molliq.2019.111336 ↗
12. B.K. Dhindaw, D.M. Stefanescu, A.K. Singh, and P.A. Curreri: Metall. Trans. A., 1988, vol. 19, pp. 2839–46.10.1007/BF02645818 ↗
13. C. Yu, L. Fu, H. Xiao, Q. Lv, and B. Gao: Mater. Sci. Eng. A., 2021, vol. 820, p. 141572.10.1016/j.msea.2021.141572 ↗
14. P. Li, S. Wang, Y. Xia, X. Hao, and H. Dong: J. Mater. Sci. Technol., 2020, vol. 45, pp. 59–69.10.1016/j.jmst.2019.10.041 ↗
15. M. Rao, G. Luo, J. Zhang, Y. Wang, Q. Shen, and L. Zhang: J. Mater. Sci. Technol., 2020, vol. 54, pp. 171–80.10.1016/j.jmst.2020.02.005 ↗
16. H. Chen, H. Nie, W. Wang, J. Zhou, and R. Liu: J. Alloys Compd., 2019, vol. 806, pp. 1445–52.10.1016/j.jallcom.2019.07.133 ↗
17. H.S. Chen, W.X. Wang, H.H. Nie, J. Zhou, Y. Li, and P. Zhang: Vacuum., 2017, vol. 143, pp. 363–70.10.1016/j.vacuum.2017.06.009 ↗
18. J. Jie, C. Liu, S. Wang, B. Dong, S. Liu, and T. Li: Mater. Sci. Technol., 2019, vol. 35, pp. 1840–47.10.1080/02670836.2019.1651015 ↗
19. J. Miettinen, P. Docheva, and G. Vassilev: CALPHAD., 2010, vol. 34, pp. 415–20.10.1016/j.calphad.2010.07.008 ↗
20. C. Dai, H.H. Xu, S.Q. Wang, M. Yin, S.L. Cui, L.J. Zhang, Y. Du, and F. Zheng: CALPHAD., 2011, vol. 35, pp. 556–61.10.1016/j.calphad.2011.10.002 ↗
21. S. Glasstone, K.J. Laidler, and H. Eyring: The Theory of Rate Processes, McGraw-Hill, New York, 1941.
22. Q. Wu, G. Xu, H. Chang, L. Zhou, and Y. Cui: CALPHAD., 2020, vol. 71, p. 102203.10.1016/j.calphad.2020.102203 ↗
23. X.J. Liu, N. Shangguan, and C.P. Wang: CALPHAD., 2011, vol. 35, pp. 155–59.10.1016/j.calphad.2010.12.007 ↗
24. Y. Liu, L. Zhang, Y. Du, G. Sheng, J. Wang, and D. Liang: CALPHAD., 2011, vol. 35, pp. 376–83.10.1016/j.calphad.2011.04.006 ↗
25. W.F. Gale and T.C. Totemeier: Smithells Metals Reference Book, Butterworth Heinemann, Oxford, 2003.
26. S. Fu, X. Chen, and P. Liu: Mater. Sci. Eng. A., 2020, vol. 771, p. 138656.10.1016/j.msea.2019.138656 ↗
27. Z.L. Lin, Y.L. Li, M.H. Zhu, M.W. Li, Z.B. Yang, F.M. Wang, and Y.H. Sun: Nonferr. Met. Sci. Eng., 2015, vol. 006, pp. 37–41.