journal article·2018-11Open access

Optimization of Crystallographic Texture for Sheet-forming Applications Using Taylor-based Models

Jesús Galán-López, Leo A. I. Kestens

Abstract

Abstract Plastic deformation of metallic materials is an inherently anisotropic process as a result of the presence of preferential orientations in their crystallographic texture. Crystal plasticity modeling, which allows simulating the response of polycrystal aggregates taking into account their texture and other microstructural parameters, has been extensively used to predict this behavior. In this work, crystal plasticity models are used to deal with the opposite problem: given a desired behavior, determine how to modify a texture to approximate this behavior in the most efficient way. This goal can be expressed as an optimization problem, in which the objective is to find the texture with the best formability properties among all the possible ones. An incremental optimization method, based on the gradient descent algorithm, has been developed and applied to different initial textures corresponding to typical steel and aluminum sheet products. According to expectations, the textures found present a stronger $$\gamma $$ fiber component. Moreover, the method sets the basis for the development of more complicated optimization schemes directed toward optimizing specific materials and forming processes.
Source: crossref · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Metal Forming Simulation Techniques · Metallurgy and Material Forming · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Mellor, P. Int. Met. Rev. 1981, 26(1), 1–2010.1179/imr.1981.26.1.1 ↗
2. Wilson, D. Int. Mater. Rev. 1990, 35(1), 329–34810.1179/095066090790323948 ↗
3. Roters, F., Eisenlohr, P., Hantcherli, L., Tjahjanto, D.D., Bieler, T.R., Raabe, D. Acta Mater. 2010, 58(4), 1152–121110.1016/j.actamat.2009.10.058 ↗
4. W.F. Hosford and R.M. Caddell: Metal Forming: Mechanics and Metallurgy. Cambridge University Press, Cambridge, 201110.1017/CBO9780511976940 ↗
5. Lankford, W., Snyder, S., Bauscher, J. Trans. ASM 1950, 42, 1197–1232
6. Bunge, H. Krist. Tech. 1970, 5(1), 145–17510.1002/crat.19700050112 ↗
7. Bae, J.W., Um, H.Y., Lee, S.H., Min, B.J., Kim, S.Y., Chung, J.S., Park, K.S., Seo, M.H., Kim, H.S. Metall. Mater. Trans. A 2017, 48(3), 1021–103210.1007/s11661-017-3956-6 ↗
8. Chamanfar, A., Mahmudi, R. Metall. Mater. Trans. A 2006, 37(12), 3477–348710.1007/s11661-006-1043-5 ↗
9. Schouwenaars, R., Houtte, P.V., Aernoudt, E., Standaert, C., Dilewijns, J. ISIJ int. 1994, 34(4), 366–37210.2355/isijinternational.34.366 ↗
10. Dawson, P., MacEwen, S., Wu, P. Int. Mater. Rev. 2003, 48(2), 86–12210.1179/095066003225002415 ↗
11. Sachs, G. Trans. Faraday Soc. 1928, 24, 84–9210.1039/tf9282400084 ↗
12. Taylor, G. J. Inst. Met. 1938, 62, 307–324
13. Van Houtte, P. Texture, Stress, Microstruct. 1987, 7(1), 29–7210.1155/TSM.7.29 ↗
14. Hosford, W.F.J. Mater. Sci. Eng. A 1998, 257(1), 1–810.1016/S0921-5093(98)00819-3 ↗
15. Lequeu, P., Jonas, J. Metall. Trans. A 1988, 19(1), 105–12010.1007/BF02669819 ↗
16. Liu, Y., Kang, S., Ko, H. Scr. Mater. 1997, 37(4), 411–41710.1016/S1359-6462(97)00102-4 ↗
17. Van Houtte, P. Texture, Stress, Microstruct. 1988, 8, 313–35010.1155/TSM.8-9.313 ↗
18. Daniel, D., Jonas, J. Metall. Trans. A 1990, 21(1), 331–34310.1007/BF02782413 ↗
19. Savoie, J., Jones, J., MacEwen, S., Perrin, R. Textures Microstruct. 1995, 23, 149–14910.1155/TSM.23.149 ↗
20. Wronski, S., Bacroix, B. Mater. Charact. 2016, 118, 235–24310.1016/j.matchar.2016.05.028 ↗
21. Park, J.J. J. Mater. Process. Technol. 1999, 87(1), 146–15310.1016/S0924-0136(98)00338-0 ↗
22. Sidor, J., Miroux, A., Petrov, R., Kestens, L. Acta Mater. 2008, 56(11), 2495–250710.1016/j.actamat.2008.01.042 ↗
23. An, Y., Boterman, R., Atzema, E., Abspoel, M., Scholting, M. Metall. Mater. Trans. A 2016, 47(7), 3435–344610.1007/s11661-016-3504-9 ↗
24. Wu, P., MacEwen, S., Lloyd, D., Jain, M., Tugcu, P., Neale, K. Int. J. Plast. 2005, 21(4), 723–73910.1016/j.ijplas.2004.05.007 ↗
25. Yoshinaga, N., Sugiura, N., Hiwatashi, S., Ushioda, K., Kada, O. ISIJ int. 2008, 48(5), 667–67010.2355/isijinternational.48.667 ↗
26. Delannay, L., Barnett, M.R. Int. J. Plast. 2012, 32, 70–8410.1016/j.ijplas.2011.12.002 ↗
27. Rees, D. Applied Mathematical Modelling 1997, 21(9), 579–59010.1016/S0307-904X(97)00079-6 ↗
28. Huang, M., Man, C.S. Int. J. Plast. 2013, 41, 97–12310.1016/j.ijplas.2012.09.007 ↗
29. Ha, J., Lee, J., Kim, J.H., Lee, M.G., Barlat, F. Int. J. Plast. 2017, 93, 89–11110.1016/j.ijplas.2017.02.005 ↗
30. Lee, J., Ha, J., Bong, H.J., Kim, D., Lee, M.G. J. Mater. Sci. Eng. A 2016, 672, 65–7710.1016/j.msea.2016.06.074 ↗
31. Q. Xie, Y. Wang, A. Van Bael: Effect of the grain shape on the q-value evolution of steel sheets. In: IOP Conference Series: Materials Science and Engineering, vol. 82, p. 012096. IOP Publishing 201510.1088/1757-899X/82/1/012096 ↗
32. Gawad, J., Banabic, D., Van Bael, A., Comsa, D.S., Gologanu, M., Eyckens, P., Van Houtte, P., Roose, D. Int. J. Plast. 2015, 75, 141–16910.1016/j.ijplas.2015.02.011 ↗
33. Gawad, J., Van Bael, A., Eyckens, P., Samaey, G., Van Houtte, P., Roose, D. Comput. Mater. Sci. 2013, 66, 65–8310.1016/j.commatsci.2012.05.056 ↗
34. Delannay, L., Kalidindi, S., Van Houtte, P. J. Mater. Sci. Eng. A 2002, 336(1), 233–24410.1016/S0921-5093(01)01966-9 ↗
35. Kraska, M., Doig, M., Tikhomirov, D., Raabe, D., Roters, F. Comput. Mater. Sci. 2009, 46(2), 383–39210.1016/j.commatsci.2009.03.025 ↗
36. Liu, B., Raabe, D., Roters, F., Eisenlohr, P., Lebensohn, R. Modell. Simul. Mater. Sci. Eng. 2010, 18(8), 08500510.1088/0965-0393/18/8/085005 ↗
37. O’Brien, J., Hosford, W., Logan, R. Metall. Mater. Trans. A 1997, 28(10), 2085–208810.1007/s11661-997-0165-8 ↗
38. Delannay, L., Van Houtte, P., Van Bael, A., Vanderschueren, D. Modelling and Simulation in Materials Science and Engineering 2000, 8(4), 41310.1088/0965-0393/8/4/301 ↗
39. B.L. Adams, A. Henrie, B. Henrie, M. Lyon, S. Kalidindi, H. Garmestani: J. Mech. Phys. Solids 2001, vol. 49(8), pp. 1639–6310.1016/S0022-5096(01)00016-3 ↗
40. Fullwood, D.T., Niezgoda, S.R., Adams, B.L., Kalidindi, S.R. Prog. Mater. Sci. 2010, 55(6), 477–56210.1016/j.pmatsci.2009.08.002 ↗
41. Liu, R., Kumar, A., Chen, Z., Agrawal, A., Sundararaghavan, V., Choudhary, A. Sci. Rep. 2015, 5, 1155110.1038/srep11551 ↗
42. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods. Elsevier, New York, 201310.1016/B978-0-408-10642-9.50019-2 ↗
43. Van Houtte, P. Texture, Stress, Microstruct. 1991, 13, 199–21210.1155/TSM.13.199 ↗
44. Van Houtte, P. Texture, Stress, Microstruct. 1983, 6(1), 1–1910.1155/TSM.6.1 ↗
45. Van Houtte, P.: The MTM-FHM software system Version 2. Users Manual. KU Leuven 1995
46. Khachaturyan, A., Semenovskaya, S., Vainstein, B. Sov. Phys. Crystallogr 1979, 24, 519–524
47. Robbins, H., Monro, S. Ann. Math. Stat. 1951, pp. 400–40710.1214/aoms/1177729586 ↗
48. Anderson, E., Bai, Z., Bischof, C., Blackford, S., Demmel, J., Dongarra, J., Du Croz, J., Greenbaum, A., Hammarling, S., McKenney, A., Sorensen, D.: LAPACK Users’ Guide, third edn. Society for Industrial and Applied Mathematics, Philadelphia, PA 199910.1137/1.9780898719604 ↗
49. Sevillano, J.G., Van Houtte, P., Aernoudt, E. Prog. Mater. Sci. 1980, 25(2-4), 69–13410.1016/0079-6425(80)90001-8 ↗
50. Renouard, M., Wintenberger, M. CR Acad. Sci. Paris B 1981, 292, 385–388
51. Van Houtte, P. Mater. Sci. Eng. 1982, 55(1), 69–7710.1016/0025-5416(82)90085-4 ↗
52. Van Houtte, P., Li, S., Seefeldt, M., Delannay, L. Int. J. Plast. 2005, 21(3), 589–62410.1016/j.ijplas.2004.04.011 ↗
53. Lebensohn, R.A., Tomé, C. Acta Metall. Mater. 1993, 41(9), 2611–262410.1016/0956-7151(93)90130-K ↗