journal article·2022-05

High-Temperature Cycle Deformation and Fracture Behavior of Advanced Austenitic Heat-Resistant Steel Sanicro25 Alloy for A-USC Power Plants

Dechao Lyu, Tieshan Cao, Tongtong Zhou, Congqian Cheng, Jie Zhao

Publisher page

Abstract

Cyclic deformation mechanism and fracture characteristics for Sanicro25 alloy were investigated at temperatures and mean stresses ranging from 973 K to 1023 K and 130 to 260 MPa with stress amplitudes between 70 and 130 MPa. The results demonstrated that the increase of mean stress and stress amplitude increased the cyclic strain rate and reduced the fracture life. The minimum strain rate and mean stress were found to follow the power-law relationship and the similar values of apparent stress exponent ((n_{ ext{a}} =) 6.5 to 10.4 at ( sigma_{ ext{a}} = 70, { ext{MPa}}) and (n_{ ext{a}} =) 6.0 to 9.2 at ( sigma_{ ext{a}} = 130 , { ext{MPa}})) showed the parallel trend at different stress amplitudes. The average values of apparent activation energy were (593.6) and (689.5) kJ/mol and were found to increase with increasing stress amplitude. The threshold stresses were estimated by a linear extrapolation method and decreased with increasing temperature and stress amplitude. By invoking the concept of threshold stresses, the normalization of cyclic strain rate can be achieved with a true stress exponent of 5. Moreover, the value of the true activation energy (Q = 270 { ext{kJ}}/{ ext{mol}}) was equal to the lattice self-diffusion of γ-Fe, implying that the cyclic strain process was controlled by the lattice self-diffusion. As for the correlation of ruptured life, a damage accumulated strain ((varepsilon_{ ext{d}})) was proposed to make a modified Monkman–Grant equation ( left( {dot{varepsilon }_{ ext{min}}^{{alphaprime}}cdot frac{tr}{{varepsilon_{ ext{d}} }} = C_{ ext{MMG}} } ight) ) and all data can be normalized into a narrow band under different loading conditions.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (50)

Show source-provided references
1. P.S. Weitzel and Asme: ASME 2011 Power Conference 2011, pp. 281–91.
2. F. Sun, Y.F. Gu, J.B. Yan, Z.H. Zhong, and M. Yuyama: Acta Mater., 2016, vol. 102, pp. 70–78.10.1016/j.actamat.2015.09.006 ↗
3. Y. Yuan, Z.H. Zhong, Z.S. Yu, H.F. Yin, Y.Y. Dang, X.B. Zhao, Z. Yang, J.T. Lu, J.B. Yan, and Y. Gu: Mater. Sci. Eng. A, 2014, vol. 619, pp. 364–69.10.1016/j.msea.2014.09.095 ↗
4. Z.H. Zhong, Y.F. Gu, Y. Yuan, and Z. Shi: Mater. Lett., 2013, vol. 109, pp. 38–41.10.1016/j.matlet.2013.07.060 ↗
5. J. Polak, R. Petras, M. Heczko, I. Kubena, T. Kruml, and G. Chai: Mater. Sci. Eng. A, 2014, vol. 615, pp. 175–82.10.1016/j.msea.2014.07.075 ↗
6. B. Rutkowski, A. Gil, and A. Czyrska-Filemonowicz: Corros. Sci., 2016, vol. 102, pp. 373–83.10.1016/j.corsci.2015.10.030 ↗
7. P.A. Korzhavyi and R. Sandstrom: Mater. Sci. Eng. A, 2015, vol. 626, pp. 213–19.10.1016/j.msea.2014.12.057 ↗
8. G. Chai, J-O. Nilsson, M. Bostrom, J. Hogberg and U. Forsberg: in 1st International Conference on Advanced Steels (ICAS 2010), (Chinese Soc Met, Guilin, PEOPLES R CHINA, 2010), pp 385–97.10.1007/978-3-642-17665-4_40 ↗
9. G. Chai and U. Forsberg: Materials for Ultra-Supercritical and Advanced Ultra-Supercritical Power Plants, Woodhead Publishing, 2017, pp. 391–421.10.1016/B978-0-08-100552-1.00012-9 ↗
10. Y. Zhang, H. Jing, L. Xu, L. Zhao, Y. Han, and J. Liang: Mater. Charact., 2017, vol. 130, pp. 156–72.10.1016/j.matchar.2017.05.037 ↗
11. A.S. Alomari, N. Kumar, and K.L. Murty: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 641–54.10.1007/s11661-018-5044-y ↗
12. H. Sun, H. Wang, X. He, F. Wang, X. An, and Z. Wang: Mater. Sci. Eng. A, 2021, vol. 802, p. 140688.10.1016/j.msea.2020.140688 ↗
13. G.-Q. Li, X.-X. Wang, C. Zhang, and W.-Y. Cai: J. Constr. Steel Res., 2020, vol. 168, p. 105989.10.1016/j.jcsr.2020.105989 ↗
14. G.-Q. Li and C. Zhang: J. Constr. Steel Res., 2012, vol. 71, pp. 182–88.10.1016/j.jcsr.2011.09.006 ↗
15. J. Suo, Z. Peng, H. Yang, G. Chai, and M. Yu: Metallogr. Microstruct. Anal, 2019, vol. 8, pp. 281–86.10.1007/s13632-019-00529-0 ↗
16. Y. Zhang, H. Jing, L. Xu, L. Zhao, Y. Han, and Y. Zhao: Mater. Sci. Eng. A, 2017, vol. 686, pp. 102–12.10.1016/j.msea.2017.01.002 ↗
17. H. Li, H. Jing, L. Xu, Y. Han, L. Zhao, J. Rong, Z. Tang, B. Xiao, Y. Zhang, Z. Luo, and D. Wu: Int. J. Plast., 2019, vol. 116, pp. 91–117.10.1016/j.ijplas.2018.12.010 ↗
18. H. Li, H. Jing, L. Xu, Y. Han, L. Zhao, Z. Tang, B. Xiao, and Y. Zhang: Int. J. Plast., 2019, vol. 118, pp. 105–29.10.1016/j.ijplas.2019.02.006 ↗
19. H. Li, H. Jing, L. Xu, L. Zhao, Y. Han, Z. Tang, B. Xiao, and Y. Zhang: Int. J. Fatigue, 2019, vol. 119, pp. 20–33.10.1016/j.ijfatigue.2018.09.026 ↗
20. H. Wärner, J. Xu, G. Chai, J. Moverare, and M. Calmunger: Int. J. Fatigue, 2021, vol. 143, p. 105990.10.1016/j.ijfatigue.2020.105990 ↗
21. J. Polák, R. Petráš, M. Heczko, T. Kruml, and G. Chai: Int. J. Fatigue, 2016, vol. 83, pp. 75–83.10.1016/j.ijfatigue.2015.03.015 ↗
22. S. Ukai, S. Kato, T. Furukawa, and S. Ohtsuka: Mater. Sci. Eng. A, 2020, vol. 794, p. 139863.10.1016/j.msea.2020.139863 ↗
23. S.L. Mannan and M. Valsan: Int. J. Mech. Sci, 2006, vol. 48, pp. 160–75.10.1016/j.ijmecsci.2005.08.004 ↗
24. L. Shen, M. Ding, C. Feng, B. Yang, M. Elchalakani, and L. Song: J. Constr. Steel Res., 2021, vol. 181, p. 106620.10.1016/j.jcsr.2021.106620 ↗
25. A. Nath, S.V. Barai, and K.K. Ray: J. Constr. Steel Res., 2021, vol. 182, p. 106652.10.1016/j.jcsr.2021.106652 ↗
26. N.-K. Cho, R.-Z. Wang, Z. Ma, H. Chen, and F.-Z. Xuan: Int. J. Mech. Sci, 2019, vol. 161–162, p. 105048.10.1016/j.ijmecsci.2019.105048 ↗
27. G.H. Pelissari, D.P. Braga, P.H. Fernandes Oliveira, D.C. Camilo Magalhaes, M. Ferrante, C.A. Della Rovere, A.M. Kliauga, L.O. Bueno, and V.L. Sordi: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4413–23.10.1007/s11661-021-06394-3 ↗
28. K.C. Sahoo, S. Goyal, V. Ganesan, J. Vanaja, G.V. Reddy, P. Padmanabhan, and K. Laha: Mater. High. Temp., 2019, vol. 36, pp. 388–403.10.1080/09603409.2019.1586094 ↗
29. A. Mirzaei, A. Zarei-Hanzaki, N. Haghdadi, and A. Marandi: Mater. Sci. Eng. A, 2014, vol. 589, pp. 76–82.10.1016/j.msea.2013.09.036 ↗
30. J.S. Zhang, P.E. Li, and J.Z. Jin: Acta Metall. Mater., 1991, vol. 39, pp. 3063–70.10.1016/0956-7151(91)90039-4 ↗
31. D.-B. Park, S.-M. Hong, K.-H. Lee, M.-Y. Huh, J.-Y. Suh, S.-C. Lee, and W.-S. Jung: Mater. Charact., 2014, vol. 93, pp. 52–61.10.1016/j.matchar.2014.03.012 ↗
32. T. Shrestha, M. Basirat, I. Charit, G.P. Potirniche, K.K. Rink, and U. Sahaym: J. Nucl. Mater., 2012, vol. 423, pp. 110–19.10.1016/j.jnucmat.2012.01.005 ↗
33. P. Ou, L. Li, X.-F. Xie, and J. Sun: Acta. Metall. Sin-Engl., 2015, vol. 28, pp. 1336–43.10.1007/s40195-015-0331-8 ↗
34. S. Latha, M.D. Mathew, P. Parameswaran, K.B.S. Rao, and S.L. Mannan: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5167–74.10.1016/j.msea.2010.04.043 ↗
35. K.L. Murty, F.A. Mohamed, and J.E. Dorn: Acta. Mater., 1972, vol. 20, pp. 1009–18.10.1016/0001-6160(72)90135-6 ↗
36. K.L. Murty, G. Dentel, and J. Britt: Mater. Sci. Eng. A, 2005, vol. 410, pp. 28–31.10.1016/j.msea.2005.08.006 ↗
37. J.S. Zhang: Science Press, 2010.
38. N.Q. Vo, D. Bayansan, A. Sanaty-Zadeh, E.H. Ramos, and D.C. Dunand: Materialia, 2018, vol. 4, pp. 65–69.10.1016/j.mtla.2018.08.030 ↗
39. Y. Li and F.A. Mohamed: Acta Mater., 1997, vol. 45, pp. 4775–85.10.1016/S1359-6454(97)00130-4 ↗
40. S. Bagui, B.P. Sahu, K. Laha, S. Tarafder, and R. Mitra: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 94–107.10.1007/s11661-020-06066-8 ↗
41. K. Maruyama: in Creep-Resistant Steels, F. Abe, K. Torsten-Ulf and R. Viswanathan, eds., Woodhead Publishing, 2008, pp. 350–64.10.1533/9781845694012.2.350 ↗
42. D. G. Morris: in Nanostructured Metals and Alloys, S. H. Whang, ed., Woodhead Publishing, 2011, pp. 299–328.10.1533/9780857091123.3.299 ↗
43. D.G. Morris and D.R. Harries: Met. Sci., 1978, vol. 12, pp. 525–31.10.1179/msc.1978.12.11.525 ↗
44. C.Y. Wang, C.M. Cepeda-Jimenez, and M.T. Perez-Prado: Acta Mater., 2020, vol. 194, pp. 190–206.10.1016/j.actamat.2020.04.055 ↗
45. E. Arzt and M.F. Ashby: Scripta Mater., 1982, vol. 16, pp. 1285–90.10.1016/0036-9748(82)90484-7 ↗
46. M. F. Ashby and B. F. Dyson: Advances in Fracture Research (Fracture 84). Proceedings of the 6th International Conference on Fracture (ICG6), vol.1, 1984, pp. 3–30.10.1016/B978-1-4832-8440-8.50017-X ↗
47. G. Sundararajan: Mater. Sci. Eng. A, 1989, vol. 112, pp. 205–14.10.1016/0921-5093(89)90360-2 ↗
48. F.C. Monkman and N.J. Grant: Proc ASTM, 1956, vol. 56, pp. 593–615.
49. H.K. Yadav, A.R. Ballal, M.M. Thawre, and V.D. Vijayanand: Mater. Res. Express., 2020, vol. 7, p. 016580.10.1088/2053-1591/ab6ad9 ↗
50. V.M. Radhakrishnan: J. Mater. Eng. Perform., 1992, vol. 1, pp. 123–28.10.1007/BF02650043 ↗