Effect of Prior Deformation Above Md Temperature on Tensile Properties of Type 304 Metastable Austenitic Stainless Steel
Source abstract
Abstract
In this study, room temperature tensile properties of type 304, a metastable austenitic stainless steel, prior rolled above Md temperature (200 °C and 300 °C) are compared with mill-annealed and material prior rolled at room temperature (25 °C). Strain-induced martensite that formed during the tensile tests, followed using in-situ using magnetic measurements, display kinetics that vary with prior deformation temperature and strain. Scanning Electron Microscopy and Electron Backscattered Diffraction studies provided direct evidence for shear band formation during prior deformation. Kinetics of strain-induced martensite is found to fit the Olson–Cohen equation modified to include the prior deformation strain and martensite formed during prior deformation. The systematic changes observed in the model parameters of the modified Olson–Cohen equation are explained. The strain hardening in the material is analyzed and correlated with changes in the rate of formation of strain-induced martensite with respect to strain.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. X. Hao, P. Li, Y. Xia, H. Dong, P. Wang, and D. Yan: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 688–703.10.1007/s11661-018-5031-3 ↗
2. C.C. Chen, D.Y. Cho, C.S. Chang, J.T. Chen, W.Y. Lee, and H.C. Lee: J. Clin. Neurosci., 2005, vol. 12, pp. 937–40.10.1016/j.jocn.2005.04.006 ↗
3. P.L. Andresen, P.H. Chou, M.M. Morra, J. Lawrence Nelson, and R.B. Rebak: in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 40, Springer, Boston, 2009, pp. 2824–36.10.1007/s11661-009-9960-8 ↗
4. A.W. Webb, D.U. Gubser, and L.C. Towle: Rev. Sci. Instrum., 1976, vol. 47, pp. 59–62.10.1063/1.1134491 ↗
5. A. Amininejad, R. Jamaati, and S.J. Hosseinipour: Mater. Sci. Eng. A., 2019, vol. 767, p. 138433.10.1016/j.msea.2019.138433 ↗
6. P. Mallick, N.K. Tewary, S.K. Ghosh, and P.P. Chattopadhyay: Mater. Charact., 2017, vol. 133, pp. 77–86.10.1016/j.matchar.2017.09.027 ↗
7. C. Zheng, H. Jiang, X. Hao, J. Ye, L. Li, and D. Li: Mater. Sci. Eng. A., 2019, vol. 746, pp. 332–40.10.1016/j.msea.2019.01.038 ↗
8. D. Xu, X. Wan, J. Yu, G. Xu, and G. Li: Metals., 2018, vol. 8, pp. 1–14.
9. J. Liu, Y. Jin, X. Fang, C. Chen, Q. Feng, X. Liu, Y. Chen, T. Suo, F. Zhao, T. Huang, H. Wang, X. Wang, Y. Fang, Y. Wei, L. Meng, J. Lu, and W. Yang: Sci. Rep., 2016, vol. 6, pp. 1–15. https://doi.org/10.1038/srep35345.10.1038/srep35345 ↗
10. X. Chen, L. Ma, C. Zhou, Y. Hong, H. Tao, J. Zheng, and L. Zhang: Corros. Sci., 2019, vol. 148, pp. 159–70.10.1016/j.corsci.2018.12.015 ↗
11. T. Balusamy, T.S.N. Sankara Narayanan, K. Ravichandran, I.S. Park, and M.H. Lee: Corros. Sci., 2013, vol. 74, pp. 332–44.10.1016/j.corsci.2013.04.056 ↗
12. X.F. Fang and W. Dahl: Mater. Sci. Eng. A., 1991, vol. 141, pp. 189–98.10.1016/0921-5093(91)90769-J ↗
13. F. Peng, X. Huai Dong, K. Liu, and H. Yang Xie: J. Iron Steel Res. Int., 2015, vol. 22, pp. 931–6.10.1016/S1006-706X(15)30092-3 ↗
14. E. Polatidis, M. Šmíd, W.-N. Hsu, M. Kubenova, J. Capek, T. Panzner, and H. Van Swygenhoven: Mater. Sci. Eng. A., 2019, vol. 764, p. 138222.10.1016/j.msea.2019.138222 ↗
15. G.B. Olson and M. Cohen: Metall. Trans. A., 1975, vol. 6A, pp. 791–5.10.1007/BF02672301 ↗
16. J. Talonen and H. Hänninen: Acta Mater., 2007, vol. 55, pp. 6108–18.10.1016/j.actamat.2007.07.015 ↗
17. T. Iwamoto, T. Tsuta, and Y. Tomita: Int. J. Mech. Sci., 1998, vol. 40, pp. 173–82.10.1016/S0020-7403(97)00047-7 ↗
18. C. Ravishankar and R.K. Kumar: Mech. Adv. Mater. Struct., 2012, vol. 19, pp. 336–49.10.1080/15376494.2010.528162 ↗
19. Z. Qin and Y. Xia: J. Mater. Process. Technol., 2020, vol. 280, p. 116613.10.1016/j.jmatprotec.2020.116613 ↗
20. J.A. Rodríguez-Martínez, R. Pesci, and A. Rusinek: Mater. Sci. Eng. A., 2011, vol. 528, pp. 5974–82.10.1016/j.msea.2011.04.030 ↗
21. J. Talonen, H. Hänninen, P. Nenonen, and G. Pape: Metall. Mater. Trans. A., 2005, vol. 36A, pp. 421–32.10.1007/s11661-005-0313-y ↗
22. N.H. Moser, T.S. Gross, and Y.P. Korkolis: in Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, vol. 45, Springer, Boston, 2014, pp. 4891–96.10.1007/s11661-014-2422-y ↗
23. T. Angel: J. Iron Steel Inst., 1954, vol. 177, pp. 165–74.
24. S. Allain, J.-P. Chateau, O. Bouaziz, S. Migot, and N. Guelton: Mater. Sci. Eng. A., 2004, vol. 387–389, pp. 158–62.10.1016/j.msea.2004.01.059 ↗
25. A. Saeed-Akbari, L. Mosecker, A. Schwedt, and W. Bleck: Metall. Mater. Trans. A., 2012, vol. 43A, pp. 1688–704.10.1007/s11661-011-0993-4 ↗
26. J.M. Diani and D.M. Parks: J. Mech. Phys. Solids., 1998, vol. 46, pp. 1613–35.10.1016/S0022-5096(98)00001-5 ↗
27. ASTM Standard E8/E8M-13a: ASTM Int., 2013, pp. 1–27.
28. D. Maréchal, C.W. Sinclair, P. Dufour, P.J. Jacques, and J.D. Mithieux: Metall. Mater. Trans. A., 2012, vol. 43A, pp. 4601–9.10.1007/s11661-012-1258-6 ↗
29. J. Talonen, P. Aspegren, and H. Hänninen: Mater. Sci. Technol., 2004, vol. 20, pp. 1506–12.10.1179/026708304X4367 ↗
30. M. Bigdeli Karimi, H. Arabi, A. Khosravani, and J. Samei: J. Mater. Process. Technol., 2008, vol. 203, pp. 349–54.10.1016/j.jmatprotec.2007.10.029 ↗
31. S. Zaefferer, J. Ohlert, and W. Bleck: Acta Mater., 2004, vol. 52, pp. 2765–78.10.1016/j.actamat.2004.02.044 ↗
32. P.J. Brofman and G.S. Ansell: Metall. Trans. A., 1978, vol. 9, pp. 879–80.10.1007/BF02649799 ↗
33. J. Talonen: Helsinki University of Technology, 2007.
34. G. Sun, L. Du, J. Hu, B. Zhang, and R.D.K. Misra: Mater. Sci. Eng. A., 2019, vol. 746, pp. 341–55.10.1016/j.msea.2019.01.020 ↗
35. H. Barman, A.S. Hamada, T. Sahu, B. Mahato, J. Talonen, S.K. Shee, P. Sahu, D.A. Porter, and L.P. Karjalainen: Metall. Mater. Trans. A., 2014, vol. 45A, pp. 1937–52.10.1007/s11661-013-2175-z ↗
36. K.K. Spencer, M. Véron, Y. Zhang, and J.D. Embury: Mater. Sci. Technol., 2009, vol. 25, pp. 7–17.10.1179/174328408X293603 ↗
37. A.J. Bogers and W.G. Burgers: Acta Metall., 1964, vol. 12, pp. 255–61.10.1016/0001-6160(64)90194-4 ↗
38. G.B. Olson and M. Cohen: Metall. Trans. A., 1975, vol. 6, pp. 791–5.10.1007/BF02672301 ↗
39. V.S.A. Challa, X.L. Wan, M.C. Somani, L.P. Karjalainen, and R.D.K. Misra: Scr. Mater., 2014, vol. 86, pp. 60–3.10.1016/j.scriptamat.2014.05.010 ↗
40. H. Mecking and K. Lucke: Zeitschrift für Met., 1969, vol. 60, pp. 185–95.
41. H. Mecking: in Proceedings of a Symposium, A.W. Thompson., ed., American Institute of Mining Metallurgical and Petroleum Engineers, Cincinnati, Ohio, 1977, p. 67.
42. F.R.N. Nabarro, Z.S. Basinski, and D.B. Holt: Adv. Phys., 1964, vol. 13, pp. 193–323.10.1080/00018736400101031 ↗
43. C. Teena Mouni, M. S, C. Ravishankar, S.K. Albert, C.R. Das, P.K. Parida, and A. Sagdeo: Mater. Sci. Eng. A, 2021, p. 141960.10.1016/j.msea.2021.141960 ↗
44. Y.F. Shen, X.X. Li, X. Sun, Y.D. Wang, and L. Zuo: Mater. Sci. Eng. A., 2012, vol. 552, pp. 514–22.10.1016/j.msea.2012.05.080 ↗
45. H. Mecking and U.F. Kocks: Acta Metall., 1981, vol. 29, pp. 1865–75.10.1016/0001-6160(81)90112-7 ↗