Precision Thermal Treatments, Atom Probe Characterization, and Modeling to Describe the Fe-Cr Metastable Miscibility Gap
Source abstract
Abstract
Abstract The Fe-Cr metastable miscibility gap has been studied by high-precision thermal treatments, Vickers micro-hardness (HV) measurements, and atom probe tomography (APT). Thermodynamic modeling further supplements the experimental work. The results obtained show that recent thermodynamic descriptions of the metastable miscibility gap found in literature generally overestimates the consolute temperature. We can show that the source of ambiguity in previous studies is most likely a lack of clear distinction between Cr-Cr clustering and $$ \alpha\prime $$ formation. This distinction is here made by APT results, and it leads to a determined consolute temperature of 580 ± 1 °C for Fe0.50Cr0.50. The revised thermodynamic modeling of the metastable miscibility gap captures the experimental results and is consistent with the overall picture from the Fe-Cr data in the literature. Graphic Abstract
Source: crossref · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Materials Characterization Techniques · Advanced materials and composites · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. H.D. Newell: Metals Prog., 1949, vol. 49, pp. 977–1006.
2. K.H. Lo, C.H. Shek, and J.K.L. Lai: Materials Science and Engineering: R: Reports, 2009, vol. 65, pp. 39–104.10.1016/j.mser.2009.03.001 ↗
3. C. Capdevila, J. Chao, J.A. Jimenez, and M.K. Miller: Mater. Sci. Technol., 2013, vol. 29, pp. 1179–84.10.1179/1743284713Y.0000000215 ↗
4. D. Terentyev, L. Malerba, and A. V. Barashev: Philos. Mag. Lett., 2005, vol. 85, pp. 587–94.10.1080/09500830500383563 ↗
5. J. Wallenius, P. Olsson, L. Malerba, and D. Terentyev: Nuclear Instruments and Methods in Physics Research Section B: Beam Interactions with Materials and Atoms, 2007, vol. 255, pp. 68–74.10.1016/j.nimb.2006.11.063 ↗
6. M.A. Choudhary, J. Kundin, and H. Emmerich: Philosophical Magazine Letters, 2012, vol. 92, pp. 451–8.10.1080/09500839.2012.686173 ↗
7. K.L. Wong, H.-J. Lee, J.-H. Shim, B. Sadigh, and B.D. Wirth: Journal of Nuclear Materials, 2009, vol. 386–388, pp. 227–30.10.1016/j.jnucmat.2008.12.092 ↗
8. T. Manninen: Mechanical Properties of Ferritic Stainless Steels at Elevated Temperature, https://www.academia.edu/9039435/Mechanical_Properties_of_Ferritic_Stainless_Steels_at_Elevated_Temperature. Accessed 1 December 2015.
9. T. Zhang, Y. Han, W. Wang, Y. Gao, Y. Song, and X. Ran: Acta Metall. Sin., 2020, vol. 33, pp. 1289–301.10.1007/s40195-020-01049-5 ↗
10. M. Hillert: Acta Metallurgica, 1961, vol. 9, pp. 525–35.10.1016/0001-6160(61)90155-9 ↗
11. J.W. Gibbs: The Scientific Papers of J. Willard Gibbs, Ph.D., LL.D., vol. 1 Thermodynamics, Longmans, Green, and CO., 39 Paternoster Row, London, 1906.
12. J.W. Cahn: Acta Metallurgica, 1961, vol. 9, pp. 795–801.10.1016/0001-6160(61)90182-1 ↗
13. W. Xiong, M. Selleby, Q. Chen, J. Odqvist, and Y. Du: Critical Reviews in Solid State and Materials Sciences, 2010, vol. 35, pp. 125–52.10.1080/10408431003788472 ↗
14. W. Xiong, P. Hedström, M. Selleby, J. Odqvist, M. Thuvander, and Q. Chen: Calphad, 2011, vol. 35, pp. 355–66.10.1016/j.calphad.2011.05.002 ↗
15. H. Kuwano: Transaction of the Japan Institute of Metals, 1985, vol. 26, pp. 473–81.10.2320/matertrans1960.26.473 ↗
16. Y. Li, Y. Pang, X. Wu, and W. Liu: Modelling Simul. Mater. Sci. Eng., 2014, vol. 22, p. 035009.10.1088/0965-0393/22/3/035009 ↗
17. A. Dahlström, F. Danoix, P. Hedström, J. Odqvist, and H. Zapolsky: Scripta Materialia, 2020, vol. 180, pp. 62–5.10.1016/j.scriptamat.2020.01.024 ↗
18. F. Danoix and P. Auger: Materials Characterization, 2000, vol. 44, pp. 177–201.10.1016/S1044-5803(99)00048-0 ↗
19. M.K. Miller and R.G. Forbes: Atom-Probe Tomography, Springer US, Boston, MA, 2014.10.1007/978-1-4899-7430-3 ↗
20. B. Gault, F. Danoix, K. Hoummada, D. Mangelinck, and H. Leitner: Ultramicroscopy, 2012, vol. 113, pp. 182–91.10.1016/j.ultramic.2011.06.005 ↗
21. M.P. Moody, B. Gault, L.T. Stephenson, D. Haley, and S.P. Ringer: Ultramicroscopy, 2009, vol. 109, pp. 815–24.10.1016/j.ultramic.2009.03.016 ↗
22. F. Vurpillot, M. Gruber, G. Da Costa, I. Martin, L. Renaud, and A. Bostel: Ultramicroscopy, 2011, vol. 111, pp. 1286–94.10.1016/j.ultramic.2011.04.001 ↗
23. M. Wada: Surface Science, 1984, vol. 145, pp. 451–65.10.1016/0039-6028(84)90093-1 ↗
24. D. Blavette, G. Grancher, and A. Bostel: J. Physique Colloques, 1988, vol. 49, pp. C6-433–C6-438.10.1051/jphyscol:1988674 ↗
25. E.A. Marquis: Dissertation, Northwestern University, 2002.
26. B. Gault, M.P. Moody, J.M. Cairney, and S.P. Ringer: Atom Probe Microscopy, Springer , New York, 2012.10.1007/978-1-4614-3436-8 ↗
27. N. Pettersson, S. Wessman, M. Thuvander, P. Hedström, J. Odqvist, R.F.A. Pettersson, and S. Hertzman: Materials Science and Engineering: A, 2015, vol. 647, pp. 241–8.10.1016/j.msea.2015.09.009 ↗
28. S.M. Dubiel and J. Żukrowski: Acta Materialia, 2013, vol. 61, pp. 6207–12.10.1016/j.actamat.2013.07.003 ↗
29. A.V. Ceguerra, M.P. Moody, L.T. Stephenson, R.K.W. Marceau, and S.P. Ringer: Philosophical Magazine, 2010, vol. 90, pp. 1657–83.10.1080/14786430903441475 ↗
30. M.P. Moody, B. Gault, L.T. Stephenson, R.K.W. Marceau, R.C. Powles, A.V. Ceguerra, A.J. Breen, and S.P. Ringer: Microscopy and Microanalysis, 2011, vol. 17, pp. 226–39.10.1017/S1431927610094535 ↗
31. J. Zhou, J. Odqvist, M. Thuvander, and P. Hedström: Microscopy and Microanalysis, 2013, vol. 19, pp. 665–675.10.1017/S1431927613000470 ↗
32. A.V. Ceguerra, R.C. Powles, M.P. Moody, and S.P. Ringer: Phys. Rev. B. (2010) doi:10.1103/physrevb.82.132201.10.1103/physrevb.82.132201 ↗
33. S. Mukherjee, N. Kodali, D. Isheim, S. Wirths, J.M. Hartmann, D. Buca, D.N. Seidman, and O. Moutanabbir: Phys. Rev. B, 2017, vol. 95, p. 161402.10.1103/PhysRevB.95.161402 ↗
34. M.Yu. Lavrentiev, D. Nguyen-Manh, and S.L. Dudarev: Journal of Nuclear Materials, 2018, vol. 499, pp. 613–21.10.1016/j.jnucmat.2017.10.038 ↗
35. M.Yu. Lavrentiev, R. Drautz, D. Nguyen-Manh, T.P.C. Klaver, and S.L. Dudarev: Phys. Rev. B, 2007, vol. 75, p. 014208.10.1103/PhysRevB.75.014208 ↗
36. F. Danoix, G. Grancher, A. Bostel, and D. Blavette: Ultramicroscopy, 2007, vol. 107, pp. 739–43.10.1016/j.ultramic.2007.02.005 ↗
37. D.J. Larson, T.J. Prosa, R.M. Ulfig, B.P. Geiser, and T.F. Kelly: Local Electrode Atom Probe Tomography: A User’s Guide, Springer-Verlag, New York, 2013.10.1007/978-1-4614-8721-0 ↗
38. H.L. Lukas, S.G. Fries, and B. Sundman: Computational Thermodynamics—The Calphad Method. Cambridge University Press, Cambridge, 2007.10.1017/CBO9780511804137 ↗
39. J.-O. Andersson, T. Helander, L. Höglund, P. Shi, and B. Sundman: Calphad, 2002, vol. 26, pp. 273–312.10.1016/S0364-5916(02)00037-8 ↗
40. F. Danoix, J. Lacaze, A. Gibert, D. Mangelinck, K. Hoummada, and E. Andrieu: Ultramicroscopy, 2013, vol. 132, pp. 193–8.10.1016/j.ultramic.2012.12.004 ↗
41. C. Pareige, S. Novy, S. Saillet, and P. Pareige: Journal of Nuclear Materials, 2011, vol. 411, pp. 90–6.10.1016/j.jnucmat.2011.01.036 ↗
42. S. Novy, P. Pareige, and C. Pareige: Journal of Nuclear Materials, 2009, vol. 384, pp. 96–102.10.1016/j.jnucmat.2008.10.008 ↗
43. W. Lefebvre-Ulrikson, F. Vurpillot, and X. Sauvage, eds.: in Atom Probe Tomography Put Theory Into Practice. Academic Press, New York, 2016, p. iii.
44. L.T. Stephenson, M.P. Moody, P.V. Liddicoat, and S.P. Ringer: Microscopy and Microanalysis, 2007, vol. 13, pp. 448–63.10.1017/S1431927607070900 ↗
45. A. Deschamps, C. Sigli, T. Mourey, F. de Geuser, W. Lefebvre, and B. Davo: Acta Materialia, 2012, vol. 60, pp. 1917–28.10.1016/j.actamat.2012.01.010 ↗
46. M.K. Miller: Atom Probe Tomography: Analysis at the Atomic Level, Springer US, 2000.10.1007/978-1-4615-4281-0 ↗
47. T. Barkar, L. Höglund, J. Odqvist, and J. Ågren: Computational Materials Science, 2018, vol. 143, pp. 446–53.10.1016/j.commatsci.2017.11.043 ↗
48. T. Philippe and D. Blavette: Philos. Mag., vol. 2011, p. 4606-4622, 2011.10.1080/14786435.2011.616548 ↗
49. J.-O. Andersson and B. Sundman: Calphad, 1987, vol. 11, pp. 83–92.10.1016/0364-5916(87)90021-6 ↗
50. S.M. Dubiel and G. Inden: Z. Metallkd., vol. 1987, p. 544.10.1515/ijmr-1987-780802 ↗
51. S. Katano and M. Iizumi: Physica B, 1983, vol. 120, pp. 392–96.10.1016/0378-4363(83)90413-8 ↗
52. D. Chandra and L.H. Schwartz: Metall. Trans, 1971, vol. 2, pp. 511–19.10.1007/BF02663342 ↗
53. F. Bergner, A. Ulbricht, and C. Heintze: Scripta Materialia, 2009, vol. 61, pp. 1060–3.10.1016/j.scriptamat.2009.08.028 ↗
54. W. Guo, D.A. Garfinkel, J.D. Tucker, D. Haley, G.A. Young, and J.D. Poplawsky: Nanotechnology, 2016, vol. 27, p. 254004.10.1088/0957-4484/27/25/254004 ↗
55. M.K. Miller, J.M. Hyde, M.G. Hetherington, A. Cerezo, G.D.W. Smith, and C.M. Elliott: Acta Metallurgica et Materialia, 1995, vol. 43, pp. 3385–401.10.1016/0956-7151(95)00040-3 ↗
56. H. Kuwano: Trans. Jpn. Inst. Met., 1985, Vol. 26, pp. 482–91.10.2320/matertrans1960.26.482 ↗
57. R.O. Williams and H.W. Paxton: J. Iron Steel Inst., 1957, vol. 185, p. 358.
58. Y. Ustinovshikov and B. Pushkarev: Journal of Alloys and Compounds, 2005, vol. 389, pp. 95–101.10.1016/j.jallcom.2004.07.050 ↗
59. W. Xiong, Q. Chen, P.A. Korzhavyi, and M. Selleby: Calphad, 2012, vol. 39, pp. 11–20.10.1016/j.calphad.2012.07.002 ↗