journal article·2023-01

The Inhomogeneous Microstructure and Mechanical Properties of Ti–6Al–4V Additively Manufactured by Electron Beam Freeform Fabrication

Samuel J. Present, Karen M. Taminger, Christopher S. Domack, Kevin J. Hemker

Publisher page

Abstract

Electron beam freeform fabrication (EBF3), a wire-fed directed energy deposition additive manufacturing process that enables high deposition rates of non-powder feedstock in vacuum, is an attractive option for additively manufacturing large-scale structural components. There is interest in using these components in the as-deposited condition, since heat treatments or other post-processing techniques are costly and would be difficult in a remote environment. The relationships between build parameters, the resultant as-deposited microstructure, and the attendant mechanical properties of material produced by EBF3 are not well established. This study of EBF3 of alloy Ti–6Al–4V was undertaken to elucidate the local mechanical response of disparate microstructural regions with milli-scale tensile tests and digital strain mapping. The strain mapping revealed a composite-like response wherein fine lamellar (alpha+eta ) regions exhibit a greater yield strength than the periodic layer bands associated with the deposition process and comprised of coarser lamellar (alpha+eta.) This finding suggests that the bulk mechanical response can be tailored through the orientation of the layer bands. Investigation of the effect of heat treatment on the microstructure and resultant mechanical response demonstrated that both are homogenized by a 1100 °C (eta ) solution heat treatment.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · High Entropy Alloys Studies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. S.W. Williams, F. Martina, A.C. Addison, J. Ding, G. Pardal, and P. Colegrove: Mater. Sci. Technol., 2016, Vol. 32, pp. 641–47.10.1179/1743284715Y.0000000073 ↗
2. D. Ding, Z. Pan, D. Cuiuri, and H. Li: Int. J. Adv. Manuf. Technol., 2015, Vol. 81, pp. 465–81.10.1007/s00170-015-7077-3 ↗
3. B. Dutta and F.S. Froes: Met. Powder Rep., 2017, Vol. 72, pp. 96–106.10.1016/j.mprp.2016.12.062 ↗
4. W.J. Sames, F. List, S. Pannala, R.R. Dehoff, and S.S. Babu: Int. Mater. Rev., 2016, Vol. 61, pp. 315–60.
5. J. Xu, J. Zhu, J. Fan, Q. Zhou, Y. Peng, and S. Guo: Vacuum, 2019, Vol. 167, pp. 364–73.10.1016/j.vacuum.2019.06.030 ↗
6. K.M. Taminger and R.A. Hafley: NATO AVT, 2006, Vol. 139, p. 16-1.
7. K.M. Taminger and R.A. Hafley: in 3rd Annual Auto motive Composites Conference, Troy, MI, SPE Automotive, 2003.
8. I. Gibson, D.W. Rosen, B. Stucker, and M. Khorasani: Addit. Manuf. Technol., 2021, Vol. 17, pp. 136–40.
9. Sciaky, Inc., Electron Beam Additive Manufacturing (EBAM®), 2022, https://www.sciaky.com, accessed 11 August 2022.
10. T. DebRoy, H. Wei, J. Zuback, T. Mukherjee, J. Elmer, J. Milewski, A.M. Beese, A.D. Wilson-Heid, A. De, and W. Zhang: Prog. Mater. Sci., 2018, Vol. 92, pp. 112–224.10.1016/j.pmatsci.2017.10.001 ↗
11. S. Liu and Y.C. Shin: Mater. Des., 2019, Vol. 164, p. 107552.10.1016/j.matdes.2018.107552 ↗
12. B. Baufeld, E. Brandl, and O. Van der Biest: J. Mater. Process. Technol., 2011, Vol. 211, pp. 1146–58.10.1016/j.jmatprotec.2011.01.018 ↗
13. E. Brandl, B. Baufeld, C. Leyens, and R. Gault: Phys. Procedia, 2010, Vol. 5, pp. 595–606.10.1016/j.phpro.2010.08.087 ↗
14. S. Gorsse, C. Hutchinson, M. Gouné, and R. Banerjee: Sci. Technol. Adv. Mater., 2017, Vol. 18, pp. 584–610.10.1080/14686996.2017.1361305 ↗
15. A. Saboori, D. Gallo, S. Biamino, P. Fino, and M. Lombardi: Appl. Sci., 2017, Vol. 7, p. 883.10.3390/app7090883 ↗
16. Z. Liu, B. He, T. Lyu, and Y. Zou: JOM, 2021, Vol. 73, pp. 1804–1818.10.1007/s11837-021-04670-6 ↗
17. M. Neikter, P. Åkerfeldt, R. Pederson, M.-L. Antti, and V. Sandell: Mater. Charact., 2018, Vol. 143, pp. 68–75.10.1016/j.matchar.2018.02.003 ↗
18. X. Wu, J. Liang, J. Mei, C. Mitchell, P. Goodwin, and W. Voice: Mater. Des., 2004, Vol. 25, pp. 137–44.10.1016/j.matdes.2003.09.009 ↗
19. E. Brandl, A. Schoberth, and C. Leyens: Mater. Sci. Eng. A, 2012, Vol. 532, pp. 295–307.10.1016/j.msea.2011.10.095 ↗
20. S.M. Kelly: PhD thesis, Virginia Tech, 2004, https://vtechworks.lib.vt.edu/handle/10919/29731.
21. S.H. Mok, G. Bi, J. Folkes, and I. Pashby: Surf. Coat. Technol., 2008, Vol. 202, pp. 3933–39.10.1016/j.surfcoat.2008.02.008 ↗
22. F. Wang, S. Williams, P. Colegrove, and A.A. Antonysamy: Metall. Mater. Trans. A, 2013, Vol. 44A, pp. 968–77.10.1007/s11661-012-1444-6 ↗
23. A. Ho, H. Zhao, J.W. Fellowes, F. Martina, A.E. Davis, and P.B. Prangnell: Acta Mater., 2019, Vol. 166, pp. 306–323.10.1016/j.actamat.2018.12.038 ↗
24. T. Yvinec, A. Naït-Ali, D. Mellier, D. Bertheau, J. Cormier, P. Villechaise, L. Rat, and S. Hémery: Addit. Manuf., 2022, Vol. 55, p. 102830.10.1016/j.addma.2022.102830 ↗
25. T.A. Book and M.D. Sangid: Mater. Charact., 2016, Vol. 122, pp. 104–112.10.1016/j.matchar.2016.10.018 ↗
26. D. Lunt, A. Ho, A. Davis, A. Harte, F. Martina, J.Q. da Fonseca, and P. Prangnell: Mater. Sci. Eng. A, 2020, Vol. 788, p. 139608.10.1016/j.msea.2020.139608 ↗
27. Z. Alam, D. Eastman, M. Jo, and K. Hemker: JOM, 2016, Vol. 68, pp. 2754–60.10.1007/s11837-016-2100-1 ↗
28. A. Banerjee, S. Messina, M.R. Begley, E.J. Schwalbach, M.A. Groeber, W.D. Musinski, P.A. Shade, M.E. Cox, J.D. Miller, and K.J. Hemker: Scripta Mater., 2021, Vol. 205, p. 114188.10.1016/j.scriptamat.2021.114188 ↗
29. C.A. Schneider, W.S. Rasband, and K.W. Eliceiri: Nat. Methods, 2012, Vol. 9, pp. 671–75.10.1038/nmeth.2089 ↗
30. M. Bermingham, L. Nicastro, D. Kent, Y. Chen, and M. Dargusch: J. Alloys Compd., 2016, Vol. 753, pp. 247–55.10.1016/j.jallcom.2018.04.158 ↗
31. G. Lütjering and J.C. Williams: Titanium, Springer, Berlin, 2007, pp. 203–250.
32. P.A. Kobryn and S. Semiatin: J. Mater. Process. Technol., 2003, Vol. 135, pp. 330–39.10.1016/S0924-0136(02)00865-8 ↗
33. A. Shaikh, S. Kumar, A. Dawari, S. Kirwai, A. Patil, and R. Singh: Procedia Struct. Integrity, 2019, Vol. 14, pp. 782–89.10.1016/j.prostr.2019.07.056 ↗
34. E. Brandl and D. Greitemeier: Mater. Lett., 2012, Vol. 81, pp. 84–87.10.1016/j.matlet.2012.04.116 ↗
35. B. Venkatesh, D. Chen, and S. Bhole: Mater. Sci. Eng. A, 2009, Vol. 506, pp. 117–124.10.1016/j.msea.2008.11.018 ↗
36. P. Åkerfeldt, M.-L. Antti, and R. Pederson: Mater. Sci. Eng. A, 2016, Vol. 674, pp. 428–37.10.1016/j.msea.2016.07.038 ↗
37. F. Larson and A. Zarkades: Properties of textured titanium alloys, Tech. Rep., Metals and Ceramics Information Center, Columbus, 1974.10.21236/AD0781884 ↗
38. J.J. Lewandowski and M. Seifi: Annu. Rev. Mater. Res., 2016, Vol. 46, pp. 151–86.10.1146/annurev-matsci-070115-032024 ↗
39. D. Foehring, H.B. Chew, and J. Lambros: Mater. Sci. Eng. A, 2018, Vol. 724, pp. 536–46.10.1016/j.msea.2018.03.091 ↗