Nitrogen Solubility in Alloy Systems Relevant to Stainless Steels
Source abstract
Abstract
High-performance stainless steels are alloyed with nitrogen for several different reasons. For the austenitic grades, the kinetics of deleterious phase transformations are delayed, the strength is increased, and the corrosion resistance is improved. For duplex steels, the weldability and corrosion resistance depend directly on their nitrogen contents. Reliable databases are crucial for the development of new stainless steels and their processing. In order to calibrate the existing thermodynamic data, a series of experiments was undertaken. Several laboratory alloys in Fe–Cr–X systems, where X = Ni, Mn, Cu, were reacted with nitrogen gas at nitrogen activities 0.5 and 1 in the temperature range from 1050 °C to 1350 °C and subsequently analyzed for nitrogen solubility and phase constitution. A novel, simplified experimental technique was used, providing a dew point that is low enough to allow for fast nitrogen transport through the specimen surface, ensuring equilibrium conditions. The results are compared to thermodynamic equilibrium calculations.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · High-Temperature Coating Behaviors · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. 1. G.F. Tisinai, J.K. Stanley, and C.H. Samans: JOM, 1954, vol. 6, pp. 1259–67.10.1007/BF03398366 ↗
2. 2. H. Thier, A. Bäumel, and E. Schmidtmann: Arch. Eisenhüttenwes., 1969, vol. 40, pp. 333–39.10.1002/srin.196904324 ↗
3. 3. K. Bungardt, G. Lennartz, and R. Oppenheim: DEW Technische Berichte, 1969, vol. 7, pp. 71–89.
4. 4. H. Brandis, W. Heimann, and E. Schmidtmann: TEW-Technische Berichte, 1976, vol. 2, pp. 150–66.
5. 5. H. Laddach, G. Lennartz, and G. Preis: DEW Technische Berichte, 1973, vol. 13, pp. 75–84.
6. 6. U. Heubner, M. Rockel, and E. Wallis: Werkstoffe Korr., 1989, vol. 40, pp. 459–66.10.1002/maco.19890400802 ↗
7. 7. R.F.A. Jargelius-Pettersson: ISIJ Int., 1996, vol. 36, pp. 818–24.10.2355/isijinternational.36.818 ↗
8. M. Liljas and R. Qvarfort: Duplex Stainless Steels ‘86 Conf., 1986, pp. 244–56.
9. J.-O. Andersson, A.F. Guillermet, S. Hertzman, M. Hillert, B. Jansson, B. Sundman, and J. Ågren: Calphad XI Conf., 1982.
10. 10. H. Vannevik, J.-O. Nilsson, J. Frodigh, and P. Kangas: ISIJ Int., 1996, vol. 36, pp. 807–12.10.2355/isijinternational.36.807 ↗
11. P.U. Hagenfelt, S.-O. Bernhardsson, and E.V.S. Lagerberg: U.S. Patent No. 4765953, 1988.
12. 12. K. Lorentz and G. Médawar: Thyssenforschung, 1969, vol. 1, pp. 97–108.
13. 13. R.F.A. Jargelius-Pettersson: Corrosion, 1998, vol. 54, pp. 162–68.10.5006/1.3284840 ↗
14. 14. M. Jarl: Scand. J. Met., 1978, vol. 7, pp. 93–101.
15. 15. S. Hertzman and M. Jarl: Metall. Trans. A, 1987, vol. 18A, pp. 1745–52.10.1007/BF02646206 ↗
16. K. Frisk K: Metall. Trans. A, 1990, vol. 21A, pp. 2477–88.10.1007/BF02646992 ↗
17. C. Qui: Ph.D. Thesis, KTH Royal Institute of Technology, Stockholm, 1993.
18. 18. K. Frisk: Calphad, 1991, vol. 15, pp. 79–106.10.1016/0364-5916(91)90028-I ↗
19. 19. B. Sundman, B. Jansson, and J.-O. Andersson: Calphad, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
20. 20. S. Wessman and R. Pettersson: Steel Res. Int., 2015, vol. 86, pp. 1339–49.10.1002/srin.201400277 ↗
21. 21. A. Malik, J. Odqvist, L. Höglund, S. Hertzman, and J. Ågren: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4914–28.10.1007/s11661-017-4214-7 ↗
22. 22. S. Hertzman, P. Ferreira, and B. Brolund: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 177–285.
23. 23. K.H. Jack: Scand. J. Metall., 1972, vol. 1, pp. 195–202.
24. R.F.A. Jargelius Pettersson, T. Ekman, S. Hertzman, T. Holm, and J. Linder: Mater. Sci. Technol., 1993, vol. 9, pp. 1123–32.10.1179/mst.1993.9.12.1123 ↗
25. W.B. Hutchinson: Swerim AB, Luleå, Sweden, personal comment.
26. M. Khoda Karami and A. Kohanzadehmaranlou: Master’s Thesis, KTH Royal Institute of Technology, Stockholm, 2013.
27. 27. Z. Jiang, H. Li, Z. Chen, Z. Huang, D. Zou, and L. Liang: Steel Res. Int., 2005, vol. 76, pp. 740–45.10.1002/srin.200506090 ↗
28. 28. N. Pettersson, S. Wessman, S. Hertzman, and A. Studer: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 156–271.
29. Y. Imai, T. Masumoto, and K. Maeda: Sci. Rep. Res. Inst. Tohoku Univ. Ser. A, 1967, vol. 19, pp. 35–49.
30. 30. N. Suutala: Metall. Trans. A, 1982, vol. 13A, pp. 2121–30.10.1007/BF02648382 ↗
31. 31 P. Johansson and M. Liljas: ACOM (Sweden), 2002, vols. 1–2, pp. 17–23.
32. 32. E. Westin, B. Brolund, and S. Hertzman: Steel Res. Int., 2006, vol. 77, pp. 473–81.
33. 33. S. Nana and M.B. Cortie: J. S. Afr. Inst. Min. Metall., 1993, vol. 93, pp. 307–15.
34. 34. J.-C. Bavay, S. Daboval, and M. Thomas: Stainless Steel 1991 Conf., 1991, pp. 93–98.
35. 35. S. Nana and M.B. Cortie: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 2436–44.10.1007/BF02652337 ↗
36. O. Smuk: Ph.D. Thesis, KTH Royal Institute of Technology, Stockholm, 2004.
37. 37. O. Smuk, M. Selleby, and B. Bergman: Z. Metallkd., 2005, vol. 96, pp. 918–23.10.3139/146.101120 ↗