Microtwinning in Single-Crystal Nickel-Based Superalloys During Compressive Deformation at 1000 °C
Source abstract
Abstract
Deformation modes in the directionally solidified nickel-based superalloy CM247LC and three single-crystal nickel-based superalloys PWA1483, DESC-1 (a new superalloy), René N5 oriented near the [001] direction have been studied in compression at 1000 °C and a strain rate of 2.5 × 10–4 s−1. It is found that the yield strength of the four alloys has the following trend: PWA1483 < CM247LC < DESC-1 < René N5. A transmission electron microscope was employed to characterize the substructures in the four alloys after around 2.5 pct plastic strain. We found that plastic deformation of PWA1483 and DESC-1 is dominated by stacking fault shearing and microtwinning, whereas dislocation climb, together with precipitate shearing achieved by pairs of a/2〈101〉 dislocations with the equal and dissimilar Burger vectors, governs the plastic deformation of CM247LC. As to René N5, although dislocation climb takes place frequently and microtwinning occurs occasionally, precipitate shearing involving the formation of anti-phase boundaries and single superlattice stacking faults plays an important role in the plastic deformation. Finally, on the basis of the experimental results, the connection between the alloy composition and deformation mechanisms together with the yield strength is analyzed. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgy and Material Forming · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (68)
Show source-provided references
1. R.C. Reed: The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. Y.M. Eggeler, K.V. Vamsi, and T.M. Pollock: Annu. Rev. Mater. Res., 2021, vol. 51, pp. 209–40.10.1146/annurev-matsci-102419-011433 ↗
3. S.M. Copley and B.H. Kear: AIME. Trans., 1967, vol. 239, pp. 984–92.
4. W.W. Milligan and S.D. Antolovich: Metall. Trans. A, 1987, vol. 18, pp. 85–95.10.1007/BF02646225 ↗
5. W.W. Milligan and S.D. Antolovich: Metall. Trans. A, 1991, vol. 22, pp. 2309–18.10.1007/BF02664997 ↗
6. M. Feller-Kniepmeier, T. Link, I. Poschmann, G. Scheunemann-Frerker, and C. Schulze: Acta Mater., 1996, vol. 44, pp. 2397–2407.10.1016/1359-6454(95)00354-1 ↗
7. F. Schubert, H.-J. Penkalla, and L. Singheiser: Int. J. Mater. Res., 2003, vol. 94, pp. 705–10.10.1515/ijmr-2003-0121 ↗
8. C.Y. Cui, Y.F. Gu, Y. Yuan, and H. Harada: Scripta Mater., 2011, vol. 64, pp. 502–05.10.1016/j.scriptamat.2010.11.025 ↗
9. P. Zhang, Y. Yuan, S.C. Shen, B. Li, R.H. Zhu, G.X. Yang, and X.L. Song: J. Alloys Compds., 2017, vol. 694, pp. 502–09.10.1016/j.jallcom.2016.09.303 ↗
10. Y.F. Liu, Y.S. Zhao, C.G. Liu, Y.Y. Guo, J. Zhang, Y.S. Luo, and J.B. Sha: Mater. Sci. Technol., 2018, vol. 34, pp. 1188–96.10.1080/02670836.2018.1429043 ↗
11. P. Zhang, Y. Yuan, Y.F. Gu, Y.Y. Dang, J.T. Lu, X.B. Zhao, J.C. Wang, C.Z. Zhu, and C.X. Fan: Mater. Charact., 2018, vol. 142, pp. 101–08.10.1016/j.matchar.2018.05.032 ↗
12. D. Barba, A. Egan, Y. Gong, M.J. Mills, R.C. Reed: Proceedings of the 14th International Symposium on Superalloys, S. Tin, M. Hardy, J. Clews, J. Cormier, Q. Feng, J. Marcin, C. O’Brien, A. Suzuki, eds., TMS, 2020, pp. 260–72.
13. Z.H. Tan, X.G. Wang, Y.L. Du, T.F. Duan, Y.H. Yang, J.L. Liu, J.D. Liu, L. Yang, J.G. Li, Y.Z. Zhou, and X.F. Sun: Mater. Sci. Eng. A, 2020, vol. 776, p. 138997.10.1016/j.msea.2020.138997 ↗
14. H. Zhang, Y. Pei, X. Gong, X. Chen, W. Zhang, P. Zhang, L. Li, Y. Liu, and Q. Wang: Mater. Charact., 2022, vol. 187, p. 111865.10.1016/j.matchar.2022.111865 ↗
15. P. Zhang, Y. Yuan, J. Li, J.B. Yan, H. Zhang, X.B. Zhao, X.B. Shi, and Y.F. Gu: Metall. Mater. Trans. A, 2022, vol. 53A, pp. 388–93.10.1007/s11661-021-06572-3 ↗
16. D. Bettge, W. Österle, and J. Ziebs: Int. J. Mater. Res., 1995, vol. 86, pp. 190–97.10.1515/ijmr-1995-860309 ↗
17. M. Yamashita and K. Kakehi: Scripta Mater., 2006, vol. 55, pp. 139–42.10.1016/j.scriptamat.2006.03.048 ↗
18. T.M. Smith, B.D. Esser, N. Antolin, A. Carlsson, R.E.A. Williams, A. Wessman, T. Hanlon, H.L. Fraser, W. Windl, D.W. McComb, and M.J. Mills: Nat. Commun., 2016, vol. 7, p. 13434.10.1038/ncomms13434 ↗
19. C.X. Dang, P. Zhang, J. Li, Z.H. Gao, B. Li, X.F. Gong, and X.L. Song: Mater. Charact., 2020, vol. 170, p. 110648.10.1016/j.matchar.2020.110648 ↗
20. P. Zhang, Y. Yuan, X.B. Shi, J. Li, J.B. Yan, J.T. Lu, and Y.F. Gu: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 3699–3705.10.1007/s11661-021-06370-x ↗
21. M. Nazmy, A. Künzler, J. Denk, and R. Baumann: Scripta Mater., 2002, vol. 47, pp. 521–25.10.1016/S1359-6462(02)00194-X ↗
22. T.M. Pollock, R.D. in Field: Dislocations in Solids. F.R.N. Nabarro, M.S. Duesbery (eds.), E-Publishing InC., New York, 2002, pp. 566–68.
23. P. Lv, L. Liu, G. Zhao, S. Guo, Z. Zhou, Y. Zhao, and J. Zhang: J. Alloys Compds., 2022, vol. 926, p. 166819.10.1016/j.jallcom.2022.166819 ↗
24. C. Schwalbe, J. Cormier, C.N. Jones, E. Galindo-Nava, and C.M.F. Rae: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3988–4002.10.1007/s11661-018-4764-3 ↗
25. D. Barba, E. Alabort, S. Pedrazzini, D.M. Collins, A.J. Wilkinson, P.A.J. Bagot, M.P. Moody, C. Atkinson, A. Jérusalem, and R.C. Reed: Acta Mater., 2017, vol. 135, pp. 314–29.10.1016/j.actamat.2017.05.072 ↗
26. J.B. le Graverend, F. Pettinari-Sturmel, J. Cormier, M. Hantcherli, P. Villechaise, and J. Douin: Mater. Sci. Eng. A, 2018, vol. 722, pp. 76–87.10.1016/j.msea.2018.02.086 ↗
27. J.L. Liu, T. Jin, X.F. Sun, J.H. Zhang, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 479, pp. 277–84.10.1016/j.msea.2007.07.050 ↗
28. J.J. Moverare, S. Johansson, and R.C. Reed: Acta Mater., 2009, vol. 57, pp. 2266–76.10.1016/j.actamat.2009.01.027 ↗
29. F. Sun, J. Zhang, and H. Harada: Acta Mater., 2014, vol. 67, pp. 45–57.10.1016/j.actamat.2013.12.011 ↗
30. C. Kienl, F.D. León-Cázares, and C.M.F. Rae: Acta Mater., 2022, vol. 225, p. 115743.10.1016/j.actamat.2019.12.047 ↗
31. P. Zhang, Y. Yuan, B. Li, G. Yang, and X. Song: Philos. Mag. Lett., 2016, vol. 96, pp. 238–45.10.1080/09500839.2016.1195931 ↗
32. L. Kovarik, R.R. Unocic, J. Li, P. Sarosi, C. Shen, Y. Wang, and M.J. Mills: Prog. Mater. Sci., 2009, vol. 54, pp. 839–73.10.1016/j.pmatsci.2009.03.010 ↗
33. D.M. Knowles and Q.Z. Chen: Mater. Sci. Eng. A, 2003, vol. 340, pp. 88–102.10.1016/S0921-5093(02)00172-7 ↗
34. R. Bonnet and D. David: Acta Metall. Mater., 1991, vol. 39, pp. 329–40.10.1016/0956-7151(91)90312-O ↗
35. M. Benyoucef, B. Décamps, A. Coujou, and N. Clément: Philos. Mag. A, 1995, vol. 71, pp. 907–23.10.1080/01418619508236228 ↗
36. Y. Yuan, Y. Gu, C. Cui, T. Osada, Z. Zhong, T. Tetsui, T. Yokokawa, and H. Harada: J. Mater. Res., 2011, vol. 26, pp. 2833–37.10.1557/jmr.2011.346 ↗
37. A. Breidi, J. Allen, and A. Mottura: Acta Mater., 2018, vol. 145, pp. 97–108.10.1016/j.actamat.2017.11.042 ↗
38. K. Kakehi: Scripta Mater., 1999, vol. 41, pp. 461–65.10.1016/S1359-6462(99)00191-8 ↗
39. S. Ma, L. Carroll, and T.M. Pollock: Acta Mater., 2007, vol. 55, pp. 5802–12.10.1016/j.actamat.2007.06.042 ↗
40. Y.H. Zhang, Q.Z. Chen, and D.M. Knowles: Mater. Sci. Technol., 2001, vol. 17, pp. 1551–55.10.1179/026708301101509818 ↗
41. P. Zhang, Y. Yuan, Z.H. Gao, J. Li, Q. Niu, X.B. Shi, Y.L. Zhou, and Y.F. Gu: Philos. Mag., 2022, vol. 102, pp. 2235–55.10.1080/14786435.2022.2108155 ↗
42. X.X. Yu and C.Y. Wang: Philos. Mag., 2012, vol. 92, pp. 4028–39.10.1080/14786435.2012.700419 ↗
43. D.J. Crudden, A. Mottura, N. Warnken, B. Raeisinia, and R.C. Reed: Acta Mater., 2014, vol. 75, pp. 356–70.10.1016/j.actamat.2014.04.075 ↗
44. M. Dodaran, A.H. Ettefagh, S.M. Guo, M.M. Khonsari, W.J. Meng, N. Shamsaei, and S. Shao: Intermetallics, 2020, vol. 117, p. 106670.10.1016/j.intermet.2019.106670 ↗
45. C.L. Zacherl, S.L. Shang, D.E. Kim, Y. Wang, Z.K. Liu: Proceedings of the twelfth International Symposium on Superalloys, E.S. Huron, R.C. Reed, M.C. Hardy, M.J. Mills, R.E. Montero, P.D. Portella, J. Telesmann, eds., TMS, 2012, pp. 455–61.
46. R.C. Reed, C.M.F. Rae: in Physical Metallurgy, D.E. Laughlin, K. Hono, eds., Elsevier, Amsterdam, 2014, pp. 2215–90.10.1016/B978-0-444-53770-6.00022-8 ↗
47. T.M. Smith, B.D. Esser, N. Antolin, G.B. Viswanathan, T. Hanlon, A. Wessman, D. Mourer, W. Windl, D.W. Mccomb, and M.J. Mills: Acta Mater., 2015, vol. 100, pp. 19–31.10.1016/j.actamat.2015.08.053 ↗
48. K. Suzuki, M. Ichihara, and S. Takeuchi: Acta Metall., 1979, vol. 27, pp. 193–200.10.1016/0001-6160(79)90096-8 ↗
49. M.S. Titus, Y.M. Eggeler, A. Suzuki, and T.M. Pollock: Acta Mater., 2015, vol. 82, pp. 530–39.10.1016/j.actamat.2014.08.033 ↗
50. T. Link and M. Feller-Kniepmeier: Metall. Trans. A, 1992, vol. 23, pp. 99–105.10.1007/BF02660857 ↗
51. G.B. Viswanathan, P.M. Sarosi, M.F. Henry, D.D. Whitis, W.W. Milligan, and M.J. Mills: Acta Mater., 2005, vol. 53, pp. 3041–57.10.1016/j.actamat.2005.03.017 ↗
52. P. Zhang, Y. Yuan, B. Li, S.W. Guo, G.X. Yang, and X.L. Song: Mater. Sci. Eng. A, 2016, vol. 655, pp. 152–59.10.1016/j.msea.2015.12.089 ↗
53. H. Harada, M. Yamazaki, and Y. Koizumi: Tetsu-To-Hagane, 1979, vol. 65, pp. 1049–58.10.2355/tetsutohagane1955.65.7_1049 ↗
54. Y. Ro, Y. Koizumi, and H. Harada: Mater. Sci. Eng. A, 1997, vol. 223, pp. 59–63.10.1016/S0921-5093(96)10504-9 ↗
55. T. Murakumo, T. Kobayashi, Y. Koizumi, and H. Harada: Acta Mater., 2004, vol. 52, pp. 3737–44.10.1016/j.actamat.2004.04.028 ↗
56. R.A. MacKay, T.P. Gabb, and M.V. Nathal: Mater. Sci. Eng. A, 2013, vol. 582, pp. 397–408.10.1016/j.msea.2013.04.072 ↗
57. C.M.F. Rae and R.C. Reed: Acta Mater., 2007, vol. 55, pp. 1067–81.10.1016/j.actamat.2006.09.026 ↗
58. G. Eggeler and A. Dlouhy: Acta Mater., 1997, vol. 45, pp. 4251–62.10.1016/S1359-6454(97)00084-0 ↗
59. R. Srinivasan, G.F. Eggeler, and M.J. Mills: Acta Mater., 2000, vol. 48, pp. 4867–78.10.1016/S1359-6454(00)00292-5 ↗
60. P. Zhang, J. Li, X.F. Gong, Y. Yuan, Y.F. Gu, J.C. Wang, J.B. Yan, and H.F. Yin: Mater. Charact., 2019, vol. 148, pp. 201–07.10.1016/j.matchar.2018.12.023 ↗
61. W. Blum, B. Reppich: in Creep behavior of Crystalline Solids, B. Wilshire, R.W. Evans, eds., Pineridge Press, Swansea, 1985, pp. 83–135
62. D. Mukherji, F. Jiao, W. Chen, and R.P. Wahi: Acta Metall. Mater., 1991, vol. 39, pp. 1515–24.10.1016/0956-7151(91)90237-U ↗
63. M.P. Jackson and R.C. Reed: Mater. Sci. Eng. A, 1999, vol. 259, pp. 85–97.10.1016/S0921-5093(98)00867-3 ↗
64. B.M.B. Grant, E.M. Francis, J. Quinta da Fonseca, M.R. Daymond, and M. Preuss: Acta Mater., 2012, vol. 60, pp. 6829–41.10.1016/j.actamat.2012.09.005 ↗
65. P. Zhang, Y. Yuan, J. Li, Y.F. Xu, X. Song, and G. Yang: Mater. Sci. Eng. A, 2017, vol. 702, pp. 343–49.10.1016/j.msea.2017.07.025 ↗
66. J.L. Liu, T. Jin, J.J. Yu, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2010, vol. 527, pp. 890–97.10.1016/j.msea.2009.10.001 ↗
67. B. Du, J. Yang, C. Cui, and X. Sun: Mater. Sci. Eng. A, 2015, vol. 623, pp. 59–67.10.1016/j.msea.2014.11.041 ↗
68. D.A. Grose and G.S. Ansell: Metall. Trans. A, 1981, vol. 12, pp. 1631–45.10.1007/BF02643569 ↗