Microstructure Evolution in Cu-Pd-Ag Alloy Wires During Heat Treatment
Source abstract
Abstract
Cu-Pd-Ag alloy wires with a relatively low Ag content are used widely in electronics. This alloy is usually subjected to age hardening to increase its strength. However, the alloy microstructure that results when the alloy is processed as a wire has not been clarified sufficiently to elucidate the hardening mechanism. A clarification of the microstructure is critical to control the mechanical properties of the alloy wire. In this study, we investigated the detailed microstructure variation of the alloy wire after heat treatment. Microscopy showed that the alloy wire contained many parallel rods with an Ag-rich α phase that extended along the axial direction of a Cu-rich α-phase matrix before heat treatment. After heat treatment at 623 K for 1 hour, the morphology of the rods in the matrix remained mostly unchanged. Detailed observations revealed that the matrix was transformed to a nanolamellar structure with β and α2 phases. Many β′ phases with a thickness of a few atomic layers precipitated in the rods. Both nanostructures investigated in this study were expected to contribute to wire hardening through a short-fiber strengthening mechanism.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Metallic Glasses and Amorphous Alloys · Magnetic properties of thin films
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. A. Yu. Volkov, Platinum Metals Rev. 2004, vol. 48, pp. 3-12.10.1595/003214004X481312 ↗
2. T. Akahori, M. Niinomi, M. Nakai, W. Kawagishi and H. Fukui, J. Japan Inst. Metals 2008, vol. 72, pp. 63-71.10.2320/jinstmet.72.63 ↗
3. J.-I. Kawashima, K. Nakamura and S.-I. Goto, The Japanese Society for Dental Materials and Devaices 1984, vol. 3, pp. 431-447.
4. H. Fukui, S. Shinoda, M. Mukai, K. Yasue and J. Hasegawa, Shika Zairyo Kikai 1992, vol. 11, pp. 141-148.
5. K. Hattori, Y. Hata and S.-I. Goto, J. Jpn. Prosthodont Soc 1996, vol. 40, pp. 980-992.10.2186/jjps.40.980 ↗
6. S. Tanaka and Y. Kanzawa, J. Japan Inst. Metals 1980, vol. 44, pp. 973-979.10.2320/jinstmet1952.44.9_973 ↗
7. S. Tanaka, J.Japan Inst. Metals 1981, vol. 45, pp. 221-227.10.2320/jinstmet1952.45.3_221 ↗
8. H.-J. Seol, G.-C. Kim, K.-H. Son, Y.-H. Kwon and H.-II Kim: Journal of Alloys and Compounds 2005, vol. 387, pp. 139-146.10.1016/j.jallcom.2004.06.035 ↗
9. H.-J. Seol, D.-H. Lee, H.-K. Lee, Y. Takada, O. Okuno, Y.-H. Kwon and H.-I.I. Kim: Journal of Alloys and Compounds 2006, vol. 407, pp. 182-187.10.1016/j.jallcom.2005.06.051 ↗
10. C.-H. Yu, M.-G. Park, Y.-H. Kwon, H.-J. Seol and H.-I.I. Kim: Journal of Alloys and Compounds 2008, vol. 460, pp. 331-336.10.1016/j.jallcom.2007.06.057 ↗
11. D.-J. Noh, D.-H. Lee, M.-H. Cho, H.-I. Kim, Y.-H. Kwon and H.-J. Seol, Materials Science and Technology 2010, vol. 26, pp. 203-209.10.1179/174328409X448475 ↗
12. M. Ohta, T. Shiraishi, K. Hisatsune and M. Yamane, Journal of Dental Research 1980, vol. 59, pp. 1966-1971.10.1177/00220345800590110701 ↗
13. M.Ohta, K.Hisatsune and M.Yamane, Journal of the Less Common Metals 1979, vol. 65, pp. 11-21.10.1016/0022-5088(79)90163-2 ↗
14. S. Takahashi, M. Niinomi, H. Fukui, K.-I. Fukunaga, K. Narita and J. Hasegawa, The Japanese Society for Dental Materials and Devices 1998, vol. 17, pp. 370-377.
15. S. Takahashi, M. Niinomi, H. Fukui, K-I Fukunaga, T. Tsutsui, J. Hasegawa and K. Narita, The Japanese Society for Dental Materials and Devices 1998, vol. 17, pp. 294-303.10.4012/dmj.17.294 ↗
16. S. Takahashi, M. Niinomi, H. Fukui, T. Tsutsui, J. Hasegawa, L. Wang and K. Narita, The Japanese Society for Dental Materials and Devices 1998, vol. 17, pp. 191-199.
17. S. Takahashi, M. Niinomi, H. Fukui, T. Mizumoto and J. Hasegawa, The Japanese Society for Dental Materials and Devices 2000, vol. 19, pp. 162-169.
18. T. Sugimura, H. Fukui, M. Niinomi, T. Akahori, M. Nakai, J. Hieda and Y. Kim, The Japanese Society for Dental Materials and Devices 2012, vol. 31, pp. 531-537.
19. T. Mizumoto, M. Niinomi, Y. Nakano, T. Akahori and H. Fukui, Materials Transactions 2002, vol. 43, pp. 3160-3166.10.2320/matertrans.43.3160 ↗
20. K. Hisatsune, Y. Tanaka, K. Udoh and K. Yasuda, Journal of Materials Science: Materials in Medicine 1997, vol. 8, pp. 277-282.
21. H.-I. Kim, M.-I. Jang and M.-S. Kim, J Oral Rehabil 1999, vol. 26, pp. 215-22.10.1046/j.1365-2842.1999.00371.x ↗
22. H.-L. Kim, H.-K. Ahn, H.-K. Lee, K. Hisatsune, H.-J. Seol, and Y. Takuma, Dent. Mater. J. 1999, vol. 18, pp. 314–23.10.4012/dmj.18.314 ↗
23. H.-I. Kim, Y.-K. Kim, M.-I. Jang, K. Hisatsune and A. A. E. S. Sakrana, Biomaterials 2001, vol. 22, pp. 1433-1438.10.1016/S0142-9612(00)00301-X ↗
24. H. Herq, R. Jqrgensen, E. Sqrbrqden and E. Suoninen, J Dent Res 1982, vol. 61, pp. 673-677.10.1177/00220345820610051001 ↗
25. Y. Tanaka and Y. Ikeshita, Journal of the Japan Institute of Metals 2015, vol. 79, pp. 265-272.10.2320/jinstmet.J2014053 ↗
26. Y. Kim, M. Niinomi, J. Hieda, M. Nakai, K. Cho and H. Fukui, J Mech Behav Biomed Mater 2014, vol. 35, pp. 123-31.10.1016/j.jmbbm.2014.03.006 ↗
27. Y. Kim, M. Niinomi, J. Hieda, M. Nakai, K. Cho and H. Fukui, Mater Sci Eng C Mater Biol Appl 2014, vol. 37, pp. 204-9.10.1016/j.msec.2013.12.031 ↗
28. Y. Kim, M. Niinomi, M. Nakai, T. Akahori, T. Kanno and H. Fukui, Journal of Alloys and Compounds 2012, vol. 519, pp. 15-24.10.1016/j.jallcom.2011.10.099 ↗
29. Y. Kim, M. Niinomi, J. Hieda, M. Nakai and H. Fukui, Materials Science and Engineering: C 2012, vol. 32, pp. 503-509.10.1016/j.msec.2011.12.001 ↗
30. T. Akahori;, M. Niinomi;, M. Nakai;, H. Tsutsumi;, T. Kanno;, Y.-H. Kim; and H. Fukui, J. Japan Inst. Metals 2010, vol. 74, pp. 337-344.10.2320/jinstmet.74.337 ↗
31. Y. Tanaka, E. Miura, T. Shiraishi and K. Hisatsune, Materia 2004, vol. 43, p. 1036.
32. Y. Kim, M. Niinomi, J. Hieda, M. Nakai, K. Cho and H. Fukui, Mater Sci Eng C Mater Biol Appl 2014, vol. 36, pp. 329-35.10.1016/j.msec.2013.12.020 ↗
33. T. Kifune, K. Nakamura and S-I. Goto, The Japanese Society for Dental Materials and Devaices 1987, vol. 6, pp. 768-787.
34. A. Hirooka, K. Nakamura and S.-I. Goto, The Japanese Society for Dental Materials and Devaices 1989, vol. 8, pp. 36-59.
35. T. Hasegawa, Y. Miyagawa and K. Nakamura, The Japanese Society for Dental Materials and Devaices 1989, vol. 8, pp. 60-76.
36. H. Okamoto and K. Cenzual: in ASM Alloy Phase Diagrams Database, P. Villars, ed., ASM International, Materials Park, OH, 2016.
37. A. Kelly and G. J. Davies, Metall. Rev. 1965, vol. 10, pp. 1–77.10.1179/095066065790138357 ↗