Interpretation of Dynamic Strain Aging in an Intercritical Annealed Steel by Dislocation Multiplication Induced by Martensitic Transformation
Source abstract
Abstract
To elucidate the dynamic strain aging (DSA) mechanism that causes serrated flow in the tensile curves of an intercritical annealed steel with retained austenite (RA) and intercritical ferrite, the multi-aspect microstructural characterization and micromechanical deformation behavior were systematically investigated in this study. Our results demonstrate that the DSA phenomenon is dependent on the strain rate, deformation temperature, and strain. This is accompanied by deformation-induced martensitic transformation (DIMT) and the generation of crystallographic defects in nucleating and propagating Portevin-Le Chatelier bands. An increase in the deformation temperature and strain rate leads to an increase in the stacking fault energy of RA. This inhibits the growth of martensitic embryos and retards the kinetics of martensitic transformation of RA, consequently decreasing or suppressing the DSA phenomenon. Furthermore, neither the long-range diffusion model of carbon atoms nor the short-range diffusion model on the reorientation of C-Mn complexes could reasonably explain the DSA phenomenon in this study. Based on the in situ synchrotron X-ray diffraction results and established mathematical models stemming from the dislocation multiplication theory, the DSA could be attributed to the periodic instantaneous dislocation multiplication in constituent phases caused by burst DIMT.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Hydrogen embrittlement and corrosion behaviors in metals · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (67)
Show source-provided references
1. Z. Li, K.G. Pradeep, D. Yun, D. Raabe, and C.C. Tasan: Nature., 2016, vol. 534, pp. 227–30.10.1038/nature17981 ↗
2. B.B. He, B. Hu, H.W. Yen, G.J. Cheng, Z.K. Wang, H.W. Luo, and M.X. Huang: Science., 2017, vol. 357, pp. 1029–32.10.1126/science.aan0177 ↗
3. Y. Lü, B. Hutchinson, D.A. Molodov, and G. Gottstein: Acta Mater., 2010, vol. 58, pp. 3079–90.10.1016/j.actamat.2010.01.045 ↗
4. J.-B. Seol, D. Raabe, P.-P. Choi, Y.-R. Im, and C.-G. Park: Acta Mater., 2012, vol. 60, pp. 6183–99.10.1016/j.actamat.2012.07.064 ↗
5. O. Bouaziz, S. Allain, C. Scott, P. Cugy, and D. Barbier: Curr. Opin. Solid. St. M., 2011, vol. 15, pp. 141–68.10.1016/j.cossms.2011.04.002 ↗
6. S. Hwang, M.-H. Park, Y. Bai, A. Shibata, W. Mao, H. Adachi, M. Sato, and N. Tsuji: Acta Mater., 2021, vol. 205, p. 116543.10.1016/j.actamat.2020.116543 ↗
7. J.-H. Nam, S.-K. Oh, M.-H. Park, and Y.-K. Lee: Acta Mater., 2021, vol. 206, p. 116613.10.1016/j.actamat.2020.116613 ↗
8. I.-C. Jung and B.C. De Cooman: Acta Mater., 2013, vol. 61, pp. 6724–35.10.1016/j.actamat.2013.07.042 ↗
9. S.-K. Oh, M.E. Kilic, J.-B. Seol, J.-S. Hong, A. Soon, and Y.-K. Lee: Acta Mater., 2020, vol. 188, pp. 366–75.10.1016/j.actamat.2020.02.020 ↗
10. F. Yang, H. Luo, E. Pu, S. Zhang, and H. Dong: Int. J. Plast., 2018, vol. 103, pp. 188–202.10.1016/j.ijplas.2018.01.010 ↗
11. P. Van Liempt and J. Sietsma: Metall. Mater. Trans. A., 2011, vol. 42, pp. 4008–14.10.1007/s11661-011-0850-5 ↗
12. P. Penning: Acta Metall., 1972, vol. 20, pp. 1169–75.10.1016/0001-6160(72)90165-4 ↗
13. P. Hähner, A. Ziegenbein, E. Rizzi, and H. Neuhäuser: Phy. Rev. B., 2002, vol. 65, p. 134109.10.1103/PhysRevB.65.134109 ↗
14. J. Kim, S. Hong, N. Anjabin, B. Park, S. Kim, K.-G. Chin, S. Lee, and H. Kim: Mater. Sci. Eng. A., 2015, vol. 633, pp. 136–43.10.1016/j.msea.2015.03.008 ↗
15. A. Cottrell: Philos. Mag., 1953, vol. 44, pp. 829–32.10.1080/14786440808520347 ↗
16. A. Sleeswyk: Acta Metall., 1958, vol. 6, pp. 598–603.10.1016/0001-6160(58)90101-9 ↗
17. P. McCormick: Acta Metall., 1973, vol. 21, pp. 873–8.10.1016/0001-6160(73)90144-2 ↗
18. A. Van den Beukel: Phys. Status. Solidi. A., 1975, vol. 30, pp. 197–206.10.1002/pssa.2210300120 ↗
19. R. Mulford and U. Kocks: Acta Metall., 1979, vol. 27, pp. 1125–34.10.1016/0001-6160(79)90130-5 ↗
20. J. Min, L.G. Hector Jr., L. Zhang, L. Sun, J.E. Carsley, and J. Lin: Mater. Des., 2016, vol. 95, pp. 370–86.10.1016/j.matdes.2016.01.113 ↗
21. S.-J. Lee, J. Kim, S.N. Kane, and B.C. De Cooman: Acta Mater., 2011, vol. 59, pp. 6809–19.10.1016/j.actamat.2011.07.040 ↗
22. H.J. Liu, D.Y. Zhu, X. Peng, Z.M. Hu, and M.J. Wang: Adv. Mater. Res., 2013, vol. 668, pp. 861–4.10.4028/www.scientific.net/AMR.668.861 ↗
23. J. Seol, J. Kim, S. Na, C. Park, and H. Kim: Acta Mater., 2017, vol. 131, pp. 187–96.10.1016/j.actamat.2017.03.076 ↗
24. T. Shun, C. Wan, and J. Byrne: Acta Metall., 1992, vol. 40, pp. 3407–12.10.1016/0956-7151(92)90054-I ↗
25. M. Koyama, T. Sawaguchi, and K. Tsuzaki: Mater. Trans., 2012, vol. 53, pp. 546–52.10.2320/matertrans.M2011342 ↗
26. Y.-K. Lee, S. Jeong, J.-H. Kang, and S.-M. Lee: Metall. Mater. Trans. A., 2017, vol. 48, pp. 6102–10.10.1007/s11661-017-4335-z ↗
27. B. Sun, N. Vanderesse, F. Fazeli, C. Scott, J. Chen, P. Bocher, M. Jahazi, and S. Yue: Scripta Mater., 2017, vol. 133, pp. 9–13.10.1016/j.scriptamat.2017.01.022 ↗
28. F. Abu-Farha, X. Hu, X. Sun, Y. Ren, L.G. Hector, G. Thomas, and T.W. Brown: Metall. Mater. Trans. A., 2018, vol. 49, pp. 2583–96.10.1007/s11661-018-4660-x ↗
29. M. Callahan, A. Perlade, and J.-H. Schmitt: Mater. Sci. Eng. A., 2019, vol. 754, pp. 140–51.10.1016/j.msea.2019.03.042 ↗
30. X. Wang, L. Wang, and M. Huang: Acta Mater., 2017, vol. 124, pp. 17–29.10.1016/j.actamat.2016.10.069 ↗
31. B. Sun, F. Fazeli, C. Scott, B. Guo, C. Aranas Jr., X. Chu, M. Jahazi, and S. Yue: Mater. Sci. Eng. A., 2018, vol. 729, pp. 496–507.10.1016/j.msea.2018.04.115 ↗
32. B. Grzegorczyk, A. Kozłowska, M. Morawiec, R. Muszyński, and A. Grajcar: Metals., 2019, vol. 9, pp. 1–13.
33. H. Du, Y. Gong, T. Liang, Y. Li, Y. Xu, X. Lu, Q. Zeng, and X. Jin: Metall. Mater. Trans. A., 2020, vol. 51, pp. 2097–117.10.1007/s11661-020-05701-8 ↗
34. H. Du, Y. Gong, Z. Li, X. Lu, and X. Jin: Metall. Mater. Trans. A., 2021, vol. 52, pp. 2123–30.10.1007/s11661-021-06232-6 ↗
35. I. Souza Filho, A. Dutta, D.A. Junior, W. Lu, M. Sandim, D. Ponge, H. Sandim, and D. Raabe: Acta Mater., 2020, vol. 197, pp. 123–36.10.1016/j.actamat.2020.07.038 ↗
36. J.H. Lee, C.C. Aydiner, J. Almer, J. Bernier, K.W. Chapman, P.J. Chupas, D. Haeffner, K. Kump, P.L. Lee, and U. Lienert: J. Synchrotron Radiat., 2008, vol. 15, pp. 477–88.10.1107/S090904950801755X ↗
37. A.P. Hammersley, S.O. Svensson, M. Hanfland, A.N. Fitch, and D. Hausermann: High Press. Res., 1996, vol. 14, p. 14.10.1080/08957959608201408 ↗
38. K.H. Lo, C.H. Shek, and J.K.L. Lai: Mater. Sci. Eng. R., 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
39. H. Beattie and F. VerSnyder: Nature., 1956, vol. 178, pp. 208–9.10.1038/178208b0 ↗
40. S. Lee, Y. Estrin, and B.C. De Cooman: Metall. Mater. Trans. A., 2014, vol. 45, pp. 717–30.10.1007/s11661-013-2028-9 ↗
41. J. Guimaraes and V. Werneck: Mater. Sci. Eng., 1978, vol. 34, pp. 87–90.10.1016/0025-5416(78)90013-7 ↗
42. J. Guimaraes: Mater. Sci. Eng. A., 2008, vol. 475, pp. 343–7.10.1016/j.msea.2007.04.064 ↗
43. G. Olson and M. Cohen: Metall. Trans. A., 1976, vol. 7, pp. 1905–14.
44. G.B. Olson and M. Cohen: Metall. Trans. A., 1975, vol. 6, pp. 791–5.10.1007/BF02672301 ↗
45. B. Fu, W. Yang, L. Li, and Z. Sun: Mater. Sci. Eng. A., 2014, vol. 603, pp. 134–40.10.1016/j.msea.2014.02.082 ↗
46. L. Samek, E. De Moor, J. Penning, and B. De Cooman: Metall. Mater. Trans. A., 2006, vol. 37, pp. 109–24.10.1007/s11661-006-0157-0 ↗
47. P. Russo Spena, L. Cortese, M. De Maddis, and F. Lombardi: Steel Res. Int., 2016, vol. 87, pp. 1592–600.10.1002/srin.201600007 ↗
48. J. Su, D. Raabe, and Z. Li: Acta Mater., 2019, vol. 163, pp. 40–54.10.1016/j.actamat.2018.10.017 ↗
49. S. Curtze, V.-T. Kuokkala, A. Oikari, J. Talonen, and H. Hänninen: Acta Mater., 2011, vol. 59, pp. 1068–76.10.1016/j.actamat.2010.10.037 ↗
50. S. Curtze and V.-T. Kuokkala: Acta Mater., 2010, vol. 58, pp. 5129–41.10.1016/j.actamat.2010.05.049 ↗
51. L. Murr, K. Staudhammer, and S. Hecker: Metall. Trans. A., 1982, vol. 13, pp. 627–35.10.1007/BF02644428 ↗
52. C.B. Finfrock, M.M. Thrun, D. Bhattacharya, T.J. Ballard, A.J. Clarke, and K.D. Clarke: Metall. Mater. Trans. A., 2021, vol. 52, pp. 928–42.10.1007/s11661-020-06127-y ↗
53. S. Sunil and R. Kapoor: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 5667–76.10.1007/s11661-020-05968-x ↗
54. P. Rodriguez: Bull. Mater. Sci., 1984, vol. 6, pp. 653–63.10.1007/BF02743993 ↗
55. K. Rose and S. Gloverj: Acta Metall., 1966, vol. 14, pp. 1505–16.10.1016/0001-6160(66)90172-6 ↗
56. A. Howie and P. Swann: Philos. Mag., 1961, vol. 6, pp. 1215–26.10.1080/14786436108243372 ↗
57. R.A. Renzetti, H.R.Z. Sandim, R.E. Bolmaro, P.A. Suzuki, and A. Möslang: Mater. Sci. Eng. A., 2012, vol. 534, pp. 142–6.10.1016/j.msea.2011.11.051 ↗
58. Z.Y. Liang, X. Wang, W. Huang, and M.X. Huang: Acta Mater., 2015, vol. 88, pp. 170–9.10.1016/j.actamat.2015.01.013 ↗
59. Y. Li, W. Li, J.C. Hu, H.M. Song, and X.J. Jin: Int. J. Plast., 2017, vol. 88, pp. 53–69.10.1016/j.ijplas.2016.09.012 ↗
60. O. Muransky, L. Balogh, M. Tran, C. Hamelin, J.-S. Park, and M.R. Daymond: Acta Mater., 2019, vol. 175, pp. 297–313.10.1016/j.actamat.2019.05.036 ↗
61. G.T. Hahn: Acta Metall., 1962, vol. 10, pp. 727–38.10.1016/0001-6160(62)90041-X ↗
62. W.G. Johnston: J. Appl. Phys., 1962, vol. 33, pp. 2716–30.10.1063/1.1702538 ↗
63. J.H. Ryu, D.-I. Kim, H.S. Kim, H. Bhadeshia, and D.-W. Suh: Scripta Mater., 2010, vol. 63, pp. 297–9.10.1016/j.scriptamat.2010.04.020 ↗
64. S. Zhang and K. Findley: Acta Mater., 2013, vol. 61, pp. 1895–903.10.1016/j.actamat.2012.12.010 ↗
65. B. Sun, Y. Ma, N. Vanderesse, R.S. Varanasi, W. Song, P. Bocher, D. Ponge, and D. Raabe: Acta Mater., 2019, vol. 178, pp. 10–25.10.1016/j.actamat.2019.07.043 ↗
66. Z. Wang, X. Liu, Q. Yuan, R. Chen, J. He, J. Qin, Y. Huang, and H. Zhao: Metall. Mater. Trans. A., 2020, vol. 51A, pp. 4623–31.10.1007/s11661-020-05855-5 ↗
67. Y. Ma, B. Sun, A. Schökel, W. Song, D. Ponge, D. Raabe, and W. Bleck: Acta Mater., 2020, vol. 200, pp. 389–403.10.1016/j.actamat.2020.09.007 ↗