journal article·2020-10

Microstructural Evolution and Mechanical Properties of Ultrafine-Grained Ferritic-Martensitic Steel During Thermal Aging

Shenghu Chen, Xiaojie Jin, Lijian Rong

Publisher page

Abstract

Microstructural evolution and mechanical properties of ultrafine-grained 9Cr2WVTa ferritic-martensitic steel via isothermal aging at 823 K to 923 K was studied. Fine dispersed carbides with a low coarsening rate could effectively impede migration of grain boundaries via the Zener pinning effect in the ultrafine-grained 9Cr2WVTa during thermal aging at 823 K, which is responsible for the good microstructural stability. Higher strength and higher ductility are present in the ultrafine-grained 9Cr2WVTa than those of tempered 9Cr2WVTa after thermal aging at 823 K up to 5000 hours. Laves phase precipitating adjacent to carbides at subgrain/grain boundaries grow into fine rod-like shape along grain boundaries in ultrafine-grained 9Cr2WVTa, while granular-like Laves phase is resulted in tempered 9Cr2WVTa. Newly formed nanometer-size Laves phase could provide precipitation strengthening to compensate loss of solid solution hardening, and relatively homogenous precipitation of Laves phase could considerably suppress microcrack formation in ultrafine-grained 9Cr2WVTa. However, abnormal grain growth is induced by the non-uniformity of pinning efficiency in the ultrafine-grained 9Cr2WVTa during thermal aging at 923 K. The abnormal grain growth leads to a significant reduction in the strengthening effect from subgrain hardening, which is more than three times larger than the Orowan stress from particle hardening, thus a dramatic decrease in the micro-hardness is resulted.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (62)

Show source-provided references
1. F. Abe, T.U. Kern and R. Viswanathan: Creep Resistant Steels, Woodhead Publishing, Cambridge, England, 2008, pp. 15-70.10.1533/9781845694012 ↗
2. R.L. Klueh and D.R. Harries: High-chromium Ferritic and Martensitic Steels for Nuclear Applications, American Society for Testing and Materials, West Conshohocken, PA, 2001, pp. 5-28.10.1520/MONO10017M ↗
3. Y. Guérin, S.J. Zinkle and G.S. Was: MRS Bull., 2009, vol. 34, pp. 10-19.
4. L. Tan, L.L. Snead and Y. Katoh: J. Nucl. Mater., 2016, vol. 478, pp. 42-49.10.1016/j.jnucmat.2016.05.037 ↗
5. Q. Huang, N. Baluc, Y. Dai, et. al: J. Nucl. Mater., 2013, vol. 442, pp. S2-S8.10.1016/j.jnucmat.2012.12.039 ↗
6. X. Zhou, C. Liu, Y. Liu and H. Li: J. Mater. Sci. Tech., 2015, vol. 31, pp. 235-42.10.1016/j.jmst.2014.12.001 ↗
7. J. Hald, Steel Res., 1996, vol. 67, pp. 369-74.10.1002/srin.199605503 ↗
8. G. Eggeler, J.C. Earthman, N. Nilsvang and B.Ilschner: Acta Mater., 1989, vol. 37, pp. 49-60.10.1016/0001-6160(89)90265-4 ↗
9. S. Chen and L. Rong: J. Nucl. Mater., 2015, vol. 459, pp. 13-19.10.1016/j.jnucmat.2015.01.004 ↗
10. R.L. Klueh and A.T. Nelson: J. Nucl. Mater., 2007, vol. 371, pp. 37-52.10.1016/j.jnucmat.2007.05.005 ↗
11. K. Maruyama, K. Sawada and J. Koike: ISIJ Int., 2001, vol. 41, pp. 641-53.10.2355/isijinternational.41.641 ↗
12. F. Abe: Sci. Technol. Adv. Mater., 2008, vol. 9, pp. 013002.10.1088/1468-6996/9/1/013002 ↗
13. H. Magnusson and R. Sandström: Metal. Mater. Trans. A, 2007, vol. 38A, pp. 2428-34.10.1007/s11661-007-9280-9 ↗
14. J. Pešička, R. Kužel, A. Dronhofer and G. Eggeler: Acta Mater., 2003, vol. 51, pp. 4847-62.10.1016/S1359-6454(03)00324-0 ↗
15. M. Li, L. Wang and J.D. Almer, Acta Mater., 2014, vol. 76, pp. 381-93.10.1016/j.actamat.2014.05.026 ↗
16. C.G. Panait, A. Zielińska-Lipiec, T.Koziel, A. Czyrska-Filemonowicz, A. Gourgues-Lorenzon and W. Bendick: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4062-69.10.1016/j.msea.2010.03.010 ↗
17. G. Eggeler: Acta Metall., 1989, vol. 37, pp. 3225-34.10.1016/0001-6160(89)90194-6 ↗
18. G. Eggeler, N. Nilsvang and B. Ilschne: Steel Res., 1987, vol. 58, pp. 97-103.10.1002/srin.198701594 ↗
19. Å. Gustafson and M. Hättestrand: Mater. Sci. Eng. A, 2002, vol. 333, pp. 279-86.10.1016/S0921-5093(01)01874-3 ↗
20. A.Fedoseeva, N.Dudova and R.Kaibyshev, Mater. Sci. Eng. A, 2016, vol. 654, pp. 1-12.10.1016/j.msea.2015.12.027 ↗
21. Q. Lu, W. Xu and S. Zwaag: Acta Mater., 2014, vol. 77, pp. 310-23.10.1016/j.actamat.2014.06.007 ↗
22. A. Kostka, K.-G.Tak, R.J. Hellmig, Y. Estrin and G. Eggeler: Acta Mater., 2007, vol. 55, pp. 539-50.10.1016/j.actamat.2006.08.046 ↗
23. J. Hald: Int J. Press. Vessels Pip., 2008, vol. 85, pp. 30-37.10.1016/j.ijpvp.2007.06.010 ↗
24. C.S. Smith: Trans. AIME, 1948, vol. 175, pp. 15–51.
25. V. Dudko, A. Belyakov, D. Molodov and R. Kaibyshev: Metal. Mater. Trans. A, 2013, vol. 44A, pp. 162-72.10.1007/s11661-011-0899-1 ↗
26. H. Ghassemi-Armaki, R.P. Chen, K. Maruyama and M. Igarashi: Metal. Mater. Trans. A, 2011, vol. 42A, pp. 3084-94.10.1007/s11661-011-0726-8 ↗
27. H. Ghassemi-Armaki, R.P. Chen, K. Maruyama, M. Yoshizawa, and M. Igarashi: Mater. Lett., 2009, vol. 63, pp. 2423-25.10.1016/j.matlet.2009.08.024 ↗
28. P.J. Ennis, A. Zielinska-Lipiec, O. Wachter and A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, pp. 4901-07.10.1016/S1359-6454(97)00176-6 ↗
29. F. Abe: Mater. Sci. Eng. A, 2004, vol. 387–389, pp. 565–69.10.1016/j.msea.2004.01.057 ↗
30. D. Rojas, J. Garcia, O. Prat, G. Sauthoff and A.R. Kaysser-Pyzalla: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5164–76.10.1016/j.msea.2011.03.037 ↗
31. Y. Xu, Y. Nie, M. Wang, W. Li and X. Jin: Acta Mater., 2017, vol. 131, pp. 110-122.10.1016/j.actamat.2017.03.045 ↗
32. G. Gupta and G.S. Was: Metall. Mater. Trans. A, 2008, vol. 39, pp. 150-164.10.1007/s11661-007-9411-3 ↗
33. M. Taneike, F. Abe and K. Sawada: Nature, 2003, vol. 424, pp. 294–296.10.1038/nature01740 ↗
34. L. Tan, T.S. Byun, Y. Katoh and L.L. Snead: Acta Mater., 2014, vol. 71, pp. 11–19.10.1016/j.actamat.2014.03.015 ↗
35. J.H. Zhou, Y.F. Shen, Y.Y. Hong, W.Y. Xue and R.D.K. Misra: Mater. Sci. Eng. A, 2020, vol. 769, pp. 138471.10.1016/j.msea.2019.138471 ↗
36. J. Vivas, C. Celada-Casero, D. San Martín, et. al: Metall. Mater. Trans. A, 2016, vol. 47, pp. 5344-51.10.1007/s11661-016-3596-2 ↗
37. R.L. Klueh, N. Hashimoto and P.J. Maziasz: J. Nucl. Mater., 2007, vol. 367–370, pp. 48–53.10.1016/j.jnucmat.2007.03.001 ↗
38. Z.X. Xia, C. Zhang, N.Q. Fan, Y.F. Zhao, F. Xue and S.J. Liu: Mater. Sci. Eng. A, 2012, vol. 545, pp. 91–96.10.1016/j.msea.2012.03.004 ↗
39. P. Shruti, T. Sakthivel, G.V.S. Nageswara Rao, K. Laha and T. Srinivasa Rao: Metall. Mater. Trans. A, 2019, vol. 50, pp. 4582-93.10.1007/s11661-019-05364-0 ↗
40. L. Tan, D.T. Hoelzer, J.T. Busby, M.A. Sokolov and R.L. Klueh: J. Nucl. Mater., 2012, vol. 422, pp. 45–50.10.1016/j.jnucmat.2011.12.011 ↗
41. S. Chen, X. Jin and L. Rong: Mater. Sci. Eng. A, 2015, vol. 631, pp. 139–43.10.1016/j.msea.2015.02.044 ↗
42. X. Jin, S. Chen and L. Rong: Mater. Sci. Eng. A, 2018, vol. 712, pp. 97–107.10.1016/j.msea.2017.11.095 ↗
43. M. Song, C. Sun, Y. Chen, Z. Shang, J. Li, Z. Fan, K.T. Hartwig and X. Zhang: Int. J. Pres. Ves. Pip., 2019, vol. 172, pp. 212-219.10.1016/j.ijpvp.2019.03.025 ↗
44. M. Song, R. Zhu, D.C. Foley, C. Sun, Y. Chen, K.T. Hartwig and X. Zhang, J. Mater. Sci., 2013, vol. 48, 7360–73.10.1007/s10853-013-7522-3 ↗
45. Z.X. Xia, C. Zhang, X.F. Huang, W.B. Liu and Z.G. Yang: Sci. Rep., 2012, vol. 5, pp. 13027.10.1038/srep13027 ↗
46. S. Chen, X. Jin and L. Rong: Oxid. Met., 2016, vol. 85, pp. 189–203.10.1007/s11085-015-9596-6 ↗
47. S. Chen and L. Rong: Oxid. Met., 2018, vol. 89, pp. 415–428.10.1007/s11085-017-9796-3 ↗
48. M. Song, Y.D. Wu, D. Chen, X.M. Wang, C. Sun, K.Y. Yu, Y. Chen, L. Shao, Y. Yang, K.T. Hartwig and X. Zhang: Acta Mater., 2014, vol. 74, pp. 285–95.10.1016/j.actamat.2014.04.034 ↗
49. A.J. Schwarz, M. Kumar and B.L. Adams: Electron backscatter diffraction in materials science, Kluwer Acad/Plenum Publishers, New York, 2000, pp. 201-14.10.1007/978-1-4757-3205-4 ↗
50. L. Korcakova, J. Hald and M.A.J. Somers: Mater. Charact., 2001, vol. 47, pp. 111-17.10.1016/S1044-5803(01)00159-0 ↗
51. I. Kaur, Y. Mishin and W. Gust: Fundamentals of Grain and Interphase Boundary Diffusion, Wiley & Sons, Chichester, 1995, pp. 217-43.
52. J. Lian, R.Z. Valiev and B. Baudelet: Acta Metall. Mater., 1995, vol. 43, pp. 4165-70.10.1016/0956-7151(95)00087-C ↗
53. F.J. Humphreys and M. Hatherly: Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, 1995, pp. 145-97.
54. M.R. Akbarpour, M. Farvizi and H.S. Kim: Mater. Des., 2017, vol. 119, pp. 311–18.10.1016/j.matdes.2017.01.077 ↗
55. J.D. Robsona, D.T. Henry and B. Davis: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4239–47.10.1016/j.msea.2011.02.030 ↗
56. J.M. Cabrefa, A. Alomar and J.M. Prado: J. Mater. Sci., 1996, vol. 31, pp. 1303-09.10.1007/BF00353110 ↗
57. M.I. Isik, A. Kostka, V.A. Yardley, K.G. Pradeep, M.J. Duarte, P.P. Choi, D. Raabe and G. Eggeler: Acta Mater., 2015, vol. 90, pp. 94-104.10.1016/j.actamat.2015.01.027 ↗
58. S. Takemoto, H. Nitta, Y. Iijima and Y. Yamazaki: Phil. Mag., 2007, vol. 87 pp. 1619-29.10.1080/14786430600732093 ↗
59. J.C. Fisher: J. Appl. Phys., 1951, vol. 22, pp. 74-77.10.1063/1.1699825 ↗
60. F. Abe: Mater. Sci. Eng. A, 2001, vol. 319-321, pp. 770–773.10.1016/S0921-5093(00)02002-5 ↗
61. Q. Li: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 89-97.10.1007/s11661-006-0155-2 ↗
62. F. Abe: Metall. Mater. Trans. A, 2005, vol. 36, pp. 321-32.10.1007/s11661-005-0305-y ↗