Influence of Ni and Process Parameters in Medium Mn Steels Heat Treated by High Partitioning Temperature Q&P Cycles
Source abstract
Abstract
Abstract In this work, two medium Mn steels (5.8 and 5.7 wt pct Mn) were subjected to a quenching and partitioning (Q&P) treatment employing a partitioning temperature which corresponded to the start of austenite reverse transformation (ART). The influence of a 1.6 wt pct Ni addition in one of the steels and cycle parameters on austenite stability and mechanical properties was also studied. High contents of retained austenite were obtained in the lower quenching temperature (QT) condition, which at the same time resulted in a finer microstructure. The addition of Ni was effective in stabilizing higher contents of austenite. The partitioning of Mn and Ni from martensite into austenite was observed by TEM–EDS. The partitioning behaviour of Mn depended on the QT condition. The lower QT condition facilitated Mn enrichment of austenite laths during partitioning and stabilization of a higher content of austenite. The medium Mn steel containing Ni showed outstanding values of the product of tensile strength (TS) and total elongation (TEL) in the lower QT condition and a higher mechanical stability of the austenite.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Shape Memory Alloy Transformations
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (63)
Show source-provided references
1. J. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51, pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
2. N. Fonstein: Advanced High Strength Sheet Steels, Springer, Cham, 2015.10.1007/978-3-319-19165-2 ↗
3. J. Mola and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 946–67.10.1007/s11661-012-1420-1 ↗
4. M.J. Santofimia, L. Zhao, R. Petrov, C. Kwakernaak, W.G. Sloof, and J. Sietsma: Acta Mater., 2011, vol. 59, pp. 6059–68.10.1016/j.actamat.2011.06.014 ↗
5. E. De Moor, J.G. Speer, D.K. Matlock, J.H. Kwak, and S.B. Lee: ISIJ Int., 2011, vol. 51, pp. 137–44.10.2355/isijinternational.51.137 ↗
6. M.J. Merwin: Proc. AIST Steel Prop. Appl. Conf., Detroit, 2007, pp. 67–84.
7. R.L. Miller: Metall. Trans., 1972, vol. 3, pp. 905–12.10.1007/BF02647665 ↗
8. T. Furukawa: Mater. Sci. Technol. (U.K.), 1989, vol. 5, pp. 465–70.10.1179/mst.1989.5.5.465 ↗
9. P.J. Gibbs, E. De Moor, M.J. Merwin, J.G. Speer, and D.K. Matlock: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3691–3702.10.1007/s11661-011-0687-y ↗
10. A. Arlazarov, M. Gouné, O. Bouaziz, A. Hazotte, G. Petitgand, and P. Barges: Mater. Sci. Eng. A, 2012, vol. 542, pp. 31–39.10.1016/j.msea.2012.02.024 ↗
11. D.E. Kim, Y.K. Park, O.Y. Lee, K.G. Jin, and S.J. Kim: Korean J. Mater. Res., 2005, vol. 15, pp. 115–20.10.3740/MRSK.2005.15.2.115 ↗
12. J. Shi, X. Sun, M. Wang, W. Hui, H. Dong, and W. Cao: Scripta Mater., 2010, vol. 63, pp. 815–18.10.1016/j.scriptamat.2010.06.023 ↗
13. A. Bhattacharya, P.K. Bokinala, R. Mitra, and D. Chakrabarti: Mater. Sci. Technol. (U.K.), 2019, vol. 35, pp. 55–67.10.1080/02670836.2018.1537609 ↗
14. P.J. Du, D.P. Yang, M.K. Bai, X.C. Xiong, D. Wu, G.D. Wang, and H.L. Yi: Mater. Sci. Technol. (U.K.), 2019, vol. 35, pp. 2084–91.10.1080/02670836.2019.1572316 ↗
15. J.G. Speer, R.E. Hackenberg, B.C. Decooman, and D.K. Matlock: Philos. Mag. Lett., 2007, vol. 87, pp. 379–82.10.1080/09500830701194173 ↗
16. G.A. Thomas and J.G. Speer: Mater. Sci. Technol. (U.K.), 2014, vol. 30, pp. 998–1007.10.1179/1743284714Y.0000000546 ↗
17. D. De Knijf, M.J. Santofimia, H. Shi, V. Bliznuk, C. Föjer, R. Petrov, and W. Xu: Acta Mater., 2015, vol. 90, pp. 161–68.10.1016/j.actamat.2015.02.040 ↗
18. E.J. Seo, L. Cho, and B.C. De Cooman: Acta Mater., 2016, vol. 107, pp. 354–65.10.1016/j.actamat.2016.01.059 ↗
19. S. Ayenampudi, C. Celada-Casero, J. Sietsma, and M.J. Santofimia: Materialia, 2019, vol. 8, 100492.10.1016/j.mtla.2019.100492 ↗
20. M. Arribas, T. Gutiérrez, E. Del Molino, A. Arlazarov, I. De Diego-Calderón, D. Martin, D. De Caro, S. Ayenampudi, and M.J. Santofimia: Metals, 2020, vol. 10, p. 862.10.3390/met10070862 ↗
21. R. Ding, Z. Dai, M. Huang, Z. Yang, C. Zhang, and H. Chen: Acta Mater., 2018, vol. 147, pp. 59–69.10.1016/j.actamat.2018.01.009 ↗
22. S. Ayenampudi, Z. Arechabaleta, and M. Arribas: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 5–11.
23. E. Del Molino, T. Gutierrez, M. Serna-Ruiz, M. Arribas, and A. Arlazarov: Mater. Sci. Forum, 2021, vol. 1016, pp. 379–84.10.4028/www.scientific.net/MSF.1016.379 ↗
24. K. Kim and S.J. Lee: Mater. Sci. Eng. A, 2017, vol. 698, pp. 183–90.10.1016/j.msea.2017.05.030 ↗
25. E. De Moor, P.J. Gibbs, J.G. Speer, D.K. Matlock, and J.G. Schroth: Iron Steel Technol., 2010, vol. 7, pp. 133–44.
26. J.G. Speer, F.C. Rizzo Assunção, D.K. Matlock, and D.V. Edmonds: Mater. Res., 2005, vol. 8, pp. 417–23.10.1590/S1516-14392005000400010 ↗
27. D.V. Edmonds, K. He, F.C. Rizzo, B.C. De Cooman, D.K. Matlock, and J.G. Speer: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 25–34.10.1016/j.msea.2006.02.133 ↗
28. S. Suwas and R.K. Ray: Crystallographic Texture of Materials, Springer, London, 2014.10.1007/978-1-4471-6314-5 ↗
29. T. Tsuchiyama, T. Sakamoto, S. Tanaka, and T. Masumura: ISIJ Int., 2020, vol. 60, pp. 2954–62.10.2355/isijinternational.ISIJINT-2020-164 ↗
30. L. Liu, B.B. He, G.J. Cheng, H.W. Yen, and M.X. Huang: Scripta Mater., 2018, vol. 150, pp. 1–6.10.1016/j.scriptamat.2018.02.035 ↗
31. B.C. De Cooman, S. Lee, and S.S. Kumar: Proc. 2nd Int. Conf. “Super-High Strength Steels”, Italy, 2010, pp. 1–11.
32. S. Lee and B.C. De Cooman: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 5018–24.10.1007/s11661-013-1860-2 ↗
33. E. De Moor, S. Kang, J.G. Speer, and D.K. Matlock: Proc. Int. Conf. Min. Mater. Metall. Eng., 2014, pp. 1–7.
34. K.W. Andrews: J. Iron Steel Inst., 1965, vol. 203, pp. 721–27.
35. D.P. Koistinen and R.E. Marburger: Acta Metall., 1959, vol. 7, pp. 59–60.10.1016/0001-6160(59)90170-1 ↗
36. M.J. Santofimia, J.G. Speer, A.J. Clarke, L. Zhao, and J. Sietsma: Acta Mater., 2009, vol. 57, pp. 4548–57.10.1016/j.actamat.2009.06.024 ↗
37. A. Arlazarov, M. Gouné, O. Bouaziz, and A. Hazotte: Philos. Mag. Lett., 2017, vol. 97, pp. 125–31.10.1080/09500839.2017.1290293 ↗
38. R. Wei, M. Enomoto, R. Hadian, H.S. Zurob, and G.R. Purdy: Acta Mater., 2013, vol. 61, pp. 697–707.10.1016/j.actamat.2012.10.019 ↗
39. T. Shinozaki, Y. Tomota, T. Fukino, and T. Suzuki: ISIJ Int., 2017, vol. 57, pp. 533–39.10.2355/isijinternational.ISIJINT-2016-557 ↗
40. D.T. Pierce, D.R. Coughlin, K.D. Clarke, E. De Moor, J. Poplawsky, D.L. Williamson, B. Mazumder, J.G. Speer, A. Hood, and A.J. Clarke: Acta Mater., 2018, vol. 151, pp. 454–69.10.1016/j.actamat.2018.03.007 ↗
41. A.J. Clarke, M.K. Miller, R.D. Field, D.R. Coughlin, P.J. Gibbs, K.D. Clarke, D.J. Alexander, K.A. Powers, P.A. Papin, and G. Krauss: Acta Mater., 2014, vol. 77, pp. 17–27.10.1016/j.actamat.2014.05.032 ↗
42. S. Yan, X. Liu, W.J. Liu, H. Lan, and H. Wu: Mater. Sci. Eng. A, 2014, vol. 620, pp. 58–66.10.1016/j.msea.2014.09.047 ↗
43. F. HajyAkbary, J. Sietsma, G. Miyamoto, T. Furuhara, and M.J. Santofimia: Acta Mater., 2016, vol. 104, pp. 72–83.10.1016/j.actamat.2015.11.032 ↗
44. F. HajyAkbary, J. Sietsma, G. Miyamoto, N. Kamikawa, R.H. Petrov, T. Furuhara, and M.J. Santofimia: Mater. Sci. Eng. A, 2016, vol. 677, pp. 505–14.10.1016/j.msea.2016.09.087 ↗
45. J.J. Mueller, X. Hu, X. Sun, Y. Ren, K. Choi, E. Barker, J.G. Speer, D.K. Matlock, and E. De Moor: Mater. Des., 2021, vol. 203, 109598.10.1016/j.matdes.2021.109598 ↗
46. H.R. Ghazvinloo, A. Honarbakhsh-Raouf, and E. Borhani: Metallurgist, 2016, vol. 60, pp. 758–64.10.1007/s11015-016-0363-y ↗
47. H. Luo, J. Liu, and H. Dong: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 3119–24.10.1007/s11661-016-3448-0 ↗
48. Z.J. Xie, G. Han, Y.S. Yu, C.J. Shang, and R.D.K. Misra: Mater. Charact., 2019, vol. 153, pp. 208–14.10.1016/j.matchar.2019.05.010 ↗
49. J. Teixeira, M. Moreno, S.Y.P. Allain, C. Oberbillig, G. Geandier, and F. Bonnet: Acta Mater., 2021, vol. 212, 116920.10.1016/j.actamat.2021.116920 ↗
50. F. Huyan, J.Y. Yan, L. Höglund, J. Ågren, and A. Borgenstam: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 1053–60.10.1007/s11661-018-4497-3 ↗
51. A. Borgenstam, A. Engstro, L. Ho, and J.A. Gren: J. Phase Equilib., 2000, vol. 21, pp. 269–80.10.1361/105497100770340057 ↗
52. C.A. Apple, R.N. Caron, and G. Krauss: Metall. Trans., 1974, vol. 5, pp. 593–99.10.1007/BF02644654 ↗
53. T. Swarr and G. Krauss: Metall. Trans. A, 1976, vol. 7, pp. 41–48.10.1007/BF02644037 ↗
54. A.J. Clarke: Ph.D. Thesis, Colorado School of Mines, Golden, CO, 2006.
55. N. Yan, H. Di, R.D.K. Misra, H. Huang, and Y. Li: Mater. Sci. Eng. A, 2019, vol. 753, pp. 11–21.10.1016/j.msea.2019.01.026 ↗
56. H. Luo, J. Shi, C. Wang, W. Cao, X. Sun, and H. Dong: Acta Mater., 2011, vol. 59, pp. 4002–14.10.1016/j.actamat.2011.03.025 ↗
57. O. Dmitrieva, D. Ponge, G. Inden, J. Millán, P. Choi, J. Sietsma, and D. Raabe: Acta Mater., 2011, vol. 59, pp. 364–74.10.1016/j.actamat.2010.09.042 ↗
58. P. Gao, W. Chen, F. Li, B. Ning, and Z. Zhao: Acta Metall. Sin. (Engl. Lett.), 2020.
59. D. Raabe, B. Sun, A.K. Da Silva, B. Gault, H.-W. Yen, K. Sedighiani, P.T. Sukumar, I.R. Souza Filho, S. Katnagallu, E. Jägle, P. Kürnsteiner, N. Kusampudi, L. Stephenson, M. Herbig, C.H. Liebscher, H. Springer, S. Zaefferer, V. Shah, S.-L. Wong, C. Baron, M. Diehl, F. Roters, and D. Ponge: Metall. Mater. Trans. A, 2020, vol. 51, pp. 5517–86.10.1007/s11661-020-05947-2 ↗
60. J. Hidalgo, R.M. Huizenga, K.O. Findley, and M.J. Santofimia: Mater. Sci. Eng. A, 2019, vol. 745, pp. 185–94.10.1016/j.msea.2018.12.096 ↗
61. J. Nishikawa, T. Maki, and S. Morito: ISIJ Int., 2003, vol. 43, pp. 1475–77.10.2355/isijinternational.43.1475 ↗
62. J. Galán, L. Samek, P. Verleysen, K. Verbeken, and Y. Houbaert: Rev. Metal., 2012, vol. 48, pp. 118–31.10.3989/revmetalm.1158 ↗
63. J. Zhao, Z. Jiang, and C.S. Lee: Mater. Sci. Eng. A, 2013, vol. 562, pp. 144–51.10.1016/j.msea.2012.11.006 ↗