journal article·2024-03

Microstructures and Tensile Properties of Ti-6Al-4 V-(0, 2.5, 5, 7.5)Mo Alloys Manufactured by Metal Injection Molding

Chanun Suwanpreecha, Sukrit Songkuea, Makiko Tange, Anchalee Manonukul

Publisher page

Abstract

Ti-6Al-4 V is the most widely utilized titanium alloy. Mo is a β-stabilizing element, which can modify the microstructure and tensile properties of titanium alloys. In this work, the effects of Mo additions to Ti-6Al-4 V manufactured by metal injection molding were investigated. Sintering temperatures of 1100 and 1150 °C were employed to examine the microstructures and tensile properties. The tensile properties varied with Mo content and sintering temperature. Specifically, the ultimate tensile strength increased with Mo content at both temperatures. The strain to failure tended to decrease with Mo content when sintered at 1100 °C. However, at 1150 °C, the strain to failure significantly increased with a 2.5 wt pct Mo addition but decreased with the higher Mo additions. The strain to failure improved with a higher volume fraction of grain boundary α layers induced by Mo additions. However, at high Mo contents (> 5 wt pct Mo), the fracture was primarily governed by TiC. Hence, 5 wt pct of Mo addition is considered the threshold. In this study, Ti-6Al-4 V-2.5Mo sintered at 1150 °C exhibited the most optimal properties, making it an attractive choice for functional materials. Graphical Abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Orthopaedic implants and arthroplasty

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (57)

Show source-provided references
1. I. Polmear: Light Alloys: From Traditional Alloys to Nanocrystals, Elsevier, Amsterdam, 2005.
2. S.Y. Hong, I. Markus, and W.-C. Jeong: Int. J. Mach. Tools Manuf, 2001, vol. 41, pp. 2245–60.10.1016/S0890-6955(01)00041-4 ↗
3. K. Kudo, K. Shinagawa and H. Miura: Mech. Eng. J. 2018, vol. 5, pp. 17-00686-17-86.10.1299/mej.17-00686 ↗
4. F.H. Froes, S.J. Mashl, J.C. Hebeisen, V.S. Moxson, and V.A. Duz: JOM, 2004, vol. 56, pp. 46–48.10.1007/s11837-004-0252-x ↗
5. C. Suwanpreecha and A. Manonukul: SIAM Sci. Innov. Adv. Mater, 2021, vol. 1, pp. 64005–64105.
6. T. Ebel: In Handbook of Metal Injection Molding, ed. D. F. Heaney Woodhead Publishing: 2012, pp 415-45.10.1533/9780857096234.4.415 ↗
7. S. Bootchai, N. Taweejun, A. Manonukul, and C. Kanchanomai: J. Mater. Eng. Perform., 2020, vol. 29, pp. 1–10.10.1007/s11665-020-04970-z ↗
8. A.T. Sidambe, I.A. Figueroa, H.G.C. Hamilton, and I. Todd: J. Mater. Process. Technol., 2012, vol. 212, pp. 1591–97.10.1016/j.jmatprotec.2012.03.001 ↗
9. A.A. Hidalgo, T. Ebel, W. Limberg, and F. Pyczak: Key Eng. Mater., 2016, vol. 704, pp. 44–52.10.4028/www.scientific.net/KEM.704.44 ↗
10. G.C. Obasi, O.M. Ferri, T. Ebel, and R. Bormann: Mater. Sci. Eng. A, 2010, vol. 527, pp. 3929–35.10.1016/j.msea.2010.02.070 ↗
11. O.M. Ferri, T. Ebel, and R. Bormann: Mater. Sci. Eng. A, 2010, vol. 527, pp. 1800–05.10.1016/j.msea.2009.11.007 ↗
12. O.M. Ferri, T. Ebel, and R. Bormann: Mater. Sci. Eng. A, 2009, vol. 504, pp. 107–13.10.1016/j.msea.2008.10.039 ↗
13. C. Suwanpreecha, S. Songkuea, P. Wangjina, M. Tange, W. Pongsaksawad and A. Manonukul: Met. Mater. Int., 2023.
14. C. Suwanpreecha, E. Alabort, Y.T. Tang, C. Panwisawas, R.C. Reed, and A. Manonukul: Mater. Sci. Eng. A, 2021, vol. 812, p. 141081.10.1016/j.msea.2021.141081 ↗
15. F. Kafkas and T. Ebel: J. Alloys Compd., 2014, vol. 617, pp. 359–66.10.1016/j.jallcom.2014.07.168 ↗
16. P. Xu, F. Pyczak, W. Limberg, R. Willumeit-Römer, and T. Ebel: Mater. Des., 2021, vol. 211, p. 110141.10.1016/j.matdes.2021.110141 ↗
17. P. Xu, F. Pyczak, M. Yan, W. Limberg, R. Willumeit-Römer, and T. Ebel: Appl. Mater. Today, 2020, vol. 19, p. 100630.10.1016/j.apmt.2020.100630 ↗
18. W. Limberg, T. Ebel, F. Pyczak, M. Oehring, and F.P. Schimansky: Mater. Sci. Eng. A, 2012, vol. 552, pp. 323–29.10.1016/j.msea.2012.05.047 ↗
19. Y. Liu, Y. Pan, X. Lu, J. Sun, T. Hui, Y. Yang, A. Yu, X. Qu, and J. Zhang: Powder Technol., 2021, vol. 384, pp. 132–40.10.1016/j.powtec.2021.01.070 ↗
20. D. Banerjee and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
21. W. Weng, A. Biesiekierski, Y. Li, and C. Wen: Materialia, 2019, vol. 6, p. 100323.10.1016/j.mtla.2019.100323 ↗
22. L. Meng, Y. Zhang, X. Zhao, and D. Zhang: Mater. Sci. Eng. A, 2021, vol. 825, p. 141877.10.1016/j.msea.2021.141877 ↗
23. Y. Itoh, H. Miura, T. Uematsu, T. Osada, and K. Sato: J. Solid Mech. Mater. Eng., 2009, vol. 3, pp. 921–30.10.1299/jmmp.3.921 ↗
24. P. Zhao, Y. Song, K. Dong, D. Shan, and E.-H. Han: J. Alloys Compd., 2021, vol. 858, p. 157708.10.1016/j.jallcom.2020.157708 ↗
25. P.L. Narayana, S. Lee, S.-W. Choi, C.-L. Li, C.H. Park, J.-T. Yeom, N.S. Reddy, and J.-K. Hong: J. Alloys Compd., 2019, vol. 811, p. 152021.10.1016/j.jallcom.2019.152021 ↗
26. G. Chen, Q. Zhai, Z. Ma, X. Yin, Q. Zhang, H. Zhou, L. Meng, K. Wang, S. Wang, and L. Wang: Mater. Technol., 2022, vol. 37, pp. 1062–1074.10.1080/10667857.2021.1921098 ↗
27. D. Wu, W.-L. Wang, L.-G. Zhang, Z.-Y. Wang, K.-C. Zhou, and L.-B. Liu: Int. J. Miner. Metall. Mater., 2019, vol. 26, pp. 1151–65.10.1007/s12613-019-1854-1 ↗
28. Y. Itoh, T. Uematsu, K. Sato, H. Miura, and M. Niinomi: J. Jpn. Soc. Powder Powder Metall., 2006, vol. 53, pp. 750–54.10.2497/jjspm.53.750 ↗
29. R. Yamanoglu, A. Bahador, and K. Kondoh: J. Mater. Eng. Perform., 2021, vol. 30, pp. 3203–12.10.1007/s11665-021-05631-5 ↗
30. M. Rajadurai, A. Muthuchamy, A.R. Annamalai, D.K. Agrawal, and C.-P. Jen: Molecules, 2021, vol. 26, p. 2894.10.3390/molecules26102894 ↗
31. C. Sun, R. Xiao, H. Li, and Y. Ruan: Corros. Sci., 2022, vol. 200, p. 110232.10.1016/j.corsci.2022.110232 ↗
32. B.-S. Sung, T.-E. Park and Y.-H. Yun: Adv. Mater. Sci. Eng., 2015, vol. 2015.
33. D. Mareci, R. Chelariu, D. Gordin, M. Romas, D. Sutiman, and T. Gloriant: Mater. Corros., 2010, vol. 61, pp. 829–37.10.1002/maco.201005761 ↗
34. D. Mareci, R. Chelariu, I. Dan, D.-M. Gordin, and T. Gloriant: J. Mater. Sci. Mater. Med., 2010, vol. 21, pp. 2907–13.10.1007/s10856-010-4147-9 ↗
35. W. Xu, X. Lu, L.N. Wang, Z.M. Shi, S.M. Lv, M. Qian, and X.H. Qu: J. Mech. Behav. Biomed. Mater., 2018, vol. 88, pp. 534–47.10.1016/j.jmbbm.2018.08.038 ↗
36. J. Takekawa and N. Sakurai: J. Jpn. Soc. Powder Powder Metall., 1999, vol. 46, pp. 877–81.10.2497/jjspm.46.877 ↗
37. D.-P. Zhao, T. Ebel, M. Yan, and M. Qian: JOM, 2015, vol. 67, pp. 2236–43.10.1007/s11837-015-1590-6 ↗
38. M. Yan, M. Qian, C. Kong, and M.S. Dargusch: Acta Biomater., 2014, vol. 10, pp. 1014–23.10.1016/j.actbio.2013.10.034 ↗
39. X. Luo, T. Ebel, F. Pyczak, W. Limberg, and Y. Lin: Mater. Lett., 2017, vol. 193, pp. 295–98.10.1016/j.matlet.2017.01.145 ↗
40. Y. Liu, W.-F. Wei, K.-C. Zhou, L.-F. Chen, and H.-P. Tang: J. Cent. South Univ., 2003, vol. 10, pp. 81–86.10.1007/s11771-003-0043-5 ↗
41. S. Özbilen, D. Liebert, T. Beck, and M. Bram: Mater. Sci. Eng. C, 2016, vol. 60, pp. 446–57.10.1016/j.msec.2015.11.050 ↗
42. É. Baril: Powder Inject. Mould. Int., 2010, vol. 4, pp. 22–32.
43. M. Yan, M. Dargusch, T. Ebel, and M. Qian: Acta Mater., 2014, vol. 68, pp. 196–206.10.1016/j.actamat.2014.01.015 ↗
44. A. A. Hidalgo, T. Ebel, R. Frykholm, E. Carreño-Morelli and F. Pyczak: Mater. Today Commun., 2022, p. 104982.
45. G. Welsch, R. Boyer, and E. Collings: Materials Properties Handbook: Titanium Alloys, ASM International, Washington, DC, 1993.
46. J. Bidaux, C. Closuit, M. Rodriguez-Arbaizar, D. Zufferey, and E. Carreño-Morelli: PIM Int., 2012, vol. 6, pp. 72–75.
47. J.-E. Bidaux, R. Pasquier, M. Rodriguez-Arbaizar, H. Girard, and E. Carreño-Morelli: Powder Metall., 2014, vol. 57, pp. 320–23.10.1179/0032589914Z.000000000209 ↗
48. Y. Fu, W. Xiao, J. Wang, L. Ren, X. Zhao, and C. Ma: J. Mater. Sci. Technol., 2021, vol. 76, pp. 122–28.10.1016/j.jmst.2020.11.018 ↗
49. Y. Zhang, S. Fang, Y. Wang, and D. Zhang: Mater. Sci. Eng. A, 2021, vol. 803, p. 140701.10.1016/j.msea.2020.140701 ↗
50. S. Huang, Y. Zhao, J. Yu, C. Lin, C. Wu, and W. Jia: J. Alloys Compd., 2020, vol. 826, p. 154128.10.1016/j.jallcom.2020.154128 ↗
51. G.H. Zhao, X.Z. Liang, B. Kim, and P.E.J. Rivera-Díaz-del-Castillo: Mater. Sci. Eng. A, 2019, vol. 756, pp. 156–60.10.1016/j.msea.2019.04.027 ↗
52. A. Bahador, J. Umeda, R. Yamanoglu, T.A. Abu Bakar, and K. Kondoh: Mater. Sci. Eng. A, 2021, vol. 800, p. 140324.10.1016/j.msea.2020.140324 ↗
53. I. Toda-Caraballo and P.E. Rivera-Díaz-del-Castillo: Acta Mater., 2015, vol. 85, pp. 14–23.10.1016/j.actamat.2014.11.014 ↗
54. N. Hansen: Scr. Mater., 2004, vol. 51, pp. 801–06.10.1016/j.scriptamat.2004.06.002 ↗
55. M. Jia, D. Zhang, J. Liang, and B. Gabbitas: Metall. Mater. Trans. A, 2017, vol. 48, pp. 2015–29.10.1007/s11661-017-3965-5 ↗
56. S. Semiatin and T. Bieler: Acta Mater., 2001, vol. 49, pp. 3565–73.10.1016/S1359-6454(01)00236-1 ↗
57. M. Shahedi Asl, S.A. Delbari, M. Azadbeh, A. Sabahi Namini, M. Mehrabian, V.-H. Nguyen, Q.V. Le, M. Shokouhimehr, and M. Mohammadi: J. Mater. Res. Technol., 2020, vol. 9, pp. 10647–58.10.1016/j.jmrt.2020.07.066 ↗