Revisiting the Role of Solutes in Grain Refinement of Hypoeutectic Alloys
Source abstract
Abstract
Experimental data on grain size in hypoeutectic alloys with various solute concentrations are collected and analyzed. Curves of grain size as functions of composition are plotted and compared with the relevant phase diagrams. These curves indicate that the minimum in grain size occurs at the solubility limit of the solute on a phase diagram, and the maxima occur at the pure metal and eutectic point where the solidification range of the alloy is zero. The grain size, d, is then plotted against phase diagram variables such as the growth restriction factor, Q, and the solidification range, ΔT. Two-parameter models are proposed to correlate grain size to phase diagram variables. Regression analysis of the experimental data with the two-parameter equations suggests that there is a clear correlation between grain size and the solidification range of the alloy. The linearity of d vs. ΔT is much better than that of d vs. Q. A grain refinement mechanism based on fragmentation and multiplication of dendrites is used to explain the dependence of d on ΔT when convection exists in the melt during solidification. Mathematical analysis indicates that the solidification range, ΔT, is actually the temperature depression of the planar solid–liquid interface under steady state growth conditions. The temperature depression at the root of a dendrite is proportional to ΔT. It is such a temperature depression that causes necking formation at the root of a dendrite. Remelting and fragmentation at the necks could occur due to local temperature fluctuations in the mushy zone in a casting where convection exists in the melt during its solidification.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. D.G. McCartney: Int. Mater. Rev., 1994, vol. 34, pp. 247–60. .10.1179/imr.1989.34.1.247 ↗
2. S. Li, K. Sadayappan, and D. Apelian: Metall. Mater. Trans. B., 2013, vol. 44B, pp. 614–23. .10.1007/s11663-013-9801-4 ↗
3. S. Lin, C. Aliravci, and M.O. Pekguleryuz: Metall. Mater. Trans. A., 2007, vol. 38A, pp. 1056–68. .10.1007/s11661-007-9132-7 ↗
4. Q. Fang and D. Granger: AFS Trans.., 1989, vol. 97, pp. 989–1000. .
5. K. Tynelius, J. Major, and D. Apelian: AFS Trans., 1993, vol. 101, pp. 401–13. .
6. A. A. Cibula: J. Inst. Met., 1951-1952, vol. 80, pp. 1-16.10.1017/S0022481200102890 ↗
7. J.A. Marcantonio and L.F. Mondolfo: Metall. Trans., 1971, vol. 2, pp. 465–71. .10.1007/BF02663335 ↗
8. G.K. Sigworth: Metall. Trans. A., 1986, vol. 22A, pp. 349–51. .10.1007/BF02643912 ↗
9. P. Schumacher and A. Greer: Mater. Sci. Eng. A., 1994, vol. 178, pp. 309–13. .10.1016/0921-5093(94)90559-2 ↗
10. W.A. Tiller, K.A. Jackson, J.W. Rutter, and B. Chalmers: Acta Metall., 1953, vol. 1, pp. 428–37. .10.1016/0001-6160(53)90126-6 ↗
11. I. Maxwell and A. Hellawell: Acta Metall., 1975, vol. 3, pp. 229–37. .10.1016/0001-6160(75)90188-1 ↗
12. W.C. Winegard and B. Chalmers: Trans. ASM., 1954, vol. 46, pp. 1214–23. .
13. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35. .10.1016/S1359-6454(00)00094-X ↗
14. M. Easton and D. StJohn: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 1613–23. .10.1007/s11661-999-0098-5 ↗
15. L.A. Tarshis, J.L. Walker, and J.W. Rutter: Metall. Trans., 1971, vol. 2, pp. 2589–97. .10.1007/BF02814899 ↗
16. Q. Han and H. Hu: Acta Metall. Sin., 1989, vol. 2(2), pp. 94–8. .
17. Q. Han and H. Hu: Cast Met.., 1989, vol. 2, pp. 123–5. .10.1080/09534962.1989.11818992 ↗
18. Spittle, and S. Sadli: Mater. Sci. Technol., 1995, vol. 11, pp. 533-537.10.1179/mst.1995.11.6.533 ↗
19. M. Johnsson and L. Bäckerud: Z. Metallkd., 1996, vol. 87, pp. 216–20. .
20. M. Easton and D. StJohn: Acta Mater., 2001, vol. 49, pp. 1867–78. .10.1016/S1359-6454(00)00368-2 ↗
21. H. Xu, L.D. Xu, S.J. Zhang, and Q. Han: Scr. Mater., 2006, vol. 54, pp. 2191–6. .10.1016/j.scriptamat.2006.02.035 ↗
22. M.H. Burden and J.D. Hunt: J. Cryst Growth., 1974, vol. 22, pp. 109–16. .10.1016/0022-0248(74)90127-4 ↗
23. G. Chai, L. Bäckerud, and L. Arnberg: Mater. Sci. Technol., 1995, vol. 11, pp. 1099–103. .10.1179/mst.1995.11.11.1099 ↗
24. M.A. Kearns and P.S. Cooper: Mater. Sci. and Technol., 1997, vol. 13, pp. 650–4. .10.1179/mst.1997.13.8.650 ↗
25. B. Chalmers: J. Aust. Inst. Met., 1962, vol. 8, pp. 255–60. .
26. K.A. Jackson, J.D. Hunt, D.R. Uhlmann, and T.P. Seward III.: Trans. Metall. Soc. AIME., 1966, vol. 236, pp. 149–58. .
27. M. Qian, P. Cao, M.A. Easton, S.D. McDonald, and D.H. St.John: Acta Mater., 2010, vol. 58, pp. 3262–70. .10.1016/j.actamat.2010.01.052 ↗
28. D.H. StJohn, M. Qian, M.A. Easton, and P. Cao: Acta Mater., 2011, vol. 59, pp. 4907–21. .10.1016/j.actamat.2011.04.035 ↗
29. D. Shu, B. Sun, J. Mi, and P.S. Grant: Acta Mater., 2011, vol. 59, pp. 2135–44. .10.1016/j.actamat.2010.12.014 ↗
30. Q. Du and Y. Li: Acta Mater., 2014, vol. 71, pp. 380–9. .10.1016/j.actamat.2014.03.028 ↗
31. M.A. Reihim, N. Hess, W. Reif, and M.E.J. Birch: J. Mater. Sci., 1987, vol. 22, pp. 213–8. .10.1007/BF01160574 ↗
32. T. Zhang, H. Jiang, J. He, and J. Zhao: Scr. Mater., 2020, vol. 179, pp. 99–101. .10.1016/j.scriptamat.2020.01.009 ↗
33. Y. Birol: Int. J. Cast Metals Res., 2013, vol. 26, pp. 22–7. .10.1179/1743133612Y.0000000023 ↗
34. J.E.C. Hutt, A.K. Dahle, Y.C. Lee, and D.H. StJohn: Light Metals., 1999, vol. 22, pp. 685–92. .
35. R.H. Mathiesen, L. Arnberg, P. Bleuet, and A. Somogyi: Metall. Mater. Trans. A., 2006, vol. 37A, pp. 2515–24. .10.1007/BF02586224 ↗
36. G. Zimmermann, C. Pickmann, M. Hamacher, E. Schaberger-Zimmermann, H. Neumann-Heyme, K. Eckert, and S. Eckert: Acta Mater., 2017, vol. 126, pp. 236–50. .10.1016/j.actamat.2016.12.063 ↗
37. H. Okamoto: J. Phase Equilib. Diffus., 2011, vol. 32, pp. 567–567. .10.1007/s11669-011-9952-4 ↗
38. M.A. Easton and D. StJohn: Metall. Mater. Trans. A., 1999, vol. 30A, pp. 1625–33. .10.1007/s11661-999-0099-4 ↗
39. L. Han, C. Vian, J. Song, Z. Liu, Q. Han, C. Xu, and L. Shao: Light Metals., 2012, vol. 6, pp. 967–71. .
40. Q. Han: J. Univ. Sci. Tech. Beijing., 1989, vol. 11(4), pp. 312–7. .
41. T.E. Quested, A.T. Dinsdale, and A.L. Greer: Acta Mater., 2005, vol. 53, pp. 1323–34. .10.1016/j.actamat.2004.11.024 ↗
42. R. Schmid-Fetzer and A. Kozlov: Acta Mater., 2011, vol. 59, pp. 6133–44. .10.1016/j.actamat.2011.06.026 ↗
43. E. Liotti, C. Arteta, A. Zisserman, A. Lui, V. Lemitshy, and P.S. Grant: Sci. Adv., 2018, vol. 4, pp. 1–9. .10.1126/sciadv.aar4004 ↗
44. H. Neumann-Heyme, N. Shevchenko, Z. Lei, K. Eckert, O. Keplinger, J. Grenzer, C. Beckermann, and S. Eckert: Acta Mater., 2018, vol. 146, pp. 176–86. .10.1016/j.actamat.2017.12.056 ↗
45. N. Shevehenko, H. Neumann-Heyme, C. Pickmann, E. Schaber-Zimmermann, G. Zimmermann, K. Eckert, and S. Eckert: IOP Conf. Series., 2017, vol. 228, p. 012005. https://doi.org/10.1088/1757-899X/228/1/012.10.1088/1757-899X/228/1/012 ↗
46. Q. Han: Scr. Mater., 2006, vol. 55, pp. 871–4. .10.1016/j.scriptamat.2006.07.052 ↗
47. C. Vreeman and F. Incropera: Int. J. Heat Mass. Transfer., 2000, vol. 43, pp. 687–704. .10.1016/S0017-9310(99)00175-1 ↗
48. D.G. Eskin, J. Zuidema Jr., V.I. Savran, and L. Katgerman: Mater Sci. Eng. A., 2004, vol. A384, pp. 232–44. .10.1016/j.msea.2004.05.066 ↗
49. V.I. Dobatkin: Continuous Casting and Casting Properties of Alloys. Oborongiz, Moscow, 1948.
50. D.A. Granger: Light Metals., 1998, vol. 38, pp. 941–52. .
51. R. Nadella, D. Eskin, and L. Katgerman: Mater. Sci. Forum., 2006, vol. 519–521, pp. 1841–6. .10.4028/www.scientific.net/MSF.519-521.1841 ↗
52. S.R. Wagstaff and A. Allianore: Metall. Mater. Trans. B., 2017, vol. 48B, pp. 2114–22. .10.1007/s11663-017-0986-9 ↗
53. A. Ohno, T. Motegi, and H. Soda: Trans. ISIJ., 1971, vol. 11, pp. 18–26. .10.2355/isijinternational1966.11.18 ↗
54. Q. Han and J. Zhang: Metall. Mater. Trans. B., 2020, vol. 51B, pp. 1795–804. .10.1007/s11663-020-01858-0 ↗
55. M.C. Flemings: Metall. Trans. B., 1991, vol. 22B, pp. 269–93. .10.1007/BF02651227 ↗
56. Z. Fan: Int. Met. Rev., 2002, vol. 47, pp. 49–85. .10.1179/095066001225001076 ↗
57. Q. Han: Metall. Mater. Trans. B., 2015, vol. 46B, pp. 1603–14. .10.1007/s11663-014-0266-x ↗
58. D. Liang, Z. Liang, Q. Zhai, G. Wang, and D.H. StJohn: Mater. Lett., 2014, vol. 130, pp. 48–50. .10.1016/j.matlet.2014.05.058 ↗
59. V.G. Smith, W.A. Tiller, and J.W. Rutter: Can. J. Phys., 1955, vol. 33, pp. 723–45. .10.1139/p55-089 ↗
60. Q. Han: Int. J. Metal Cast., 2021, https://doi.org/10.1007/s40962-020-00544-w.10.1007/s40962-020-00544-w ↗
61. Q. Han and S. Viswanathan: Metall. Mater. Trans. A., 2002, vol. 33, pp. 2067–72. .10.1007/s11661-002-0038-0 ↗
62. X. Wan, Q. Han, and J.D. Hunt: Metall. Mater. Trans. A., 1998, vol. 29A, pp. 751–5. .10.1007/s11661-998-0265-0 ↗