Effect of Cu Addition on Precipitation and Growth Behavior of MnS in Silicon Steel Sheets
Source abstract
Abstract
The influence of Cu addition on MnS precipitation and growth behavior in Fe-2.88Si-0.1Mn-xCu (x = 0, 0.25) has been investigated. SEM observation clarified that Cu addition has no effect on the morphology of MnS or its growth rate at early stage. In contrast, Cu addition suppresses the growth rate at the Ostwald ripening stage. At the early stage of growth, a plateau region was observed both with and without Cu addition. Neither the conventional diffusion limited growth nor the Ostwald ripening theory adequately explains these observations. Using the Kampmann–Wagner Numerical (KWN) model, it was possible to successfully reproduce such behavior, including the plateau region. The interfacial energy between ferrite and the MnS was evaluated by the KWN-model, and good agreement was found with previously reported values. The suppression in the growth rate at the Ostwald ripening stage by Cu addition can be explained by a 15 pct reduction in the interfacial energy which possibly occurs due to the segregation of Cu at the interface between MnS and ferrite. This segregation was experimentally confirmed by STEM-EDX analysis.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and Mechanical Properties of Steels · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. A. Ray, S. K. Paul and S. Jha: J Mater. Eng. Perform., 1995, vol. 4, pp. 679-88.10.1007/BF02646444 ↗
2. S. K. Paul and A. Ray: J Mater. Eng. Perform., 1997, vol. 6, pp. 27-34.10.1007/s11665-997-0028-x ↗
3. Y. Tomita, N. Saito, T. Tsuzuki, Y. Tokunaga and K. Okamoto: ISIJ Int., 1994, vol. 34, pp. 829-35.10.2355/isijinternational.34.829 ↗
4. W. A. Spitzig and R. J. Sober: Metall. Trans. A, 1981, vol. 12A, pp. 281-91.10.1007/BF02655201 ↗
5. A. Chiba, I. Muto, Y. Sugawara and N. Hara: J. Electrochem. Soc., 2012, vol. 159, pp. C341-50.10.1149/2.054208jes ↗
6. M. A. Baker and J. E. Castle: Corros. Sci., 1993, vol. 34, pp. 667-82.10.1016/0010-938X(93)90279-P ↗
7. G. Wranglién: Corros. Sci., 1974, vol. 14, pp. 331-20.10.1016/S0010-938X(74)80047-8 ↗
8. K. F. Al Hajeri, C. I. Garicia, M. Hua and A. J. Deardo: ISIJ Int., 2006, vol. 46, pp. 1233-40.10.2355/isijinternational.46.1233 ↗
9. W. P. Sun, M. Militzer and J. J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 3013-23.10.1007/BF02646119 ↗
10. K. Oikawa, H. Otani, K. Ishida and T. Nishizawa: ISIJ Int., 1995, vol. 35, pp. 402-8.10.2355/isijinternational.35.402 ↗
11. M. Wakoh, T. Sawai and S. Mizoguchi: ISIJ Int., 1996, vol. 36, pp. 1014-21.10.2355/isijinternational.36.1014 ↗
12. S. Michra and V. Kumar: Mater. Sci. Eng. B, 1995, vol. B32, pp. 177-84.
13. Y. Ishiguro, K. Sato and T. Murayama: Mater. Trans., 2005, vol. 46, pp 769-78.10.2320/matertrans.46.769 ↗
14. C. Zener: J. Appl. Phys., 1949, vol. 20, pp. 950-3.10.1063/1.1698258 ↗
15. F. S. Ham: J. Phys. Chem. Solids, 1958, vol. 6, pp. 335-51.10.1016/0022-3697(58)90053-2 ↗
16. D. B. Rayaprolu and D. Jaffrey: Mater. Charact., 1990, vol. 24, pp. 245-73.10.1016/1044-5803(90)90054-N ↗
17. V. V. Popov: Phil. Mag. A, 2002, vol. 82, pp. 17-27.10.1080/01418610208239993 ↗
18. M. Perez, M. Dumont and D. Acevedo-Reyes: Acta Mater., 2008, vol. 56, pp. 2119-32.10.1016/j.actamat.2007.12.050 ↗
19. M. Lückl, S. Zamberger and E. Kozeschnik: Steel Res. Int., 2016, vol. 87, pp. 271-5.10.1002/srin.201500041 ↗
20. R. Kampmann and R. Wagner: Materials science and technology: A Comprehensive Treatment, Phase Transformation in Materials, Wiley-VCH, New York, NY, 1991, pp. 213-303.
21. J. D. Robson, M. J. Jones and P. B. Prangnell: Acta Mater., 2003, vol. 51, pp. 1453-68.10.1016/S1359-6454(02)00540-2 ↗
22. K. C. Russell, Phase Transformations, ASM, Metals Park, OH, 1970, pp. 219-68.
23. W. C. Johnson, C. L. White, P. E. Marth, P. K. Ruf, S. M. Tuominen, K. D. Wade, K. C. Russell and H. I. Aaronson: Metall. Trans. A, 1975, vol. 6A, pp. 911-9.10.1007/BF02672315 ↗
24. K. Nohara and K. Hirano: Proc. ICSTIS, Sec. 6, 1971, vol. 11, pp. 1267-73.
25. N. G. Ainslie and A. U. Seybolt: J. Iron Steel Inst., 1960, vol. 194, pp. 341-50.
26. D. M. Barnett, J. K. Lee, H. I. Aaronson and K. C. Russell: Scr. Metall., 1974,vol. 8, pp. 1447-50.10.1016/0036-9748(74)90187-2 ↗
27. J. D. Eshelby: Proc. Roy. Soc. A, 1957, vol. 241, pp. 376-96.10.1098/rspa.1957.0133 ↗
28. S. Furuseth and A. Kjekshus: Acta Chem. Scand., 1965, vol. 19, pp. 1405-10.10.3891/acta.chem.scand.19-1405 ↗
29. Z. S. Basinski, W. Hume-Rothery, and A. L. Sutton: P. Roy. Soc. Lond. A Mat., 1955, vol. 229, pp. 459-67.10.1098/rspa.1955.0102 ↗
30. J. L. Lytton: J. Appl. Phys., 1964, vol. 35, pp. 2397-406.10.1063/1.1702869 ↗
31. W. P. Sun, M. Militzer and J. J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 821-30.10.1007/BF02675559 ↗
32. O. Kavci and S. Cabuk: Comp. Mater. Sci., 2014, vol. 95, pp. 99-105.10.1016/j.commatsci.2014.07.022 ↗
33. H. M. Ledbetter and R. P. Reed: J. Phys. Chem. Ref. Data, 1973, vol. 2, pp. 513-618.10.1063/1.3253127 ↗
34. Y. Weng, H. Dong and Y. Gan, Advanced Steels: The Recent Scenario in Steel Science and Technology, Metallurgical Industry Press, Beijing, 2011, pp. 109-17.10.1007/978-3-642-17665-4 ↗
35. D. den Ouden, L. Zhao, C. Vuik, J. Sietsma, F. J. Vermolen, Comp. Mater. Sci., 2013, vol. 79, pp. 993-43.10.1016/j.commatsci.2013.07.047 ↗
36. W. M. Swift, Metall. Trans., 1973, vol. 4, pp. 153-7.10.1007/BF02649614 ↗
37. S. Suzuki, K. Kuroki, H. Kobayashi and N. Takahashi, Mater. Trans., 1992, vol. 33, pp. 1068-76.10.2320/matertrans1989.33.1068 ↗
38. Z. Liu, M. Kuwabara, R. Satake and T. Nagata, ISIJ Int., 2009, vol. 49, pp. 1087-93.10.2355/isijinternational.49.1087 ↗
39. X. L. Xin, J. Yang, Y. N. Wang, R. Z. Wang, W. L. Wang, H. G. Zheng and H. T. Hu, Ironmak. Steelmak., 2016, vol. 43, pp. 234-42.10.1179/1743281215Y.0000000041 ↗
40. A. Deschamps and Y. Bréchet: Acta Mater., 1999, vol. 47, pp. 293-305.10.1016/S1359-6454(98)00296-1 ↗