The Yttrium Effect on Nanoscale Structure, Mechanical Properties, and High-Temperature Oxidation Resistance of (Ti0.6Al0.4)1–x Y x N Multilayer Coatings
Source abstract
Abstract
As machine tool coating specifications become increasingly stringent, the fabrication of protective titanium aluminum nitride (Ti-Al-N) films by physical vapor deposition (PVD) is progressively more demanding. Nanostructural modification through the incorporation of metal dopants can enhance coating mechanical properties. However, dopant selection and their near-atomic-scale role in performance optimization is limited. Here, yttrium was alloyed in multilayered Ti-Al-N films to tune microstructures, microchemistries, and properties, including mechanical characteristics, adhesion, wear resistance, and resilience to oxidation. By regulating processing parameters, the multilayer period (Λ) and Y content could be adjusted, which, in turn, permitted tailoring of grain nucleation and secondary phase formation. With the composition fixed at x = 0.024 in (Ti0.6Al0.4)1–x Y x N and Λ increased from 5.5 to 24 nm, the microstructure transformed from acicular grains with 〈111〉 preferred orientation to equiaxed grains with 〈200〉 texture, while the hardness (40.8 ± 2.8 GPa to 29.7 ± 4.9 GPa) and Young’s modulus (490 ± 47 GPa to 424 ± 50 GPa) concomitantly deteriorated. Alternately, when Λ = 5.5 nm and x in (Ti0.6Al0.4)1–x Y x N was raised from 0 to 0.024, the hardness was enhanced (28.7 ± 7.3 GPa to 40.8 ± 2.8 GPa) while adhesion and wear resistance were not compromised. The Ti-Al-N adopted a rock-salt type structure with Y displacing either Ti or Al and stabilizing a secondary wurtzite phase. Moreover, Y effectively retarded coating oxidation at 1073 K (800 °C) in air by inhibiting grain boundary oxygen diffusion.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced ceramic materials synthesis · Diamond and Carbon-based Materials Research
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (50)
Show source-provided references
1. A. Hörling, L. Hultman, M. Odén, J. Sjölén, and L. Karlsson: Surf. Coating Technol., 2005, vol. 191, pp. 384–92.10.1016/j.surfcoat.2004.04.056 ↗
2. H. Ichimura and A. Kawana: J. Mater. Res., 1993, vol. 8, pp. 1093–1100.10.1557/JMR.1993.1093 ↗
3. W. Kalss, A. Reiter, V. Derflinger, C. Gey, and J.L. Endrino: Int. J. Refract. Met. Hard Mater., 2006, vol. 24, pp. 399–404.10.1016/j.ijrmhm.2005.11.005 ↗
4. Birol Y (2011) Mater Sci Eng A 528: 8402–0910.1016/j.msea.2011.08.038 ↗
5. Y.H. Zhao, L. Hu, G.Q. Lin, J.Q. Xiao, C. Dong, and B.H. Yu: Int. J. Refract. Met. Hard Mater., 2012, vol. 32, pp. 27–32.10.1016/j.ijrmhm.2012.01.003 ↗
6. N.J.M. Carvalho, E. Zoestbergen, B.J. Kooi, and J.T.M. De Hosson: Thin Solid Films, 2003, vol. 429, pp. 179–89.10.1016/S0040-6090(03)00067-1 ↗
7. J.M. Cairney, S.G. Harris, P.R. Munroe, and E.D. Doyle: Surf. Coat. Technol., 2004, vol. 183, pp. 239–46.10.1016/j.surfcoat.2003.09.058 ↗
8. M.K. Samani, X.Z. Ding, N. Khosravian, B. Amin-Ahmadi, Yang Yi, G. Chen, E.C. Neyts, A. Bogaerts, and B.K. Tay: Thin Solid Films, 2015, vol. 578, pp. 133–38.10.1016/j.tsf.2015.02.032 ↗
9. M. Arab Pour Yazdi, F. Lomello, J. Wang, F. Sanchette, Z. Dong, T. White, Y. Wouters, F. Schuster, and A. Billard: Vacuum, 2014, vol. 109, pp. 43–51.10.1016/j.vacuum.2014.06.023 ↗
10. M. Keunecke, C. Stein, K. Bewilogua, W. Koelker, D. Kassel, and H. van den Berg: Surf. Coat. Technol., 2010, vol. 205, pp. 1273–78.10.1016/j.surfcoat.2010.09.023 ↗
11. G.S. Fox-Rabinovich, A.I. Kovalev, M.H. Aguirre, B.D. Beake, K. Yamamoto, S.C. Veldhuis, J.L. Endrino, D.L. Wainstein, and A.Y. Rashkovskiy: Surf. Coat. Technol., 2009, vol. 204, pp. 489–96.10.1016/j.surfcoat.2009.08.021 ↗
12. Z. Zhou, W.M. Rainforth, D.B. Lewis, S. Creasy, J.J. Forsyth, F. Clegg, A.P. Ehiasarian, P.E. Hovespian, and W.D. Münz: Surf. Coat. Technol., 2004, vols. 177–178, pp. 198–203.10.1016/j.surfcoat.2003.09.031 ↗
13. Martin Moser, Daniel Kiener, Christina Scheu, and Paul H. Mayrhofer: Materials, 2010, vol. 3, p. 1573.10.3390/ma3031573 ↗
14. R. Rachbauer, A. Blutmager, D. Holec, and P.H. Mayrhofer: Surf. Coat. Technol., 2012, vol. 206, pp. 2667–72.10.1016/j.surfcoat.2011.11.020 ↗
15. Lihui Zhu, Yumeng Zhang, Wangyang Ni, and Yixiong Liu: Surf. Coat. Technol., 2013, vol. 214, pp. 53–58.10.1016/j.surfcoat.2012.10.074 ↗
16. H. Riedl, D. Holec, R. Rachbauer, P. Polcik, R. Hollerweger, J. Paulitsch, and Paul H. Mayrhofer: Surf. Coat. Technol., 2013, vol. 235, pp. 174–80.10.1016/j.surfcoat.2013.07.030 ↗
17. Richard Rachbauer, David Holec, Martina Lattemann, Lars Hultman, and Paul H. Mayrhofer: Int. J. Mater. Res., 2011, vol. 102, pp. 735–42.10.3139/146.110520 ↗
18. M. Moser and P.H. Mayrhofer, Scripta Mater. 2007, vol. 57, pp. 357-60.10.1016/j.scriptamat.2007.04.019 ↗
19. L. Székely, G. Sáfrán, V. Kis, Z.E. Horváth, P.H. Mayrhofer, M. Moser, G. Radnóczi, F. Misják, and P.B. Barna: Surf. Coat. Technol., 2014, vol. 257, pp. 3–14.10.1016/j.surfcoat.2014.08.071 ↗
20. C. Ducros, C. Cayron, and F. Sanchette: Surf. Coat. Technol., 2006, vol. 201, pp. 136–42.10.1016/j.surfcoat.2005.11.102 ↗
21. W.C. Oliver and G.M. Pharr: J. Mater. Res., 1992, vol. 7, pp. 1564–83.10.1557/JMR.1992.1564 ↗
22. H. Bückle: Metall. Rev., 1959, vol. 4, pp. 49–100.10.1179/095066059790421746 ↗
23. F. Toscan, Laurent Antoni, Yves Wouters, M. Dupeux, and Alain Galerie: Mater. Sci. Forum, 2004, vol. 461, pp. 705–12.10.4028/www.scientific.net/MSF.461-464.705 ↗
24. G.B. Harris: London Edinb. Dubl. Phil. Mag., 1952, vol. 43, pp. 113–23.10.1080/14786440108520972 ↗
25. Joshua Pelleg, L.Z. Zevin, S. Lungo, and N. Croitoru: Thin Solid Films, 1991, vol. 197, pp. 117–28.10.1016/0040-6090(91)90225-M ↗
26. U.C. Oh and Jung Ho Je: J. Appl. Phys., 1993, vol. 74, pp. 1692–96.10.1063/1.355297 ↗
27. J.A. Venables: Philos. Mag., 1962, vol. 7, pp. 35–44.10.1080/14786436208201856 ↗
28. Charles P. Kempter, N.H. Krikorian, and Joseph C. McGuire: J. Phys. Chem., 1957, vol. 61, pp. 1237–38.10.1021/j150555a023 ↗
29. Heinz Schulz and K.H. Thiemann: Solid State Commun., 1977, vol. 23, pp. 815–19.10.1016/0038-1098(77)90959-0 ↗
30. K. Kutschej, P.H. Mayrhofer, M. Kathrein, P. Polcik, R. Tessadri, and C. Mitterer: Surf. Coat. Technol., 2005, vol. 200, pp. 2358–65.10.1016/j.surfcoat.2004.12.008 ↗
31. Ayako Kimura, Hiroyuki Hasegawa, Kunihiro Yamada, and Tetsuya Suzuki: Surf. Coat. Technol., 1999, vols. 120–121, pp. 438–41.10.1016/S0257-8972(99)00491-0 ↗
32. P.H. Mayrhofer, D. Music, and J.M. Schneider: Appl. Phys. Lett., 2006, vol. 88, p. 071922.10.1063/1.2177630 ↗
33. H.W. Hugosson, H. Högberg, M. Algren, M. Rodmar, and T.I. Selinder: J. Appl. Phys., 2003, vol. 93, pp. 4505–11.10.1063/1.1557779 ↗
34. G. Gerald Stoney: Proc. R. Soc. London, Ser. A, 1909, vol. 82, pp. 172–75.10.1098/rspa.1909.0021 ↗
35. L.A. Donohue, D.B. Lewis, W.D. Münz, M.M. Stack, S.B. Lyon, H.W. Wang, and D. Rafaja: Vacuum, 1999, vol. 55, pp. 109–14.10.1016/S0042-207X(99)00135-9 ↗
36. Florian Rovere and Paul H. Mayrhofer: J. Vac. Sci. Technol., A, 2007, vol. 25, pp. 1336–40.10.1116/1.2753842 ↗
37. Z.T. Wu, Z.B. Qi, F.P. Zhu, B. Liu, and Z.C. Wang: Phys. Procedia, 2013, vol. 50, pp. 150–55.10.1016/j.phpro.2013.11.025 ↗
38. C. Mitterer, P.H. Mayrhofer, and J. Musil: Vacuum, 2003, vol. 71, pp. 279–84.10.1016/S0042-207X(02)00751-0 ↗
39. F. Lomello, F. Sanchette, F. Schuster, M. Tabarant, and A. Billard: Surf. Coat. Technol., 2013, vol. 224, pp. 77–81.10.1016/j.surfcoat.2013.02.051 ↗
40. H.M. Tung, J.H. Huang, D.G. Tsai, C.F. Ai, and G.P. Yu: Mater. Sci. Eng., A, 2009, vol. 500, pp. 104–08.10.1016/j.msea.2008.09.006 ↗
41. D.C. Agrawal and R. Raj: Acta Metall., 1989, vol. 37, pp. 1265–70.10.1016/0001-6160(89)90120-X ↗
42. A. Leyland and A. Matthews: Wear, 2000, vol. 246, pp. 1–11.10.1016/S0043-1648(00)00488-9 ↗
43. Vitaliy Belous, Volodymyr Vasyliev, Alexandr Luchaninov, Volodymyr Marinin, Elena Reshetnyak, Volodymyr Strel’nitskij, Sergiy Goltvyanytsya, and Volodymyr Goltvyanytsya: Surf. Coat. Technol., 2013, vol. 223, pp. 68–74.10.1016/j.surfcoat.2013.02.031 ↗
44. M. Pfeiler, K. Kutschej, M. Penoy, C. Michotte, C. Mitterer, and M. Kathrein: Surf. Coat. Technol., 2007, vol. 202, pp. 1050–54.10.1016/j.surfcoat.2007.07.045 ↗
45. C. Mendibide, P. Steyer, J. Fontaine, and P. Goudeau: Surf. Coat. Technol., 2006, vol. 201, pp. 4119–24.10.1016/j.surfcoat.2006.08.013 ↗
46. H. Ju and J. Xu: Surf. Coat. Technol., 2015, vol. 283, pp. 311–17.10.1016/j.surfcoat.2015.10.068 ↗
47. B.A. Pint: Oxid. Met., 1996, vol. 45, pp. 1–37.10.1007/BF01046818 ↗
48. Igor Levin and David Brandon: J. Am. Ceram. Soc., 1998, vol. 81, pp. 1995–2012.10.1111/j.1151-2916.1998.tb02581.x ↗
49. P. Burtin, J.P. Brunelle, M. Pijolat, and M. Soustelle: Appl. Catal., 1987, vol. 34, pp. 239–54.10.1016/S0166-9834(00)82459-8 ↗
50. Jerzy Jedliński: Oxid. Metal, 1993, vol. 39, pp. 55–60.10.1007/BF00666609 ↗