Effects of Cr on NiAl (β′) Precipitation in Ferritic Fe-Ni-Al Alloys
Source abstract
Abstract
NiAl (β′)-strengthened ferritic alloys are promising candidates for high-temperature applications. They present a coherent precipitate–matrix interface and are usually alloyed with 10 wt pct Cr to improve corrosion resistance and provide solid solution strengthening. In this work, the effects of Cr content on the precipitation of β′ in Fe-Ni-Al ferritic alloys are studied using dilatometric analysis during continuous heating and cooling. The dilatometric data are correlated with microstructural observations, X-ray diffraction, and thermodynamic calculations. Additionally, isothermally annealed diffusion couples are used for determining the β′ phase stability during isothermal conditions. Results indicate that an increase in Cr shifts the dissolution of β′ to higher temperatures and the Curie point to lower values. Furthermore, the coarsening rate of the β′ phase increases with the concentration of Cr. The addition of Cr implies a tradeoff between beneficial aspects like increased corrosion resistance and extended β′ stability range against the partial loss of coherency and a higher coarsening rate. The agreement between thermodynamic calculations and the experimental data provides a useful insight for further materials development.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · High-Temperature Coating Behaviors
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. Z. Sun, C.H. Liebscher, S. Huang, Z. Teng, G. Song, G. Wang, M. Asta, M. Rawlings, M.E. Fine, and P.K. Liaw: Scr. Mater., 2013, vol. 68, pp. 384–88.10.1016/j.scriptamat.2012.10.040 ↗
2. R. Viswanathan, K. Coleman, and U. Rao: Int. J. Press. Vessel. Pip., 2006, vol. 83, pp. 778–83.10.1016/j.ijpvp.2006.08.006 ↗
3. R. Viswanathan, J.F. Henry, J. Tanzosh, G. Stanko, J. Shingledecker, B. Vitalis, and R. Purgert: J. Mater. Eng. Perform., 2013, vol. 22, pp. 2904–15.10.1007/s11665-013-0717-6 ↗
4. C. Stallybrass, A. Schneider, and G. Sauthoff: Intermetallics, 2005, vol. 13, pp. 1263–68.10.1016/j.intermet.2004.07.048 ↗
5. N.Q. Vo, C.H. Liebscher, M.J.S. Rawlings, M. Asta, and D.C. Dunand: Acta Mater., 2014, vol. 71, pp. 89–99.10.1016/j.actamat.2014.02.020 ↗
6. Z. Guo and W. Sha: Mater. Trans., 2002, vol. 43, pp. 1273–82.10.2320/matertrans.43.1273 ↗
7. Z.K. Teng, C.T. Liu, G. Ghosh, P.K. Liaw, and M.E. Fine: Intermetallics, 2010, vol. 18, pp. 1437–43.10.1016/j.intermet.2010.03.026 ↗
8. M.E. Krug and D.C. Dunand: Acta Mater., 2011, vol. 59, pp. 5125–34.10.1016/j.actamat.2011.04.044 ↗
9. D.A. Grose and G.S. Ansell: Metall. Trans. A, 1981, vol. 12, pp. 1631–45.10.1007/BF02643569 ↗
10. Z.K. Teng, C.T. Liu, M.K. Miller, G. Ghosh, E.A. Kenik, S. Huang, and P.K. Liaw: Mater. Sci. Eng. A, 2012, vol. 541, pp. 22–7.10.1016/j.msea.2012.01.103 ↗
11. F.R.N. Nabarro and H.L. de Villiers: The Physics of Creep, 1st edn., Taylor and Francis, New York, 1995.
12. K. Cho, K. Ikeda, and H.Y. Yasuda: Mater. Sci. Eng. A, 2018, vol. 728, pp. 239–50.10.1016/j.msea.2018.05.034 ↗
13. S. Baik, M.J.S. Rawlings, and D.C. Dunand: Acta Mater., 2018, vol. 144, pp. 707–15.10.1016/j.actamat.2017.11.013 ↗
14. S. Baik, M.J.S. Rawlings, and D.C. Dunand: Acta Mater., 2018, vol. 153, pp. 126–35.10.1016/j.actamat.2018.04.044 ↗
15. G. Song, S.J. Hong, J.K. Lee, S.H. Song, S.H. Hong, K.B. Kim, and P.K. Liaw: Scr. Mater., 2019, vol. 161, pp. 18–22.10.1016/j.scriptamat.2018.10.004 ↗
16. G. Song, Z. Sun, L. Li, X. Xu, M. Rawlings, C.H. Liebscher, B. Clausen, J. Poplawsky, D.N. Leonard, S. Huang, Z. Teng, C.T. Liu, M.D. Asta, Y. Gao, D.C. Dunand, G. Ghosh, M. Chen, M.E. Fine, and P.K. Liaw: Sci. Rep., 2015, vol. 5, pp. 1–14.
17. C. Stallybrass and G. Sauthoff: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 985–90.10.1016/j.msea.2004.01.108 ↗
18. R. Viswanathan, J. Sarver, and J.M. Tanzosh: J. Mater. Eng. Perform., 2006, vol. 15, pp. 255–74.10.1361/105994906X108756 ↗
19. S.M. Hao, K. Ishida, and T. Nishizawa: Metall. Trans. A, 1985, vol. 16, pp. 179–85.10.1007/BF02816044 ↗
20. D.A. Porter, K.E. Easterling, and M.Y. Sherif: Phase Transformations in Metals and Alloys, 3rd ed., CRC Press, Boca Raton, 2008.
21. L. Sun, T.H. Simm, T.L. Martin, S. McAdam, D.R. Galvin, K.M. Perkins, P.A.J. Bagot, M.P. Moody, S.W. Ooi, P. Hill, M.J. Rawson, and H.K.D.H. Bhadeshia: Acta Mater., 2018, vol. 149, pp. 285–301.10.1016/j.actamat.2018.02.044 ↗
22. M. Hunkel, H. Surm, and M. Steinbacher: in Handbook of Thermal Analysis and Calorimetry, vol. 6, 2018, pp. 103–29.10.1016/B978-0-444-64062-8.00019-X ↗
23. T. Miyazaki, T. Koyama, and S. Kobayashi: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 945–49.10.1007/BF02649762 ↗
24. T. Miyazaki: Solid State Phenom., 2008, vol. 138, pp. 43–56.10.4028/www.scientific.net/SSP.138.43 ↗
25. T. Miyazaki: Prog. Mater. Sci., 2012, vol. 57, pp. 1010–60.10.1016/j.pmatsci.2011.11.002 ↗
26. A.A. Kodentsov, G.F. Bastin, and F.J.J. van Loo: Application of Diffusion Couples in Phase Diagram Determination, Elsevier Ltd, Amsterdam, 2007.10.1016/B978-008044629-5/50006-9 ↗
27. L. Kaufman and H. Nesor: Calphad, 1978, vol. 2, pp. 55–80.10.1016/0364-5916(78)90005-6 ↗
28. N. Saunders and P. Miodownik (1998) CALPHAD Calculation of Phase Diagrams: A Comprehensive Guide, vol. 1. Elsevier Science Ltd. Oxford
29. Thermo-Calc Software AB: TCNFE10 TCS Steel and Fe-alloys Database.
30. A.D. Sequeira, H.A. Calderon, G. Kostorz, and J.S. Pedersen: Acta Metall. Mater., 1995, vol. 43, pp. 3441–51.10.1016/0956-7151(95)00044-V ↗
31. D.J. Choi and W.D. Scott: J. Am. Ceram. Soc., 1987, vol. 70, pp. C-269-C–272.10.1111/j.1151-2916.1987.tb04897.x ↗
32. S. Cao and J.C. Zhao: Acta Mater., 2015, vol. 88, pp. 196–206.10.1016/j.actamat.2014.12.027 ↗
33. A. Verma, M. Sundararaman, J.B. Singh, and S.A. Nalawade: Meas. Sci. Technol. (2010). https://doi.org/10.1088/0957-0233/21/10/10510610.1088/0957-0233/21/10/105106 ↗
34. R. Rahimi, P. Pekker, H. Biermann, O. Volkova, B.C. De Cooman, and J. Mola: Mater. Des., 2016, vol. 111, pp. 640–45.10.1016/j.matdes.2016.09.033 ↗
35. R. Taillard, A. Pineau, and B.J. Thomas: Mater. Sci. Eng., 1982, vol. 54, pp. 209–19.10.1016/0025-5416(82)90115-X ↗
36. G.H. Bozzolo, R.D. Noebe, and C. Amador: Intermetallics, 2002, vol. 10, pp. 149–59.10.1016/S0966-9795(01)00124-8 ↗
37. ICDD: PDF-2 2003 (Database), International Centre for Diffraction Data, Newtown Square, PA, 2003.
38. H. Hu: Texture, 1974, vol. 1, pp. 233–58.10.1155/TSM.1.233 ↗
39. H. Okamoto: J. Phase Equilibria, 1993, vol. 14, pp. 257–59.10.1007/BF02667823 ↗
40. M.Y. Lavrentiev, K. Mergia, M. Gjoka, D. Nguyen-Manh, G. Apostolopoulos, and S.L. Dudarev: J. Phys. Condens. Matter.(2012). doi: 10.1088/0953-8984/24/32/32600110.1088/0953-8984/24/32/326001 ↗
41. F. Seitz: Acta Metall., 1953, vol. 1, pp. 355–69.10.1016/0001-6160(53)90112-6 ↗
42. N. Matan, H.M.A. Winand, P. Carter, M. Karunaratne, P.D. Bogdanoff, and R.C. Reed: Acta Mater., 1998, vol. 46, pp. 4587–600.10.1016/S1359-6454(98)00142-6 ↗
43. C.-G. Lee, Y. Iijima, T. Hiratani, and K. Hirano: Mater. Trans. JIM, 1990, vol. 31, pp. 255–61.10.2320/matertrans1989.31.255 ↗
44. S. Liu, J. Shen, X.H. Guo, L.L. Liu, and Y. Niu: Corros. Sci., 2018, vol. 135, pp. 67–77.10.1016/j.corsci.2018.02.024 ↗