journal article·2021-07

Effect of Phosphorus Additions on the Microstructure and Creep Properties of a Wrought Ni-Base Superalloy

Linhan Li, Zhuo Liu, Sammy Tin

Publisher page

Abstract

A wrought Ni-base superalloy, Waspaloy, with four nominal levels of P additions (0, 0.01, 0.02, and 0.04 wt pct) was studied in order to better understand how P influences the grain boundary microstructures as well as creep resistance. Results from this investigation revealed that P additions promoted the precipitation of M23C6 carbides at grain boundaries. The effect of P additions on the creep properties was assessed by both creep rupture and interrupted creep tests at 816 °C/180 MPa and 650 °C/760 MPa. Changes in the fraction and morphology of the M23C6 carbides at grain boundaries due to P additions were found to result in a notable reduction of the creep ductility when tested at 650 °C/760 MPa where the creep strain was localized along the grain boundaries. However, the additions of P and associated changes in the M23C6 carbides did not affect the creep behavior of samples tested at 816 °C/180 MPa where the creep strain was largely transgranular. This study reveals that P affects the creep resistance of the polycrystalline Ni-base superalloys by accelerating the nucleation and growth kinetics of M23C6 along the grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Advanced Materials Characterization Techniques · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (47)

Show source-provided references
1. R.J. Mitchell: Encycl. Aerosp. Eng., 2010, pp. 1–12.
2. 2 T.M. Pollock and S. Tin: J. Propuls. Power, 2006, vol. 22, pp. 361–74.10.2514/1.18239 ↗
3. 3 T. Watanabe: J. Mater. Sci., 2011, vol. 46, pp. 4095–115.10.1007/s10853-011-5393-z ↗
4. 4 A. Das: Philos. Mag., 2017, vol. 97, pp. 867–916.10.1080/14786435.2017.1285072 ↗
5. 5 L. Thébaud, P. Villechaise, C. Crozet, A. Devaux, D. Béchet, J.M. Franchet, A.L. Rouffié, M. Mills, and J. Cormier: Mater. Sci. Eng. A, 2018, vol. 716, pp. 274–83.10.1016/j.msea.2017.12.104 ↗
6. 6 A.K. Jena and M.C. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121–39.10.1007/BF00549796 ↗
7. 7 Q.Z. Chen, C.N. Jones, and D.M. Knowles: Mater. Sci. Eng. A, 2004, vol. 385, pp. 402–18.10.1016/S0921-5093(04)00905-0 ↗
8. 8 P. Kontis, H.A.M. Yusof, S. Pedrazzini, M. Danaie, K.L. Moore, P.A.J. Bagot, M.P. Moody, C.R.M. Grovenor, and R.C. Reed: Acta Mater., 2016, vol. 103, pp. 688–99.10.1016/j.actamat.2015.10.006 ↗
9. 9 D. Tytko, P.P. Choi, J. Klöwer, A. Kostka, G. Inden, and D. Raabe: Acta Mater., 2012, vol. 60, pp. 1731–40.10.1016/j.actamat.2011.11.020 ↗
10. 10 P. Kontis, E. Alabort, D. Barba, D.M. Collins, A.J. Wilkinson, and R.C. Reed: Acta Mater., 2017, vol. 124, pp. 489–500.10.1016/j.actamat.2016.11.009 ↗
11. 11 P.J. Zhou, J.J. Yu, X.F. Sun, H.R. Guan, and Z.Q. Hu: Mater. Sci. Eng. A, 2008, vol. 491, pp. 159–63.10.1016/j.msea.2008.02.019 ↗
12. S. Guo, W. Sun, D. Lu, and Z. Hu: in Superalloys 718, 625, 706 and various derivatives, 1997, pp. 521–30.10.7449/1997/Superalloys_1997_521_530 ↗
13. 13 W.R. Sun, S.R. Guo, J.H. Lee, N.K. Park, Y.S. Yoo, S.J. Choe, and Z.Q. Hu: Mater. Sci. Eng. A, 1998, vol. 247, pp. 173–9.10.1016/S0921-5093(97)00753-3 ↗
14. 14 S. Yang, W. Sun, J. Wang, Z. Ge, S. Guo, and Z. Hu: J. Mater. Sci. Technol., 2011, vol. 27, pp. 539–45.10.1016/S1005-0302(11)60105-9 ↗
15. W.R. Sun, S.R. Guo, D.Z. Lu, and Z.Q. Hu: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 649–54.10.1007/s11661-997-0050-5 ↗
16. 16 Z. Hu, W. Sun, S. Yang, S. Guo, and H. Yang: Mater. Trans., 2009, vol. 50, pp. 1638–43.10.2320/matertrans.MF200908 ↗
17. Y. Hasebe, M. Yoshida, E. Maeda, and S. Ohsaki: in Proceedings of the 9th International Symposium on Superalloy 718 & Derivatives: Energy, Aerospace, and Industrial Applications, 2018, pp. 527–40.10.1007/978-3-319-89480-5_34 ↗
18. 18 S. Guan, C. Cui, Y. Yuan, and Y. Gu: Mater. Sci. Eng. A, 2016, vol. 662, pp. 275–82.10.1016/j.msea.2016.03.069 ↗
19. 19 C. Wang, H. Zhao, Y. Guo, J. Guo, and L. Zhou: Mater. Res. Innov., 2014, vol. 18, pp. S4324–30.10.1179/1432891714Z.000000000833 ↗
20. W.D. Cao and R.L. Kennedy: in Proceedings of the International Symposium on Superalloys, 1996, pp. 589–97.10.7449/1996/Superalloys_1996_589_597 ↗
21. X. Xie, X. Liu, J. Dong, Y. Iu, Z. Xu, Y. Zhu, W. Luo, Z. Zhang, and R.G. Thompson: in Superalloys 718, 625, 706 and Various Derivatives, 1997, pp. 531–42.10.7449/1997/Superalloys_1997_531_542 ↗
22. W.D. Cao and R.L. Kennedy: in Superalloys 718, 625, 706 and Various Derivatives, 1997, pp. 511–20.10.7449/1997/Superalloys_1997_511_520 ↗
23. X. Xie, X. Liu, Y. Hu, B. Tang, Z. Xu, J. Dong, K. Ni, Y. Zhu, S. Tien, L. Zhang, and W. Xie: in Proceedings of the International Symposium on Superalloys, 1996, pp. 599–606.10.7449/1996/Superalloys_1996_599_606 ↗
24. 24 H. Song, S. Guo, and Z. Hu: Scr. Mater., 1999, vol. 41, pp. 215–9.10.1016/S1359-6462(99)00158-X ↗
25. W.R. Sun, H.R. Guan, M. Wang, Z.G. Wang, L.F. Huang, and Z.Q. Hu: in Superalloys 718, 625, 706 and Derivatives, 2005, pp. 399–407.10.7449/2005/Superalloys_2005_399_407 ↗
26. 26 X. Liu, J. Dong, B. Tang, Y. Hu, and X. Xie: Mater. Sci. Eng. A, 1999, vol. 270, pp. 190–6.10.1016/S0921-5093(99)00153-7 ↗
27. 27 M. Wang, J. Du, Q. Deng, Z. Tian, and J. Zhu: Mater. Sci. Eng. A, 2015, vol. 626, pp. 382–9.10.1016/j.msea.2014.12.094 ↗
28. 28 S. Zhang, A. Zhang, L. Chang, W. Wang, X. Xin, and W. Sun: Mater. Sci. Eng. A, 2019, vol. 761, p. 137981.10.1016/j.msea.2019.05.111 ↗
29. 29 S. Zhang, A. Zhang, C. Xue, D. Jia, W. Zhang, W. Wang, X. Xin, and W. Sun: Crystals, 2020, vol. 10, pp. 1–9.
30. 30 C.L. White, R.A. Padgett, R.W. Swindeman, C. Division, O. Ridge, and O. Ridge: Scr. Metall., 1981, vol. 15, pp. 777–82.10.1016/0036-9748(81)90019-3 ↗
31. 31 J.H. Hong, S.W. Nam, and S.P. Choi: J. Mater. Sci., 1986, vol. 21, pp. 3966–76.10.1007/PL00020267 ↗
32. 32 M.H. Jang, J.Y. Kang, J.H. Jang, T.H. Lee, and C. Lee: Mater. Sci. Eng. A, 2017, vol. 684, pp. 14–21.10.1016/j.msea.2016.12.021 ↗
33. 33 M.J. Donachie, A.A. Pinkowish, W.P. Danesi, J.F. Radavich, and W.H. Couts: Metall. Trans., 1970, vol. 1, pp. 2623–30.10.1007/BF03038394 ↗
34. 34 Z. Yao, M. Zhang, and J. Dong: Metall. Mater. Trans. A, 2013, vol. 44, pp. 3084–98.10.1007/s11661-013-1660-8 ↗
35. 35 Y.C. Fayman: Mater. Sci. Eng., 1986, vol. 82, pp. 203–15.10.1016/0025-5416(86)90108-4 ↗
36. 36 B.H. Toby and R.B. Von Dreele: J. Appl. Crystallogr., 2013, vol. 46, pp. 544–9.10.1107/S0021889813003531 ↗
37. 37 S. Antonov, D. Isheim, D.N. Seidman, and S. Tin: Materialia, 2019, vol. 7, p. 100423.10.1016/j.mtla.2019.100423 ↗
38. 38 S.J. Sijbrandij, M.K. Miller, J.A. Horton, and W.D. Cao: Mater. Sci. Eng. A, 1998, vol. 250, pp. 115–9.10.1016/S0921-5093(98)00546-2 ↗
39. 39 W. Liu, C. Ren, H. Han, J. Tan, Y. Zou, X. Zhou, P. Huai, and H. Xu: J. Appl. Phys., 2014, vol. 115, pp. 043706-1–7.
40. 40 L. Lundin and B. Richarz: Appl. Surf. Sci., 1995, vol. 87, pp. 194–9.10.1016/0169-4332(94)00519-2 ↗
41. 41 M.I. Isik, A. Kostka, V.A. Yardley, K.G. Pradeep, M.J. Duarte, P.P. Choi, D. Raabe, and G. Eggeler: Acta Mater., 2015, vol. 90, pp. 94–104.10.1016/j.actamat.2015.01.027 ↗
42. 42 N.S. Lim, C.W. Bang, S. Das, H.W. Jin, R. Ayer, and C.G. Park: Met. Mater. Int., 2012, vol. 18, pp. 87–94.10.1007/s12540-012-0011-4 ↗
43. 43 H.U. Hong, B.S. Rho, and S.W. Nam: Mater. Sci. Eng. A, 2001, vol. 318, pp. 285–92.10.1016/S0921-5093(01)01254-0 ↗
44. 44 Y.S. Lim, D.J. Kim, S.S. Hwang, H.P. Kim, and S.W. Kim: Mater. Charact., 2014, vol. 96, pp. 28–39.10.1016/j.matchar.2014.07.008 ↗
45. 45 L. Jiang, R. Hu, H. Kou, J. Li, G. Bai, and H. Fu: Mater. Sci. Eng. A, 2012, vol. 536, pp. 37–44.10.1016/j.msea.2011.11.060 ↗
46. 46 M. Whittaker, W. Harrison, C. Deen, C. Rae, and S. Williams: Materials., 2017, vol. 10, pp. 1–14.10.3390/ma10010061 ↗
47. 47 Y.T. Tang, A.J. Wilkinson, and R.C. Reed: Metall. Mater. Trans. A, 2018, vol. 49, pp. 4324–42.10.1007/s11661-018-4671-7 ↗