On the Growth Dynamics of Nearly-Locked Grain in the Three-Phase In-Bi-Sn Eutectic System
Source abstract
Abstract
Solidification microstructures are significantly affected by the anisotropy of crystal/crystal interphase energy. A recent experimental work on a three-phase eutectic system by the authors suggested that two distinguishable eutectic grains, i.e., quasi-isotropic and locked, form when crystal/crystal interphase energies contain negligible and strong anisotropy, respectively (Mohagheghi and Serefoglu in Acta Mater 2018, vol. 151, pp. 432–42, 2018). In two-phase eutectic systems, in addition to these two grain types, another class of eutectic grain called nearly-locked (NL) was reported. In order to investigate the existence of the NL grain in three-phase eutectic systems, real-time directional solidification (DS) and rotating directional solidification (RDS) experiments are performed on thin samples of In-Bi-Sn eutectic alloy. It is found that NL grains also form in three-phase eutectics and they contain some characteristic features of both quasi-isotropic and locked grains. The anisotropy is strong enough to tilt the lamellar pattern with respect to the thermal gradient axis, as in the case of locked grains; however, the NL grains also retain some of the characteristic features of the quasi-isotropic grains, such as λ-diffusion, systematic eutectic spacing adjustment, and recovery mechanisms. As a result, these grains tend to form a relatively uniform ABAC-type growth pattern, similar to quasi-isotropic grains. Using the equilibrium shapes extracted from the interphase traces of RDS patterns, the γ plot of the anisotropic interphase, which contains 2 twofold smooth and distinct minima, is determined.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Material Dynamics and Properties · Metallic Glasses and Amorphous Alloys
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (25)
Show source-provided references
1. K.A. Jackson and J.D. Hunt: Trans. TMS-AIME, 1966, vol. 236, pp. 1129–42.
2. Akamatsu, M. Plapp, G. Faivre, and A. Karma: Phys. Rev. E, 2002, vol. 66, p. 030501.10.1103/PhysRevE.66.030501 ↗
3. S. Akamatsu, M. Plapp, G. Faivre, and A. Karma: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1815–28.10.1007/s11661-004-0090-z ↗
4. M. Ginibre, S. Akamatsu, and G. Faivre: Phys. Rev. E, 1997, vol. 56, pp. 780–96.10.1103/PhysRevE.56.780 ↗
5. A. Karma and A. Sarkissian: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 635–56.10.1007/BF02648952 ↗
6. S. Akamatsu, S. Bottin-Rousseau, M. Perrut, G. Faivre, V.T. Witusiewicz, and L. Sturz: J. Cryst. Growth, 2007, vol. 299, pp. 418–28.10.1016/j.jcrysgro.2006.11.271 ↗
7. A. Parisi and M. Plapp: Acta Mater., 2008, vol. 56, pp. 1348–57.10.1016/j.actamat.2007.11.037 ↗
8. B. Caroli, C. Caroli, G. Faivre, and J. Mergy: J. Cryst. Growth, 1992, vol. 118, pp. 135–50.10.1016/0022-0248(92)90058-Q ↗
9. S. Akamatsu, S. Bottin-Rousseau, M. Serefoglu, and G. Faivre: Acta Mater., 2012, vol. 60, pp. 3199–3205.10.1016/j.actamat.2012.02.031 ↗
10. S. Akamatsu, S. Bottin-Rousseau, M. Şerefoğlu, and G. Faivre: Acta Mater., 2012, vol. 60, pp. 3206–14.10.1016/j.actamat.2012.02.033 ↗
11. S. Bottin-Rousseau, M. Şerefoğlu, S. Akamatsu, and G. Faivre: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 27, p. 012088.10.1088/1757-899X/27/1/012088 ↗
12. S. Akamatsu, S. Bottin-Rousseau, G. Faivre, S. Ghosh, and M. Plapp: IOP Conf. Ser.: Mater. Sci. Eng., 2015, vol. 84, p. 012083.10.1088/1757-899X/84/1/012083 ↗
13. S. Akamatsu and M. Plapp: Curr. Opin. Solid State Mater. Sci., 2016, vol. 20, pp. 46–54.10.1016/j.cossms.2015.10.002 ↗
14. S. Ghosh, A. Choudhury, M. Plapp, S. Bottin-Rousseau, G. Faivre, and S. Akamatsu: Phys. Rev. E, 2015, vol. 91, p. 022407.10.1103/PhysRevE.91.022407 ↗
15. S. Mohagheghi and M. Şerefoğlu: Acta Mater., 2018, vol. 151, pp. 432–42.10.1016/j.actamat.2018.03.019 ↗
16. S. Bottin-Rousseau, O. Senninger, G. Faivre, and S. Akamatsu: Acta Mater., 2018, vol. 150, pp. 16–24.10.1016/j.actamat.2018.02.049 ↗
17. J.D. Holder and B.F. Oliver: Metall. Trans., 1974, vol. 5, pp. 2423–37.10.1007/BF02644026 ↗
18. L. Sturz, V.T. Witusiewicz, U. Hecht, and S. Rex: J. Cryst. Growth, 2004, vol. 270, pp. 273–82.10.1016/j.jcrysgro.2004.06.004 ↗
19. S. Rex, B. Bottger, V. Witusiewicz, and U. Hecht: Mater. Sci. Eng. A, 2005, vol. 413, pp. 249–54.10.1016/j.msea.2005.09.019 ↗
20. V.T. Witusiewicz, U. Hecht, S. Rex, and M. Apel: Acta Mater., 2005, vol. 53, pp. 3663–69.10.1016/j.actamat.2005.04.015 ↗
21. . S. Bottin-Rousseau, M. Şerefoğlu, S. Yücetürk, G. Faivre, and S. Akamatsu: Acta Mater., 2016, vol. 109, pp. 259–66.10.1016/j.actamat.2016.01.065 ↗
22. S. Mohagheghi and M. Şerefoğlu: J. Cryst. Growth, 2017, vol. 470, pp. 66–74.10.1016/j.jcrysgro.2017.04.008 ↗
23. S. Mohagheghi, U. Hecht, S. Bottin-Rousseau, S. Akamatsu, G. Faivre, and M. Şerefoğlu: IOP Conf. Ser.: Mater. Sci. Eng., 2019, vol. 529, p. 012010.10.1088/1757-899X/529/1/012010 ↗
24. V.T. Witusiewicz, U. Hecht, B. Bottger, and S. Rex: J. Alloys Compds., 2007, vol. 428, pp. 115–24.10.1016/j.jallcom.2006.03.050 ↗
25. S. Mohagheghi: Ph.D. Thesis, Koc University, Istanbul, 2018.