Effect of Interlayer Interval Time on the Microstructure and Mechanical Behavior of Additively Manufactured WE43 Mg Alloy
Source abstract
Abstract
Additive manufacturing of magnesium (Mg) alloys has gained interest for the potential to fabricate complex geometries for extreme light-weighting or improved functionality. In this study, the effect of interlayer interval time and post-deposition processing (i.e., heat treatment and hot isostatic pressing (HIP)) on the microstructure and mechanical behavior of WE43 Mg specimens fabricated by laser powder directed energy deposition (LPDED) was investigated. Microstructure characterization was conducted using optical microscopy, scanning electron microscopy, scanning transmission electron microscopy, and energy dispersive X-ray spectroscopy. Mechanical behavior was evaluated using microhardness and uniaxial tensile testing. Post-processing resulted in improved yield strength, tensile strength, and ductility, which was attributed to a reduction in porosity and, to a lesser extent, the formation of second phase particles. The as-deposited specimens exhibited porosity below 3 pct and HIP treatment reduced porosity to below 0.1 pct. HIP specimens, processed with low interlayer interval time, exhibited the best combination of strength (~ 243 MPa tensile strength) and ductility (~ 9 pct elongation). Changes in interlayer interval time had limited impact on the grain size, hardness, or yield strength. However, increased interlayer interval time (~ 112 pct increase) caused a slight increase in gas porosity and dramatic reduction in tensile strength and ductility, which was attributed to the formation of lack-of-fusion defects in interlayer regions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Additive Manufacturing Materials and Processes · High Entropy Alloys Studies
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. S. Agnew: Scr. Mater., 2010, vol. 63, pp. 671-73.10.1016/j.scriptamat.2010.06.029 ↗
2. M. Gupta and S. N. M. Ling: Magnesium, magnesium alloys, and magnesium composites, 1 st ed. Wiley, Hoboken 2011.10.1002/9780470905098 ↗
3. Y. Chen, Z. Xu, C. Smith and J. Sankar: Acta Biomater., 2014, vol. 10, pp. 4561-73.10.1016/j.actbio.2014.07.005 ↗
4. M. Gupta: Mater. Sci. Eng. Int. J., 2018, vol. 2, pp. 30-33.
5. Y. Zheng, X. Gu and F. Witte: Materials Science and Engineering: R: Reports, 2014, vol. 77, pp. 1-34.10.1016/j.mser.2014.01.001 ↗
6. K. Wei, M. Gao, Z. Wang and X. Zeng: Mater. Sci. Eng. A., 2014, vol. 611, pp. 212-22.10.1016/j.msea.2014.05.092 ↗
7. S. Palanivel, P. Nelaturu, B. Glass and R. Mishra: Materials & Design, 2015, 65, 934-52.10.1016/j.matdes.2014.09.082 ↗
8. S. M. Thompson, L. Bian, N. Shamsaei and A. Yadollahi: Addit. Manuf., 2015, vol. 8, pp. 36-62.
9. W. J. Sames, F. List, S. Pannala, R. R. Dehoff and S. S. Babu: Int. Mater. Rev., 2016, vol. 61, pp. 315-60.10.1080/09506608.2015.1116649 ↗
10. V. Manakari, G. Parande and M. Gupta: Metals, 2016, vol. 7, pp. 2-36.10.3390/met7010002 ↗
11. D. Herzog, V. Seyda, E. Wycisk and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371-92.10.1016/j.actamat.2016.07.019 ↗
12. M. Schmidt, M. Merklein, D. Bourell, D. Dimitrov, T. Hausotte, K. Wegener, L. Overmeyer, F. Vollertsen and G. N. Levy: CIRP Ann Manuf Technol, 2017, vol. 66, pp. 561-83.10.1016/j.cirp.2017.05.011 ↗
13. N. Shamsaei, A. Yadollahi, L. Bian and S. M. Thompson: Addit. Manuf., 2015, vol. 8, pp. 12-35.
14. A. Yadollahi, N. Shamsaei, S. M. Thompson and D. W. Seely: Mater. Sci. Eng. A., 2015, vol. 644, pp. 171-83.10.1016/j.msea.2015.07.056 ↗
15. Z. Wang, T. A. Palmer and A. M. Beese: Acta Mater., 2016, vol. 110, pp. 226-35.10.1016/j.actamat.2016.03.019 ↗
16. M. Izadi, A. Farzaneh, I. Gibson and B. Rolfe: Proc. Solid Freeform Fabr., 28th Annu. Int. Solid Freeform Fabr. Symp., Additive Manuf. Conf., 2017, pp. 1058–67.
17. A. Adeyemi, E. Akinlabi and R. Mahamood: Annals of the University’Dunarea de Jos’ of Galati: Fascicle XII, Welding Equipment & Technology, 2018, vol. 29, pp. 57-63.
18. I. Loginova, A. Khalil, A. Y. Churyumov, A. Solonin and N. Popov: KnE. engr., 2019, vol. 1, pp. 82-93.10.18502/keg.v1i1.4394 ↗
19. B. Torries, S. Shao, N. Shamsaei and S. Thompson: Solid Freeform Fabrication Proceedings, 2016, pp. 1272–82.
20. M. Ma, Z. Wang and X. Zeng: Mater. Charact., 2015, vol. 106, pp. 420-27.10.1016/j.matchar.2015.06.027 ↗
21. T. Long, X. Zhang, Q. Huang, L. Liu, Y. Liu, J. Ren, Y. Yin, D. Wu and H. Wu: Virtual Phys. Prototyp., 2018, vol. 13, pp. 71-81.10.1080/17452759.2017.1411662 ↗
22. R. Tandon, T. Palmer, M. Gieseke, C. Noelke and S. Kaierle: European Congress and Exhibition on Powder Metallurgy. European PM Conference Proceedings, 2016, pp. 1–6.
23. E. Herderick: Materials Science and Technology (MS&T), 2011.
24. W. E. Frazier: Journal of Materials Engineering and Performance, 2014, vol. 23, pp. 1917-28.10.1007/s11665-014-0958-z ↗
25. X. Wang, X. Gong and K. Chou: Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 2017, vol. 231, pp. 1890-903.10.1177/0954405415619883 ↗
26. M. Zhang, C. Chen, C. Liu and S. Wang: Metals, 2018, vol. 8, pp. 635-53.10.3390/met8080635 ↗
27. R. Tandon, T. Wilks, D. I. M. Gieseke, D. I. C. Noelke, S. Kaierle and T. Palmer: International Power Metallurgy Congress and Exhibition, European PM Conference Proceedings, 2015.
28. S. Gangireddy, B. Gwalani, K. Liu, E. J. Faierson and R. S. Mishra: Addit. Manuf., 2019, vol. 26, pp. 53-64.
29. B. Torries and N. Shamsaei: JOM, 2017, vol. 69, pp. 2698-705.10.1007/s11837-017-2625-y ↗
30. B. Zheng, Y. Zhou, J. Smugeresky, J. Schoenung and E. Lavernia: Metall. Trans. A, 2008, vol. 39, pp. 2237-45.10.1007/s11661-008-9566-6 ↗
31. A. Dass and A. Moridi: Coatings, 2019, vol. 9, pp. 418-43.10.3390/coatings9070418 ↗
32. J. Hunt, F. Derguti and I. Todd: Ironmaking & Steelmaking, 2014, vol. 41, pp. 254-56.10.1179/0301923314Z.000000000269 ↗
33. V. Manvatkar, A. Gokhale, G. J. Reddy, A. Venkataramana and A. De: Metall. Trans. A, 2011, vol. 42, pp. 4080-87.10.1007/s11661-011-0787-8 ↗
34. Y. Li, J. Zhou, P. Pavanram, M. Leeflang, L. Fockaert, B. Pouran, N. Tümer, K.-U. Schröder, J. Mol and H. Weinans: Acta Biomater., 2018, vol. 67, pp. 378-92.10.1016/j.actbio.2017.12.008 ↗
35. M. M. Avedesian and H. Baker: ASM Specialty Handbook: Magnesium and Magnesium Alloys. ASM International, Cleveland, 1999.
36. J. Čapek and D. Vojtěch: Mater. Sci. Eng. C., 2013, vol. 33, pp. 564-69.10.1016/j.msec.2012.10.002 ↗
37. G. F. Vandervoort: Metallography, principles and practice. ASM International, Cleveland, 1999.
38. ASTM E8: Standard Test Methods for Tension Testing of Metallic Materials, 2001.
39. ASTM B557: Standard Methods of Tension Testing Wrought and Cast Aluminium and Magnesium Alloy Products, 1993.
40. B. Zheng, Y. Zhou, J. Smugeresky, J. Schoenung and E. Lavernia: Metall. Trans. A, 2008, vol. 39, pp. 2228-36.10.1007/s11661-008-9557-7 ↗
41. J. J. Bhattacharyya, S. Agnew and G. Muralidharan: Acta Mater., 2015, vol. 86, pp. 80-94.10.1016/j.actamat.2014.12.009 ↗
42. M. Hillert: Acta Metall, 1965, vol. 13, pp. 227-38.10.1016/0001-6160(65)90200-2 ↗
43. H. Taheri, M. R. B. M. Shoaib, L. Koester, T. Bigelow, P. C. Collins and L. J. Bond: International Journal of Additive and Subtractive Materials Manufacturing (IJASMM), 2017, vol. 1, pp. 172-209.
44. S. Tammas-Williams, P. Withers, I. Todd and P. Prangnell: Scr. Mater., 2016, vol. 122, pp. 72-76.10.1016/j.scriptamat.2016.05.002 ↗
45. J. Gu, J. Ding, S. W. Williams, H. Gu, P. Ma and Y. Zhai: J. Mater. Process. Technol., 2016, vol. 230, pp. 26-34.10.1016/j.jmatprotec.2015.11.006 ↗
46. H. Jiang, M. Zheng, X. Qiao, K. Wu, Q. Peng, S. Yang, Y. Yuan and J. Luo: Mater. Sci. Eng. A., 2017, vol. 684, pp. 158-64.10.1016/j.msea.2016.11.009 ↗
47. Y. H. Kang, H. Yan and R. S. Chen: Mater. Sci. Eng. A., 2015, vol. 645, pp. 361-68.10.1016/j.msea.2015.08.041 ↗
48. T. Rzychoń, and A. Kiełbus: J. Achiev. Mater. Manuf. Eng., 2007, vol. 21, pp. 31-34.
49. C. Zhang, S. Guan, L. Wang, S. Zhu and L. Chang: J. Mater. Res., 2017, vol. 32, pp. 1061-72.10.1557/jmr.2017.55 ↗
50. P. Mengucci, G. Barucca, G. Riontino, D. Lussana, M. Massazza, R. Ferragut and E. H. Aly: Mater. Sci. Eng. A., 2008, vol. 479, pp. 37-44.10.1016/j.msea.2007.06.016 ↗
51. https://www.luxfermeltechnologies.com/wp-content/uploads/2019/01/113909-Luxfer-MEL-Technologies-DS-467-Elektron-WE43B-ST1.pdf.