Quantifying Void Formation and Changes to Microstructure During Hydrogen Charging: A Precursor to Embrittlement and Blistering
Source abstract
Abstract
Hydrogen diffusion into the microstructure is a key first step for both hydrogen embrittlement and hydrogen blistering. Previous research has suggested that an increase in voids pre-loading can significantly affect the void growth and failure of samples during loading. However, there is a lack of knowledge on the effect of hydrogen alone on initial void fraction. Therefore, the microstructures of six samples of 13 pct chromium stainless steel were imaged using a computed tomography technique before and after hydrogen charging. These images were then formed into a 3D model to quantify the total void volume fraction before and after charging. Overall, charging was shown to increase void fraction by 18 times. This work provides support to the theory that an important role of hydrogen in promoting failure is to increase void production through recombination into H2.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Corrosion Behavior and Inhibition · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. 1. M. R. Louthan, Journal of Failure Analysis and Prevention 2008, vol. 8, pp. 289-307.10.1007/s11668-008-9133-x ↗
2. 2. X. C. Ren, Q. J. Zhou, G. B. Shan, W. Y. Chu, J. X. Li, Y. J. Su and L. J. Qiao, Metallurgical and Materials Transactions A 2008, vol. 39, pp. 87-97.10.1007/s11661-007-9391-3 ↗
3. 3. I. M. Robertson, P. Sofronis, A. Nagao, M. L. Martin, S. Wang, D. W. Gross and K. E. Nygren, Metallurgical and Materials Transactions B 2015, vol. 46, pp. 1085-1103.10.1007/s11663-015-0325-y ↗
4. 4. R. A. Oriani and P. H. Josephic, Acta Metallurgica 1974, vol. 22, pp. 1065-1074.10.1016/0001-6160(74)90061-3 ↗
5. 5. H. K. Birnbaum and P. Sofronis, Materials Science and Engineering: A 1994, vol. 176, pp. 191-202.10.1016/0921-5093(94)90975-X ↗
6. 6. M. Nagumo, Materials Science and Technology 2004, vol. 20, pp. 940-950.10.1179/026708304225019687 ↗
7. 7. X. Gao, T. Wang and J. Kim, International Journal of Solids and Structures 2005, vol. 42, pp. 5097-5117.10.1016/j.ijsolstr.2005.02.028 ↗
8. P. Iassonov, T. Gebrenegus and M. Tuller, Water Resources Research 2009, vol. 45.10.1029/2009WR008087 ↗
9. 9. B. Leszczyński, A. Gancarczyk, A. Wróbel, M. Piątek, J. Łojewska, A. Kołodziej and R. Pędrys, Journal of Nondestructive Evaluation 2016, vol. 35, p. 35.10.1007/s10921-016-0352-x ↗
10. C. Reinhart: 17th World Conf. Nondestr. Test., Citeseer, 2008, pp. 25–28.
11. N. Otsu, IEEE transactions on systems, man, and cybernetics 1979, vol. 9, pp. 62-66.10.1109/TSMC.1979.4310076 ↗
12. S. Laustsen, D.P. Bentz, M.T. Hasholt, and O.M. Jensen: Int. RILEM Conf. Use Superabsorbent Polym. Other N. Addit. Concr., RILEM Publications SARL, 2010, pp. 153–62.
13. 13. B. Otsuki, M. Takemoto, S. Fujibayashi, M. Neo, T. Kokubo and T. Nakamura, Biomaterials 2006, vol. 27, pp. 5892-5900.10.1016/j.biomaterials.2006.08.013 ↗
14. 14. I. Jerjen, L. D. Poulikakos, M. Plamondon, P. Schuetz, T. Luethi and A. Flisch, Physics Procedia 2015, vol. 69, pp. 451-456.10.1016/j.phpro.2015.07.063 ↗
15. 15. D. Seo, H. Toda, M. Kobayashi, K. Uesugi, A. Takeuchi and Y. Suzuki, ISIJ International 2015, vol. 55, pp. 1474-1482.10.2355/isijinternational.55.1474 ↗
16. 16. Y. Kim, Y. Kim, D. Kim, S. Kim, W. Nam and H. Choe, MATERIALS TRANSACTIONS 2011, vol. 52, pp. 507-513.10.2320/matertrans.M2010273 ↗
17. 17. R. A. Siddiqui and H. A. Abdullah, Journal of Materials Processing Technology 2005, vol. 170, pp. 430-435.10.1016/j.jmatprotec.2005.05.024 ↗
18. 18. A. L. Gurson, Journal of Engineering Materials and Technology 1977, vol. 99, pp. 2-15.10.1115/1.3443401 ↗
19. 19. M. Springmann and M. Kuna, Computational Materials Science 2005, vol. 32, pp. 544-552.10.1016/j.commatsci.2004.09.010 ↗
20. 20. M. Azuma, S. Goutianos, N. Hansen, G. Winther and X. Huang, Materials Science and Technology 2012, vol. 28, pp. 1092-1100.10.1179/1743284712Y.0000000006 ↗
21. 21. N. Chawla and X. Deng, Materials Science and Engineering: A 2005, vol. 390, pp. 98-112.10.1016/j.msea.2004.08.046 ↗
22. L. S. Morrissey and S. Nakhla: A Finite Element Model to Predict the Effect of Porosity on Elastic Modulus in Low-Porosity Materials. (2018).10.1007/s11661-018-4623-2 ↗
23. 23. R. A. Hardin and C. Beckermann, Metallurgical and Materials Transactions A 2007, vol. 38, pp. 2992-3006.10.1007/s11661-007-9390-4 ↗
24. P.G. Kossakowski and W. Wciślik: IOP Conference Series: Materials Science and Engineering, IOP Publishing, 2017, p. 022050.10.1088/1757-899X/245/2/022050 ↗
25. 25. W. Wcislik, Procedia Structural Integrity 2016, vol. 2, pp. 1676-1683.10.1016/j.prostr.2016.06.212 ↗
26. 26. V. Uthaisangsuk, U. Prahl, S. Münstermann and W. Bleck, Computational Materials Science 2008, vol. 43, pp. 43-50.10.1016/j.commatsci.2007.07.036 ↗