journal article·2023-05Open access

Physics-Based Flow Stress Model for Alloy 718

Marie Anna Moretti, Lars-Erik Lindgren, Paul Åkerström

Abstract

Abstract A dislocation density-based model for alloy 718 in the annealed state is proposed in order to accurately describe the deformation behavior of this alloy for a wide range of thermo-mechanical loadings. The model accounts for numerous microstructural mechanisms, including strain hardening, grain size effect, dynamic strain aging (DSA), solid solution strengthening, as well as phonon and electron drag which affects dislocation movements at high strain rates. Two types of recovery mechanisms are also included: recovery due to dislocation glide and recovery associated with cross-slip of screw dislocations. The model is calibrated using experimentally determined stress–strain curves for both low and high strain rates in the order of 10–3to 103 s−1, and for temperatures in the range 20 °C to 800 °C. The stress–strain data computed with the model are in good agreement with the experimental data. The inclusion of DSA is found to be effective in the combination of temperatures and strain rates corresponding to experimental observations. The solid solution strengthening contribution increases with decreasing temperature and increasing strain rate. The drag effect in the model proves to be significant only for deformation at high strain rate (~ 103 s−1).
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Nuclear Materials and Properties · Fusion materials and technologies · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (88)

Show source-provided references
1. H.J. Frost and M.F. Ashby: Deformation-mechanism maps: The plasticity and creep of metals and ceramics. https://engineering.dartmouth.edu/defmech/. Accessed 8 Feb 2021.
2. K. Prasad, R. Sarkar, P. Ghosal, and V. Kumar: Mater. Des., 2010, vol. 31, pp. 4502–507.10.1016/j.matdes.2010.04.019 ↗
3. V. Garat, J.M. Cloue, D. Poquillon, and E. Andrieu: J. Nucl. Mater., 2008, vol. 375, pp. 95–101.10.1016/j.jnucmat.2007.10.009 ↗
4. W. Chen and M.C. Chaturvedi: Mater. Sci. Eng. A, 1997, vol. 229, pp. 163–68.10.1016/S0921-5093(97)00005-1 ↗
5. K. Saravanan, V.S.K. Chakravadhanula, S.K. Manwatkar, S.V.S.N. Murty, and P.R. Narayanan: Metall. Mater. Trans. A, 2020, vol. 51, pp. 5691–703.10.1007/s11661-020-05970-3 ↗
6. M.L. Weaver and C.S. Hale: in Proceedings of the International Symposium on Superalloys and Various Derivatives, E.A. Loria, ed., vol. 1, The Minerals, Metals and Materials Society, 2001, pp. 421–32.10.7449/2001/Superalloys_2001_421_432 ↗
7. B. Max, J.S. Juan, M.L. Nó, J.M. Cloue, B. Viguier, and E. Andrieu: Metall. Mater. Trans. A, 2018, vol. 49, pp. 2057–68.10.1007/s11661-018-4579-2 ↗
8. A. Iturbe, E. Giraud, E. Hormaetxe, A. Garay, G. Germain, K. Ostolaza, and P.J. Arrazola: Mater. Sci. Eng. A, 2017, vol. 682, pp. 441–53.10.1016/j.msea.2016.11.054 ↗
9. S.L. Soo, D.K. Aspinwall, and R.C. Dewes: J. Mater. Process. Technol., 2004, vol. 150, pp. 116–23.10.1016/j.jmatprotec.2004.01.046 ↗
10. G. Asala, J. Andersson, and O.A. Ojo: Philos. Mag., 2019, vol. 99, pp. 419–37.10.1080/14786435.2018.1540891 ↗
11. W.S. Lee, C.F. Lin, T.H. Chen, and H.W. Chen: Mater. Trans., 2011, vol. 52, pp. 1734–740.10.2320/matertrans.M2011130 ↗
12. W.S. Lee, C.F. Lin, T.H. Chen, and H.W. Chen: Mater. Sci. Eng. A, 2011, vol. 528, pp. 6279–286.10.1016/j.msea.2011.04.079 ↗
13. X. Wang, C. Huang, B. Zou, H. Liu, H. Zhu, and J. Wang: Mater. Sci. Eng. A, 2013, vol. 580, pp. 385–90.10.1016/j.msea.2013.05.062 ↗
14. W.S. Lee, C.F. Lin, T.H. Chen, and C.S. Huang: Mater. Trans., 2012, vol. 53, pp. 1758–764.10.2320/matertrans.M2012073 ↗
15. Y. Bergström: Mater. Sci. Eng., 1970, vol. 5, pp. 193–200.10.1016/0025-5416(70)90081-9 ↗
16. Y. Bergström: Rev. Powder Metall. Phys. Ceram., 1983, pp. 79–265.
17. U.F. Kocks, A.S. Argon, and M.F. Ashby: Thermodynamics and Kinetics of Slip, Pergamon Press, Oxford, 1975.
18. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–875.10.1016/0001-6160(81)90112-7 ↗
19. H. Mecking: in Work hardening in tension and fatigue: proceedings of a symposium, The Metall. Soc. AIME., 1977, pp. 67–90.
20. Y. Estrin: in Unified Constitutive Laws of Plastic Deformation, A.S. Krausz and K. Krausz, eds., Academic Press, 1996, pp. 69–106.10.1016/B978-012425970-6/50003-5 ↗
21. Y. Estrin and H. Mecking: Acta Metall., 1984, vol. 32, pp. 57–70.10.1016/0001-6160(84)90202-5 ↗
22. M. Fisk and A. Lundbäck: Finite Elem. Anal. Des., 2012, vol. 58, pp. 66–73.10.1016/j.finel.2012.04.002 ↗
23. M. Fisk, A. Lundbäck, J. Edberg, and J.M. Zhou: Finite Elem. Anal. Des., 2016, vol. 120, pp. 92–101.10.1016/j.finel.2016.07.007 ↗
24. V. Kalhori, D. Wedberg, and L.E. Lindgren: Int. J. Mater. Form., 2010, vol. 3, pp. 511–14.10.1007/s12289-010-0819-8 ↗
25. D. Wedberg, A. Svoboda, and L.E. Lindgren: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, 085006.10.1088/0965-0393/20/8/085006 ↗
26. L.M. Camus and G. Engberg: High Temp. Mater. Process., 1990, vol. 9, pp. 27–38.10.1515/HTMP.1990.9.1.27 ↗
27. M. Fisk, J.C. Ion, and L.E. Lindgren: Comput. Mater. Sci., 2014, vol. 82, pp. 531–39.10.1016/j.commatsci.2013.10.007 ↗
28. A. Malmelöv, M. Fisk, A. Lundbäck, and L. Lindgren: Materials (Basel).
29. E. Orowan: Zeitschrift für Phys., 1934, vol. 89, pp. 605–13.10.1007/BF01341478 ↗
30. M. Polanyi: Zeitschrift für Phys., 1934, vol. 89, pp. 660–64.10.1007/BF01341481 ↗
31. G.I. Taylor: Proc. R. Soc. London A, 1934, vol. 145, pp. 362–87.10.1098/rspa.1934.0106 ↗
32. A. Seeger, J. Diehl, S. Mader, and H. Rebstock: Philos. Mag., 1957, vol. 2, pp. 323–50.10.1080/14786435708243823 ↗
33. J.S. Langer:
34. G.I. Taylor: Proc. R. Soc. London A, 1934, vol. 145, pp. 388–404.10.1098/rspa.1934.0107 ↗
35. M. Fukuhara and A. Sanpei: J. Mater. Sci. Lett. 1993 1214, 1993, vol. 12, pp. 1122–24.10.1007/BF00420541 ↗
36. L.E. Lindgren, Q. Hao, and D. Wedberg: Mech. Mater., 2017, vol. 108, pp. 68–76.10.1016/j.mechmat.2017.03.007 ↗
37. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps—The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Oxford, 1982.
38. A.H. Cottrell: Prog. Met. Phys., 1953, vol. 4, pp. 205–64.10.1016/0502-8205(53)90018-5 ↗
39. G.W. Ardley and A.H. Cottrell: Proc. R. Soc. Lond. A, 1953, vol. 219, pp. 328–41.10.1098/rspa.1953.0150 ↗
40. A. Van Den Beukel and U.F. Kocks: Acta Metall., 1982, vol. 30, pp. 1027–034.10.1016/0001-6160(82)90211-5 ↗
41. J. Cheng, S. Nemat-Nasser, and W. Guo: Mech. Mater., 2001, vol. 33, pp. 603–16.10.1016/S0167-6636(01)00076-X ↗
42. A.H. Cottrell and B.A. Bilby: Proc. Phys. Soc. Sect. A, 1949, vol. 62, pp. 49–62.10.1088/0370-1298/62/1/308 ↗
43. G. Schoeck: in Multiscale Phenomena in Plasticity: From Experiments to Phenomenology, Modelling and Materials Engineering, Springer Netherlands, 2000, pp. 33–56.10.1007/978-94-011-4048-5_4 ↗
44. A.S. Agazhanov, D.A. Samoshkin, and Y.M. Kozlovskii: J. Phys. Conf. Ser. https://doi.org/10.1088/1742-6596/1382/1/012175.10.1088/1742-6596/1382/1/012175 ↗
45. M. Militzer, W.P. Sun, and J.J. Jonas: Acta Metall. Mater., 1994, vol. 42, pp. 133–41.10.1016/0956-7151(94)90056-6 ↗
46. C. Varvenne, G.P.M. Leyson, M. Ghazisaeidi, and W.A. Curtin: Acta Mater., 2017, vol. 124, pp. 660–83.10.1016/j.actamat.2016.09.046 ↗
47. G.P.M. Leyson, L.G. Hector, and W.A. Curtin: Acta Mater., 2012, vol. 60, pp. 3873–884.10.1016/j.actamat.2012.03.037 ↗
48. G.P.M. Leyson and W.A. Curtin: Model. Simul. Mater. Sci. Eng., 2016, vol. 24, 065005.10.1088/0965-0393/24/6/065005 ↗
49. R. Labusch: Phys. Status Solidi, 1970, vol. 41, pp. 659–69.10.1002/pssb.19700410221 ↗
50. A. Argon: Strengthening Mechanisms in Crystal Plasticity, Oxford University Press, Oxford, 2007.10.1093/acprof:oso/9780198516002.001.0001 ↗
51. R.L. Fleischer: Acta Metall., 1963, vol. 11, pp. 203–09.10.1016/0001-6160(63)90213-X ↗
52. Y. Mishima, S. Ochiai, N. Hamao, M. Yodogawa, and T. Suzuki: Trans. Japan Inst. Met., 1986, vol. 27, pp. 648–55.10.2320/matertrans1960.27.648 ↗
53. H. Kou, W. Li, J. Ma, J. Shao, Y. Tao, X. Zhang, P. Geng, Y. Deng, Y. Li, X. Zhang, and F. Peng: Int. J. Mech. Sci., 2018, vol. 140, pp. 83–92.10.1016/j.ijmecsci.2018.02.042 ↗
54. R. Kapoor and S. Nemat-Nasser: Mech. Mater., 1998, vol. 27, pp. 1–2.10.1016/S0167-6636(97)00036-7 ↗
55. D.L. Holt: J. Appl. Phys., 1970, vol. 41, pp. 3197–201.10.1063/1.1659399 ↗
56. E.I. Galindo-Nava and P.E.J. Rivera-Dìaz-Del-Castillo: Int. J. Plast., 2013, vol. 47, pp. 202–21.10.1016/j.ijplas.2013.02.002 ↗
57. S. Azadian: Luleå University of Technology, 2004.
58. M.A. Moretti, B. Dalai, P. Åkerström, C. Arvieu, D. Jacquin, E. Lacoste, and L.-E. Lindgren: Metall. Mater. Trans. A, 2021, pp. 1–15.
59. C.L. Hale, W.S. Rollings, and M.L. Weaver: Mater. Sci. Eng. A, 2001, vol. 300, pp. 153–64.10.1016/S0921-5093(00)01470-2 ↗
60. S.A. Nalawade, M. Sundararaman, R. Kishore, and J.G. Shah: Scr. Mater., 2008, vol. 59, pp. 991–94.10.1016/j.scriptamat.2008.07.004 ↗
61. M.C. Rezende, L.S. Araújo, S.B. Gabriel, J. Dille, and L.H. De Almeida: J. Alloys Compd., 2015, vol. 643, pp. S256–59.10.1016/j.jallcom.2014.12.279 ↗
62. G.Z. Voyiadjis and Y. Song: Acta Mech., 2020, vol. 231, pp. 19–34.10.1007/s00707-019-02508-6 ↗
63. K. Yuan, W. Guo, P. Li, J. Wang, Y. Su, X. Lin, and Y. Li: Mater. Sci. Eng. A, 2018, vol. 721, pp. 215–25.10.1016/j.msea.2018.02.014 ↗
64. M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, and J. Calvo: Mater. Des., 2016, vol. 94, pp. 28–38.10.1016/j.matdes.2015.12.157 ↗
65. M. Azarbarmas, M. Aghaie-Khafri, J.M. Cabrera, and J. Calvo: Mater. Sci. Eng. A, 2016, vol. 678, pp. 137–52.10.1016/j.msea.2016.09.100 ↗
66. Y. Wang, W.Z. Shao, L. Zhen, L. Yang, and X.M. Zhang: Mater. Sci. Eng. A, 2008, vol. 497, pp. 479–86.10.1016/j.msea.2008.07.046 ↗
67. F. Montheillet and J.-P. Thomas: in Metallic Materials with High Structural Efficiency, O.N. Senkov, D.B. Miracle, and S.A. Firstov, eds., Kluwer Academic Publishers, Dordrecht, 2004, pp. 357–68.
68. F.L. Sui, L.X. Xu, L.Q. Chen, and X.H. Liu: J. Mater. Process. Technol., 2011, vol. 211, pp. 433–40.10.1016/j.jmatprotec.2010.10.015 ↗
69. Y.B. Tan, Y.H. Ma, and F. Zhao: J. Alloys Compd., 2018, vol. 741, pp. 85–96.10.1016/j.jallcom.2017.12.265 ↗
70. F. Chen, J. Liu, H. Ou, B. Lu, Z. Cui, and H. Long: Mater. Sci. Eng. A, 2015, vol. 642, pp. 279–87.10.1016/j.msea.2015.06.093 ↗
71. J.P. Thomas, E. Bauchet, C. Dumont, and F. Montheillet: in Proceedings of the International Symposium on Superalloys, 2004.
72. A. Akhtar and E. Teghtsoonian: Metall. Trans., 1971, vol. 2, pp. 2757–63.10.1007/BF02813249 ↗
73. Y. Mishima, S. Ochiai, and T. Suzuki: Acta Metall., 1985, vol. 33, pp. 1161–69.10.1016/0001-6160(85)90211-1 ↗
74. L. Karmazin: Czechoslov. J. Phys. 1979, vol. 29.10.1007/BF01596117 ↗
75. Y. Mishima, S. Ochiai, N. Hamao, M. Yodogawa, and T. Suzuki: Trans. Jpn. Inst. Met., 1986, vol. 27, pp. 656–64.10.2320/matertrans1960.27.656 ↗
76. A.S. Argon: Physical Metallurgy, Elsevier, Amsterdam, 1996, pp. 1877–955.10.1016/B978-044489875-3/50026-0 ↗
77. A.S. Argon: Scr. Metall., 1970, vol. 4, pp. 1001–1004.10.1016/0036-9748(70)90048-7 ↗
78. W.P. Kuykendall, Y. Wang, and W. Cai: J. Mech. Phys. Solids, 2020, vol. 144, 104105.10.1016/j.jmps.2020.104105 ↗
79. L.P. Kubin, G. Canova, M. Condat, B. Devincre, V. Pontikis, and Y. Bréchet: Solid State Phenom., 1992, vol. 23–24, pp. 455–72.10.4028/www.scientific.net/SSP.23-24.455 ↗
80. A. Malka-Markovitz and D. Mordehai: Philos. Mag., 2018, vol. 98, pp. 347–70.10.1080/14786435.2017.1406194 ↗
81. M.J. Sohrabi and H. Mirzadeh: Vacuum. https://doi.org/10.1016/j.vacuum.2019.108875.10.1016/j.vacuum.2019.108875 ↗
82. M.J. Sohrabi and H. Mirzadeh: Met. Mater. Int., 2020, vol. 26, pp. 326–32.10.1007/s12540-019-00342-y ↗
83. D. Connétable, B. Ter-Ovanessian, and É. Andrieu: J. Phys. Condens. Matter, 2012, vol. 24, pp. 1–5.10.1088/0953-8984/24/9/095010 ↗
84. Y. Han and M.C. Chaturvedi: Mater. Sci. Eng., 1987, vol. 85, pp. 59–65.10.1016/0025-5416(87)90467-8 ↗
85. X. Feaugas and H. Haddou: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2329–40.10.1007/s11661-003-0296-5 ↗
86. M. Sundararaman, P. Mukhopadhyay, and S. Banerjee: Acta Metall., 1988, vol. 36, pp. 847–64.10.1016/0001-6160(88)90139-3 ↗
87. Phonon density of states of the Debye model. https://lampx.tugraz.at/~hadley/ss1/phonons/table/dosdebye.html. Accessed 22 Apr 2022.
88. Special Metals Corporation - Inconel alloy 718. https://www.specialmetals.com/documents/technical-bulletins/inconel/inconel-alloy-718.pdf. Accessed 27 Nov 2018.