journal article·2020-06

Quenching and Partitioning–Based Heat Treatment for Rolled Grinding Steel Balls

V. I. Zurnadzhy, V. G. Efremenko, K. M. Wu, A. G. Lekatou, K. Shimizu, Yu. G. Chabak, D. S. Zotov, E. V. Dunayev

Publisher page

Abstract

A “Quenching and Partitioning” (Q&P)–based heat treatment has been applied to rolled grinding steel (0.75 wt pct C-Mn-Cr) balls of 104-mm diameter to prevent their cracking during heat treatment. The conventional route of ball manufacturing includes rolling, water quenching interrupted when the bulk average temperature is 220 °C to 250 °C, and self-tempering in a large pile. This technology leads to cracking when the balls are made of steel of high hardenability. To overcome this deficiency, the Q&P principle is herein adopted by (a) adjusting the quenching duration to cool the ball center below the martensite start (Ms) temperature and (b) instead of self-tempering applying furnace tempering. The target bulk temperature of the ball that ensures an optimal “martensite/retained austenite” ratio inside the ball at the moment of water quenching interruption is determined as 125 °C to 170 °C. Quenching should be followed by tempering at 200 °C to 250 °C for stress release at the surface and carbon partitioning from martensite to austenite in the core. The resulting microstructure varies from tempered martensite in the “shell” layers to a mixture of martensite-bainite and retained austenite (RA) in the inner zones, where the austenite content is 25 to 30 vol pct. The carbon enrichment in austenite toward the core of the ball leads to balanced stresses and prevention of ball cracking. Q&P-heat-treated balls in an industrial-scale trial attained a uniform hardness of approximately 55 HRC through the cross section and a high fracture resistance under repetitive impacts of 6.8 kJ energy each.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Advanced Surface Polishing Techniques

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. C. Aldrich: Miner. Eng., 2013, vol. 49, pp. 77–91.10.1016/j.mineng.2013.04.023 ↗
2. J.S. Moema, M.J. Papo, G.A. Slabbert, and J. Zimba: Proc. World Gold Conf.-2009, The Southern African Institute of Mining and Metallurgy, Johannesburg, South Africa, 2009, pp. 27–33.
3. A. Sabih, P. Radziszewski, and I. Mullany: Miner. Eng., 2017, vols. 103–104, pp. 43–53.10.1016/j.mineng.2016.08.014 ↗
4. T.W. Chenje, D.J. Simbi, and E. Navara: Miner. Eng., 2003, vol. 16, pp. 1387–90.10.1016/j.mineng.2003.08.009 ↗
5. J.J. Moore, R. Perez, A. Gangopadhyay, and J.F. Eggert: J. Miner. Process., 1988, vol. 22 (1–4), pp. 313–43.10.1016/0301-7516(88)90071-3 ↗
6. Z. Pater: Adv. Sci. Technol. Res. J., 2016, vol. 10 (30), pp. 110–14.10.12913/22998624/62702 ↗
7. A. Muzinda, R. Muvunzi, and C. Maware: Int. J. Eng. Sci. Res. Technol., 2013, vol. 2 (9), pp. 2319–23.
8. S. Aissat, A. Sadeddine, M.A. Bradai, R. Younes, A. Bilek, and A. Benabbas: Met. Sci. Heat Treat., 2017, vol. 59 (5–6), pp. 297–301.10.1007/s11041-017-0146-5 ↗
9. C. Camurri, C. Carrasco, and R. Colàs: Mater. Sci. Forum, 2014, vol. 783, pp. 2260–65.10.4028/www.scientific.net/MSF.783-786.2260 ↗
10. E. Albertin and S.L. de Moraes: Wear, 2007, vol. 263, pp. 43–47.10.1016/j.wear.2007.02.013 ↗
11. V.G. Efremenko, E.S. Popov, S.O. Kuz’Min, O.I. Trufanova, and A.V. Efremenko: Metallurgist, 2014, vol. 57 (9–10), pp. 849–54.10.1007/s11015-014-9812-7 ↗
12. V.G. Efremenko, I.V. Ganoshenko, F.K. Tkachenko, V.A. Zhurba, and O.I. Trufanova: Steel Transl., 2008, vol. 38 (2), pp. 176–78.10.3103/S0967091208020186 ↗
13. F.K. Tkachenko, V.G. Efremenko, S.L. Tikhonyuk, S.I. Degtyarev, and N.N. Vorona: Met. Sci. Heat Treat., 2001, vol. 43 (7–8), pp. 311–13.10.1023/A:1012702125578 ↗
14. T.P. Gulyaeva, T.P. Sedovolosaya, and A.P. Danilov: Ferr. Metall., 1995, vol. 6, p. 75.
15. C. Camurri, C. Carrasco, O. Zapata-Hernàndez, L. Reyes, R. Colàs, and D. Oca: Metall. Ital., 2015, vol. 107 (9), pp. 23–29.
16. J.G. Speer, D.K. Matlock, B.C. De Cooman, and J.G. Schroth: Acta Mater., 2003, vol. 51 (9), pp. 2611–22.10.1016/S1359-6454(03)00059-4 ↗
17. J. Zhang, H. Ding, C. Wang, and T. Ding: Mater. Sci. Eng. A, 2013, vol. 585, pp. 132–38.10.1016/j.msea.2013.07.046 ↗
18. E.A. Ariza, J. Poplawsky, W. Guo, Unocic, A.J. Ramirez, A.P. Tschiptschin, and S.S. Babu: Metall. Mater. Trans. A, 2018, vol. 4A, pp. 4809–23.
19. V.G. Efremenko, V.I. Zurnadzhi, Y.G. Chabak, O.V. Tsvetkova, and A.V. Dzherenova: Mater. Sci., 2017, vol. 53 (1), pp. 67–75.10.1007/s11003-017-0045-3 ↗
20. A.J. Clarke, J.G. Speer, M.K. Miller, R.E. Hackenberg, D.V. Edmonds, D.K. Matlockand, and E. De Moor: Acta Mater., 2008, vol. 56, pp. 16–22.10.1016/j.actamat.2007.08.051 ↗
21. O. Hesse, J. Merker, M. Brykov, and V. Efremenko: Tribol. Schmierungstech., 2013, vol. 60 (6), pp. 37–43.
22. F. Hu, K.M. Wu, and P.D. Hodgson: Mater. Sci. Technol., 2016, vol. 32, pp. 40–48.10.1179/1743284715Y.0000000061 ↗
23. V.G. Efremenko, K. Shimizu, T.V. Pastukhova, Y.G. Chabak, K. Kusumoto, and A.V. Efremenko: J. Frict. Wear, 2017, vol. 38 (1), pp. 58–64.10.3103/S1068366617010056 ↗
24. W. Bleck, X. Guo, and Y. Ma: Steel Res. Int., 2017, 88 (10), 1700218.10.1002/srin.201700218 ↗
25. E. Billur, J. Dykeman, and T. Altan: Stamp. J., 2014, Mar.–Apr., pp. 12–13.
26. X. Han, Y. Zhong, K. Yang, Z. Cui, and J. Chen: Procedia Eng., 2014, vol. 81, pp. 1737–43.10.1016/j.proeng.2014.10.223 ↗
27. L. Wang and J.G. Speer: Metallogr., Microstruct., Anal., 2013, 2 (4), pp. 268–81.10.1007/s13632-013-0082-8 ↗
28. H.Y. Li, X.W. Lu, W.J. Li, and X.J. Jin: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1284–1300.10.1007/s11661-010-0184-8 ↗
29. Y. Toji, G. Miyamoto, and D. Raabe: Acta Mater., 2015, vol. 86, pp.137–47.10.1016/j.actamat.2014.11.049 ↗
30. Y.Z. Zeng, K.M. Wu, F. Hu, and H. Zheng: Adv. Mater. Res., 2012, vols. 538–541, pp. 1053–56.10.4028/www.scientific.net/AMR.538-541.1053 ↗
31. S.G. Liu, S.S. Dong, F. Yang, L. Li, B. Hu, F.H. Xiao, Q. Chen, and H.S. Liu: Mater. Des., 2014, vol. 56, pp. 37–43.10.1016/j.matdes.2013.10.094 ↗
32. X. Jia, X. Zuo, Y. Liu, N. Chen, and Y. Rong: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5514–25.10.1007/s11661-015-3137-4 ↗
33. “Steel Grinding Balls for Ball Mills,” Standard of Ukraine DSTU 8538:2015, 2015.
34. S. Jing and Y. Hao: Mater. Sci. Eng. A, 2013, vol. 586, pp. 100–07.10.1016/j.msea.2013.08.021 ↗
35. C.H. Gur and J. Pan: Handbook of Thermal Process Modeling Steels, CRC Press, Taylor & Francis Group, New York, NY, 2009, pp. 6–8.
36. K.N. Sokolov and I.K. Korotich: Heat Treatment Technology and Design of Heat Treatment Shops, Metallurgia, Moscow, 1988, pp. 369–70 (in Russian).
37. V.G. Efremenko: Bull. Nat. Techn. Univ. “KhPI,” 2001, pp. 78–82 (in Russian).
38. A.E. Nehrenberg: Trans. AIME, 1946, vol. 167, pp. 494–98.
39. O.P. Ostash, V.V. Kulyk, T.M. Lenkovskiy, Z.A. Duriagina, V.V. Vira, and T.L. Tepla: Arch. Mater. Sci. Eng., 2018, vol. 90 (2), pp. 49–55.10.5604/01.3001.0012.0662 ↗
40. D.K. Nesterov, V.E. Sapozhkov, N.F. Levchenko, and V.A. Dubrov: Met. Sci. Heat Treat., 1990, vol. 32 (8), pp. 589–94.10.1007/BF00700711 ↗
41. A. Anishchenko, V. Kukhar, V. Artiukh, and A. Olga: MATEC Web Conf., 2018, vol. 239, p. 06006.10.1051/matecconf/201823906006 ↗
42. R. Blickensderfer and J.H. Tylszak: Miner. Metall. Process., 1989, May, pp. 60–66.10.1007/BF03402527 ↗
43. D.V. Stalinskii, A.S. Rudyuk, and V.K. Solenyi: Steel Transl., 2017, vol. 47 (6), pp. 421–27.10.3103/S0967091217060122 ↗
44. K.-E. Thelning: Steel and Its Heat Treatment, Butterworth-Heinemann, Oxford, United Kingdom, 2000, p. 584.
45. L. Morales-Rivas, C. Garcia-Mateo, T. Sourmail, M. Kuntz, R. Rementeria, and F.G. Caballero: Metals, 2016, vol. 6, p. 302.10.3390/met6120302 ↗
46. V.G. Efremenko, O. Hesse, T. Friedrich, M. Kunert, M.N. Brykov, K. Shimizu, V.I. Zurnadzhy, and P. Šuchmann: Wear, 2019, vols. 418–419, pp. 24–35.10.1016/j.wear.2018.11.003 ↗
47. S. Sharma, S. Sangal, and K. Mondial: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3921–33.10.1007/s11661-011-0797-6 ↗
48. W. Gong, Y. Tomota, S. Harjo, Y.H. Su, and K. Aizawa: Acta Mater., 2015, 85, pp. 243–49.10.1016/j.actamat.2014.11.029 ↗
49. A. Navarro-López, J. Sietsma, and M.J. Santofimia: Metall. Mater. Trans. A, 2016, vol. 47A, pp 1028–39.10.1007/s11661-015-3285-6 ↗
50. W.-S. Li, H.-Y. Gao, Z.-Y. Li, H. Nakashima, S. Hata, and W.-H. Tian: Int. J. Miner. Metall. Mater. 2016, 23 (3), pp. 303–13.10.1007/s12613-016-1239-7 ↗
51. Z.-Q. Liu, G. Miyamoto, Z.-G. Yang, C. Zhang, and T. Furuhara: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 1544–49.10.1007/s11661-015-2744-4 ↗
52. S.Y.P. Allain, S. Gaudez, G. Geandier, J.-C. Hell, M. Gouné, F. Danoix, M. Soler, S. Aoued, and A. Poulon-Quintin: Mater. Sci. Eng. A, 2018, vol. 5, pp. 245–50.10.1016/j.msea.2017.10.105 ↗