journal article·2023-05Open access

Evolution of Microstructure and Mechanical Properties of ATI 718Plus® Superalloy After Graded Solution Treatment

Sebastian Lech, Agnieszka M. Wusatowska-Sarnek, Krzysztof Wieczerzak, Adam Kruk

Abstract

Abstract The evolution of microstructure and mechanical properties of ATI 718Plus® superalloy subjected to a graded solution treatment was evaluated. Graded solution treatment was performed on a single bar of 718Plus superalloy for 1 hour within a temperature range of 907 °C to 1095 °C. It resulted in a graded microstructure investigated mainly by light microscopy, scanning-, and transmission electron microscopy. A quantitative analysis of identified phases was performed. Mechanical properties were assessed using the Vickers hardness test and correlated with the microstructural changes. The structure–property relationship between 718Plus superalloy microstructure and mechanical properties was established. The change of theγphase grain size in the single-phase range did not affect the hardness in a meaningful manner. Significant increases in hardness were observed after the introduction ofγ′ andηphases. Phase stability limits were determined experimentally and compared with those calculated using the Thermo-Calc software.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. S. Patel, J. Debarbadillo, and S. Coryell: in Superalloy 718 and Derivatives, vol. 1, Springer, 2018, pp. 23–49.10.1007/978-3-319-89480-5_2 ↗
2. K. Kulawik, P.A. Buffat, A. Kruk, A.M. Wusatowska-Sarnek, and A. Czyrska-Filemonowicz: Mater. Charact., 2015, vol. 100, pp. 74–80.10.1016/j.matchar.2014.12.012 ↗
3. J.F. Radavich: in Superalloys 718 Metallurgy and Applications, vol. 1, 1989, pp. 229–40.
4. J.M. Oblak, D.F. Paulonis, and D.S. Duvall: Metall. Trans., 1974, vol. 5, pp. 143–53.10.1007/BF02642938 ↗
5. R. Cozar and A. Pineau: Metall. Trans., 1973, vol. 4, pp. 47–59.10.1007/BF02649604 ↗
6. A. Oradei-Basile and J.F. Radavich: in Superalloys 718, 625 and Various Derivatives, 1991, pp. 325–35.10.7449/1991/Superalloys_1991_325_335 ↗
7. R.E. Schafrik, D.D. Ward, and J.R. Groh: in Superalloys 718, 625, 706 and Various Derivatives, 2001, pp. 1–11.10.7449/2001/Superalloys_2001_1_11 ↗
8. R.L. Kennedy: in Superalloys 718, 625, 706 and Various Derivatives 2005, 2005, pp. 1–14.10.7449/2005/Superalloys_2005_1_14 ↗
9. E.A. Ott, J. Groh, and H. Sizek: in Superalloy 718, 625, 706 and Derivatives 2005, 2005, pp. 35–45.10.7449/2005/Superalloys_2005_35_45 ↗
10. W.-D. Cao and R. Kennedy: in Superalloys 2004, 2004, pp. 91–99.10.7449/2004/Superalloys_2004_91_99 ↗
11. X. Xie, G. Wang, J. Dong, C. Xu, W.-D. Cao, and R. Kennedy: Superalloys 718, 625, 706 and Various Derivatives (2005), 2005, pp. 179–91.
12. E.J. Pickering, H. Mathur, A. Bhowmik, O.M.D.M. Messé, J.S. Barnard, M.C. Hardy, R. Krakow, K. Loehnert, H.J. Stone, and C.M.F. Rae: Acta Mater., 2012, vol. 60, pp. 2757–69.10.1016/j.actamat.2012.01.042 ↗
13. O.M. Messé, J.S. Barnard, E.J. Pickering, P.A. Midgley, and C.M.F. Rae: Philos. Mag., 2014, vol. 94, pp. 1132–52.10.1080/14786435.2013.878052 ↗
14. A. Casanova, M.C. Hardy, and C.M.F.F. Rae: in 8th International Symposium on Superalloy 718 and Derivatives, 2014, pp. 573–86.10.1002/9781119016854.ch45 ↗
15. S. Lech, A. Kruk, G. Cempura, A. Gruszczyński, A. Gil, A. Agüero, A.M. Wusatowska-Sarnek, and A. Czyrska-Filemonowicz: J. Mater. Eng. Perform., 2020, vol. 29, pp. 1453–59.10.1007/s11665-019-04474-5 ↗
16. M. Wang, Q. Deng, J. Du, Z. Tian, and J. Zhu: Mater. Trans., 2015, vol. 56, pp. 635–41.10.2320/matertrans.M2014378 ↗
17. J. Li, R. Ding, Q. Guo, C. Li, Y. Liu, Z. Wang, H. Li, and C. Liu: Mater. Sci. Eng. A, 2021, vol. 812, p. 141113.10.1016/j.msea.2021.141113 ↗
18. G.A. Zickler, R. Schnitzer, R. Radis, R. Hochfellner, R. Schweins, M. Stockinger, and H. Leitner: Mater. Sci. Eng. A, 2009, vol. 523, pp. 295–303.10.1016/j.msea.2009.06.014 ↗
19. K.A. Unocic and B.A. Pint: in 8th International Symposium on Superalloy 718 and Derivatives, 2014, pp. 667–77.10.1002/9781119016854.ch52 ↗
20. A. Kruk, S. Lech, A. Gil, G. Cempura, A. Agüero, A.M. Wusatowska-Sarnek, and A. Czyrska-Filemonowicz: Corros. Sci., 2020, vol. 169, p. 108634.10.1016/j.corsci.2020.108634 ↗
21. S. Lech, A. Kruk, A. Gil, G. Cempura, A. Agüero, and A. Czyrska-Filemonowicz: Scripta Mater., 2019, vol. 167, pp. 16–20.10.1016/j.scriptamat.2019.03.027 ↗
22. X. Xie, C. Xu, G. Wang, J. Dong, W.D. Cao, and R. Kennedy: in Superalloys 718, 625, 706 and Derivatives 2005, 2005, pp. 193–202.10.7449/2005/Superalloys_2005_193_202 ↗
23. W.D. Cao: in Superalloys 2008, 2008, pp. 789–97.10.7449/2008/Superalloys_2008_789_797 ↗
24. J. Zhang, C. Wu, Y. Peng, X. Xia, J. Li, J. Ding, C. Liu, X. Chen, J. Dong, and Y. Liu: J. Alloys Compd., 2020, vol. 835, p. 155195.10.1016/j.jallcom.2020.155195 ↗
25. B. Xie, B. Zhang, H. Yu, H. Yang, Q. Liu, and Y. Ning: Mater. Sci. Eng. A, 2020, vol. 784, p. 139334.10.1016/j.msea.2020.139334 ↗
26. R. Hayes, E. Thompson, K. Johnson, and A. Aichlmayr: Mater. Sci. Eng. A, 2009, vol. 510–511, pp. 256–61.10.1016/j.msea.2008.04.134 ↗
27. J. Andersson, G.P. Sjöberg, L. Viskari, and M. Chaturvedi: Mater. Sci. Technol., 2012, vol. 28, pp. 733–41.10.1179/1743284712Y.0000000002 ↗
28. M. Markl, A. Müller, N. Ritter, M. Hofmeister, D. Naujoks, H. Schaar, K. Abrahams, J. Frenzel, A.P.A. Subramanyam, A. Ludwig, J. Pfetzing-Micklich, T. Hammerschmidt, R. Drautz, I. Steinbach, R. Rettig, R.F. Singer, and C. Körner: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 4134–45.10.1007/s11661-018-4759-0 ↗
29. C. Rae: Mater. Sci. Technol., 2009, vol. 25, pp. 479–87.10.1179/174328408X372056 ↗
30. K. Wieczerzak, O. Nowicka, S. Michalski, T.E.J. Edwards, M. Jain, T. Xie, L. Pethö, X. Maeder, and J. Michler: Mater. Des., 2021, vol. 205, p. 109710.10.1016/j.matdes.2021.109710 ↗
31. J.O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: CALPHAD, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
32. J. Schindelin, I. Arganda-Carreras, E. Frise, V. Kaynig, M. Longair, T. Pietzsch, S. Preibisch, C. Rueden, S. Saalfeld, B. Schmid, J.Y. Tinevez, D.J. White, V. Hartenstein, K. Eliceiri, P. Tomancak, and A. Cardona: Nat. Methods, 2012, vol. 9, pp. 676–82.10.1038/nmeth.2019 ↗
33. A. Kruk, G. Cempura, S. Lech, A.M. Wusatowska-Sarnek, and A. Czyrska-Filemonowicz: in Proceedings of the 9th International Symposium on Superalloy 718 and Derivatives: Energy, Aerospace, and Industrial Applications, 2018, pp. 1035–50.10.1007/978-3-319-89480-5_69 ↗
34. A. Kruk, G. Cempura, S. Lech, and A. Czyrska-Filemonowicz: Arch. Metall. Mater., 2016, vol. 61, pp. 535–41.10.1515/amm-2016-0093 ↗
35. C. Wei and J.-C. Zhao: Materialia (Oxf.), 2018, vol. 3, pp. 31–40.10.1016/j.mtla.2018.10.003 ↗
36. V.A. Hosseini, L. Karlsson, K. Hurtig, I. Choquet, D. Engelberg, M.J. Roy, and C. Kumara: Mater. Des., 2017, vol. 121, pp. 11–23.10.1016/j.matdes.2017.02.042 ↗
37. Y. Ning, Z. Yao, H. Guo, and M.W. Fu: J. Alloys Compd., 2013, vol. 557, pp. 27–33.10.1016/j.jallcom.2013.01.011 ↗
38. P.J. Ennis, A. Strang, S.P. Gill, G.M. McColvin, and H.V. Atkinson: Energy Mater., 2012, vol. 4, p. 4.
39. K. Löhnert and F. Pyczak: in 7th International Symposium on Superalloy 718 and Derivatives, 2010, pp. 877–91.10.7449/2010/Superalloys_2010_877_891 ↗
40. W.D. Cao: in Superalloys 718, 625, 706 and Various Derivatives 2005, 2005, pp. 165–77.10.7449/2005/Superalloys_2005_165_177 ↗
41. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 1588–1603.10.1007/s11661-009-9858-5 ↗
42. T.M. Smith, B.D. Esser, N. Antolin, A. Carlsson, R.E.A. Williams, A. Wessman, T. Hanlon, H.L. Fraser, W. Windl, D.W. McComb, and M.J. Mills: Nat. Commun., 2016, vol. 7, pp. 1–7.
43. M.C. Hardy, M. Detrois, E.T. McDevitt, C. Argyrakis, V. Saraf, P.D. Jablonski, J.A. Hawk, R.C. Buckingham, H.S. Kitaguchi, and S. Tin: Metall. Mater. Trans. A, 2020, vol. 51A, pp. 2626–50.10.1007/s11661-020-05773-6 ↗
44. L. Wu, T. Osada, I. Watanabe, T. Yokokawa, T. Kobayashi, and K. Kawagishi: Mater. Sci. Eng. A, 2021, vol. 799, p. 140103.10.1016/j.msea.2020.140103 ↗
45. H.A. Roth, C.L. Davis, and R.C. Thomson: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1329–35.10.1007/s11661-997-0268-2 ↗
46. A.J. Goodfellow, E.I. Galindo-Nava, C. Schwalbe, and H.J. Stone: Mater. Des., 2019, vol. 173, pp. 1–5.10.1016/j.matdes.2019.107760 ↗
47. A.J. Goodfellow, E.I. Galindo-Nava, K.A. Christofidou, N.G. Jones, C.D. Boyer, T.L. Martin, P.A.J. Bagot, M.C. Hardy, and H.J. Stone: Acta Mater., 2018, vol. 153, pp. 290–302.10.1016/j.actamat.2018.04.064 ↗
48. A.J. Goodfellow: Mater. Sci. Technol., 2018, vol. 34, pp. 1793–1808.10.1080/02670836.2018.1461594 ↗
49. N.C. Ritter, R. Sowa, J.C. Schauer, D. Gruber, T. Goehler, R. Rettig, E. Povoden-Karadeniz, C. Koerner, and R.F. Singer: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 3206–16.10.1007/s11661-018-4730-0 ↗
50. C. Sommitsch, D. Huber, I.S. Fredrik, S. Mitsche, M. Stockinger, and B. Buchmayr: Int. J. Mater. Res., 2009, vol. 100, pp. 1088–98.10.3139/146.110152 ↗