journal article·2017-08

Effects of γ′ Precipitation, Dislocation Density, and Grain Size on Stress-Relaxation Properties of INCONEL X-750 Helical Springs

Jeong Won Ha, Baek Seok Seong, Wanchuck Woo, Hi Won Jeong, Yoon Suk Choi, Namhyun Kang

Publisher page

Abstract

INCONEL X-750 specimens were manufactured into helical springs by drawing and coiling followed by aging. They were subsequently subjected to stress-relaxation tests. Stress relaxation is the important property of springs that are compressed at elevated temperatures. To understand stress relaxation, this study investigated the effect of the drawing ratio (DR) on the γ′ size and volume fraction, grain size, carbide volume fraction, and dislocation density. Small-angle neutron scattering was used to measure the size and volume fraction of γ′ phase, and X-ray diffraction was employed to analyze the dislocation density in the springs as a function of the DR. The smallest DR specimen (DR0) had a longer free length than the larger DR specimens (DR17 and DR42) after the stress-relaxation test was completed at 773 K (500 °C) for 300 hours. However, the size and volume fraction of γ′, along with the dislocation density, had no influence on the stress relaxation of the INCONEL X-750 springs. The decreased grain size (d) due to an increase in the DR was the main factor in the increase in the stress relaxation of the springs. The decrease in grain size displayed a nonlinear relationship with the increase in stress relaxation. The stress-relaxation behavior relationship was d −3. Grain boundaries were determined to play a role in dislocation sink via transmission electron microscopy (TEM) observations. Grain boundary diffusion accommodated by slip was responsible for the stress-relaxation properties of the spring at an elevated temperature (773 K = 500 °C).
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Advanced ceramic materials synthesis

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (38)

Show source-provided references
1. C.T. Sims and W.C. Hagel: The Superalloys, John Wiley & Sons, New York, NY, 1972, pp. 7–11.
2. K. Fisher, S. Teysseyre, and E.A. Marquis: INL/CON-12-27984, 2012.
3. G.L. Garner and J.L. Smith: EPRI Report No. RP-2058-4, 1984.
4. R.C. Reed: The Superalloys Fundamentals and Applications, Cambridge University Press, New York, NY, 2006, pp. 236–45.10.1017/CBO9780511541285 ↗
5. J.W. Ha, B.S. Seong, H.W. Jeong, Y.S. Choi, and N. Kang: J. Nucl. Mater., 2015, vol. 457, pp. 362–68.10.1016/j.jnucmat.2014.11.093 ↗
6. K.S. Anil and J.M. John: Metallography, 1986, vol. 19, pp. 75–86.10.1016/0026-0800(86)90008-X ↗
7. G. Lothongkum, W. Khuanlieng, W. Homkrajai, and P. Wangyao: Acta Metall. Slovaca, 2006, vol. 12, pp. 7–13.
8. J.W. Ha, B.S. Seong, H.W. Jeong, Y.S. Yoo, Y.S. Choi, and N. Kang: Mater. Charact., 2014, vol. 96, pp. 1–5.10.1016/j.matchar.2014.07.016 ↗
9. T. Kekkonen and H. Hanninen: Corros. Sci., 1985, vol. 25, pp. 789–803.10.1016/0010-938X(85)90011-3 ↗
10. J. Zrnik, P. Strunz, V. Vrchovinsky, O. Muransky, P. Hornak, and A. Wiedenmann: Key Eng. Mater., 2004, vols. 274–276, pp. 925–30.10.4028/www.scientific.net/KEM.274-276.925 ↗
11. J. Zrnik, P. Strunz, P. Hornak, V. Vrchovinsky, and A. Wiedenmann: Appl. Phys. A, 2002, vol. 74, pp. S1155–S1157.10.1007/s003390101208 ↗
12. G. Lothongkum, W. Khuanlieng, W. Homkrajai, and P. Wangyao: High Temp. Mater. Processes, 2006, vol. 25, pp. 175–85.10.1515/HTMP.2006.25.4.175 ↗
13. W.I. Mitchell: Z. Metallkd., 1966, vol. 57, pp. 586–89.
14. Y.G. Sorokina and S.A. Yuganova: Met. Sci. Heat Treat., 1968, vol. 10, pp. 456–57.10.1007/BF00663717 ↗
15. T.B. Gibbons and B.E. Hopkins: Met. Sci., 1984, vol. 18, pp. 273–80.10.1179/030634584790420104 ↗
16. D.W. Kim, C.H. Han, H.D. Joe, and W.S. Ryu: Proc. Korean Nuclear Society Autumn Meeting, 2003, pp. 35–42.
17. S.M. Hafez Haghighat, G. Eggeler, and D. Raabe: Acta Mater., 2013, vol. 61, pp. 3709–23.10.1016/j.actamat.2013.03.003 ↗
18. N.M. Ghoniem, J.R. Matthews, and R.J. Amodeo: Res. Mechanica, 1990, vol. 29, pp. 197–219.
19. L.Z. He, Q. Zheng, X.F. Sun, G.C. Hou, H.R. Guan, and Z.Q. Hu: J. Mater. Sci., 2005, vol. 40, pp. 2959–64.10.1007/s10853-005-2418-5 ↗
20. J. Zrnik, P. Strunz, V. Vrchovinsky, O. Muransky, Z. Novy, and A. Wiedenmann: Mater. Sci. Eng. A, 2004, vols. 387–389, pp. 728–33.10.1016/j.msea.2004.02.100 ↗
21. R.L. Coble: J. Ann. Phys., 1963, vol. 34, pp. 1679–82.
22. J. Wadsworth, O.A. Ruano, and O.D. Sherby: TMS Annual Meeting, TMS, Warrendale, PA, 1999, pp. 425–39.
23. O.A. Ruano and O.D. Sherby: Mater. Sci. Eng., 1982, vol. 56, pp. 167–75.10.1016/0025-5416(82)90169-0 ↗
24. T. Ungár: JCPDS-International Centre for Diffraction Data, http://www.icdd.com/resources/axa/vol40/v40_612.pdf, 1997.
25. J.D. Kamminga and L.J. Seijbel: J. Res. Nat. Inst. Stand. Technol., 2004, vol. 109, pp. 65–74.10.6028/jres.109.005 ↗
26. W. Woo, L. Balogh, T. Ungár, H. Choo, and Z. Feng: Mater. Sci. Eng. A, 2008, vol. 498, pp. 308–13.10.1016/j.msea.2008.08.007 ↗
27. I.C. Dragomir, D.S. Li, G.A. Castello-Branco, H. Garmestani, R.L. Snyder, G. Ribarik, and T. Ungár: Mater. Charact., 2005, vol. 55, pp. 66–74.10.1016/j.matchar.2005.03.002 ↗
28. J. Gubicza, G. Ribark, G.R. Goren-Muginstein, A.R. Rosen, and T. Ungár: Mater. Sci. Eng. A, 2001, vols. 309–310, pp. 60–63.10.1016/S0921-5093(00)01666-X ↗
29. Japan Society of Spring Engineers: Spring, 4th ed., Maruzen Publishing, Tokyo, 2008, pp. 178–81.
30. P.C. Gope: Machine Design—Fundamentals and Applications, PHI Learning Private Limited, Delhi, India, 2012, pp. 298–99.
31. R.G. Budynas and J.K. Nisbett: Shigley’s Mechanical Engineering Design, 10th ed., McGraw-Hill Education, New York, NY, 2015, pp. 298–99.
32. S. Mannan, S. Patel, and J. deBarbadillo: Superalloys Conference Proceeding, TMS, Warrendale, PA, 2000, pp. 449–58.10.7449/2000/Superalloys_2000_449_458 ↗
33. P.E. Aba-Perea, T. Pirling, and M. Preuss: Mater. Des., 2016, vol. 110, pp. 925–31.10.1016/j.matdes.2016.07.078 ↗
34. E.I. Galindo-Nava, J. Sietsma, and P.E.J. Rivera-Diaz-del-Castillo: http://www.msm.cam.ac.uk/skf/publications/annihilationII_2012.pdf, 2012.
35. B.D. Cullity and S.R. Stock: Elements of X-ray Diffraction, Prentice-Hall Inc., Upper Saddle River, NJ, 2001, pp. 167–71.
36. G.J. Michael: Time Dependent Behaviour-Creep, http://courses.washington.edu/me354a, 2001.
37. J. Pelleg: Mechanical Properties of Materials, Solid Mechanics and Its Applications, Springer, New York, NY, 2013, pp. 296–307.10.1007/978-94-007-4342-7 ↗
38. A.W. Dix and W.F. Savage: Weld. Res. Suppl., 1971, pp. 247s–252s.