journal article·2017-05Open access

An Assessment of the Ductile Fracture Behavior of Hot Isostatically Pressed and Forged 304L Stainless Steel

A. J. Cooper, R. J. Smith, A. H. Sherry

Abstract

Abstract Type 300 austenitic stainless steel manufactured by hot isostatic pressing (HIP) has recently been shown to exhibit subtly different fracture behavior from that of equivalent graded forged steel, whereby the oxygen remaining in the component after HIP manifests itself in the austenite matrix as nonmetallic oxide inclusions. These inclusions facilitate fracture by acting as nucleation sites for the initiation, growth, and coalescence of microvoids in the plastically deforming austenite matrix. Here, we perform analyses based on the Rice–Tracey (RT) void growth model, supported by instrumented Charpy and J-integral fracture toughness testing at ambient temperature, to characterize the degree of void growth ahead of both a V-notch and crack in 304L stainless steel. We show that the hot isostatically pressed (HIP’d) 304L steel exhibits a lower critical void growth at the onset of fracture than that observed in forged 304L steel, which ultimately results in HIP’d steel exhibiting lower fracture toughness at initiation and impact toughness. Although the reduction in toughness of HIP’d steel is not detrimental to its use, due to the steel’s sufficiently high toughness, the study does indicate that HIP’d and forged 304L steel behave as subtly different materials at a microstructural level with respect to their fracture behavior.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metallurgy and Material Forming · Metal Forming Simulation Techniques · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (36)

Show source-provided references
1. H.V. Atkinson and S. Davies: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 2981–3000.10.1007/s11661-000-0078-2 ↗
2. G.A. Rao and M. Kumar: Mater. Sci. Technol., 1997, vol. 13, pp. 1027–31.10.1179/mst.1997.13.12.1027 ↗
3. C. Barre: Adv. Mater. Process., 1999, vol. 155, pp. 47–48.
4. A.S. Helle, K.E. Easterling, and M.F. Ashby: Acta Metall., 1985, vol. 33, pp. 2163–74.10.1016/0001-6160(85)90177-4 ↗
5. Y.C. Jeon and K.T. Kim: Int. J. Mech. Sci., 1999, vol. 41, pp. 815–30.10.1016/S0020-7403(98)00053-8 ↗
6. H.T. Larker and R. Lundberg: J. Eur. Ceram. Soc., 1999, vol. 19, pp. 2367–73.10.1016/S0955-2219(99)00109-0 ↗
7. G. Byrne, M.A. Spence, B. Olsen, P.J. Houghton, and J. McMahon: TWI Paper 19, 1994.
8. A.J. Cooper, N.I. Cooper, A. Bell, J. Dhers, and A.H. Sherry: Metall. Mater. Trans. A, 2015, vol. 46A, pp. 5126–38.10.1007/s11661-015-3140-9 ↗
9. A.J. Cooper, N.I. Cooper, J. Dhers, and A.H. Sherry: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 4467–75.10.1007/s11661-016-3612-6 ↗
10. A.J. Cooper, J. Dhers, and A.H. Sherry: 2016, p. V06AT06A012.
11. P.F. Thomason: Ductile Fracture of Metals, Pergamon Press, Oxford, United Kingdom, 1990.
12. D. François, A. Pineau, and A. Zaoui: Mechanical Behaviour of Materials: Volume II: Fracture Mechanics and Damage, Springer Science & Business Media, Berlin, 2012.10.1007/978-94-007-2546-1 ↗
13. R. Kiran and K. Khandelwal: Eng. Fract. Mech., 2013, vol. 102, pp. 101–17.10.1016/j.engfracmech.2013.02.021 ↗
14. R.W. Bauer and H.G.F. Wilsdorf: Scripta Metall., 1973, vol. 7, pp. 1213–20.10.1016/0036-9748(73)90250-0 ↗
15. A.A. Benzerga, J. Besson, and A. Pineau: J. Eng. Mater. Technol., 1999, vol. 121, pp. 221–29.10.1115/1.2812369 ↗
16. J.R. Rice and D.M. Tracey: J. Mech. Phys. Solids, 1969, vol. 17, pp. 201–17.10.1016/0022-5096(69)90033-7 ↗
17. F.A. McClintock: J. Appl. Mech., 1968, vol. 35, pp. 363–71.10.1115/1.3601204 ↗
18. M.G. Cockcroft and D.J. Latham: J. Inst. Met., 1968, vol. 96, pp. 33–39.
19. A.L. Gurson: J. Eng. Mater. Technol., 1977, vol. 99, pp. 2–15.10.1115/1.3443401 ↗
20. G. Straffelini and V. Fontanari: Eng. Fract. Mech., 2011, vol. 78, pp. 1067–76.10.1016/j.engfracmech.2010.12.009 ↗
21. ASTM E112-13: Standard Test Methods for Determining Average Grain Size, ASTM International, West Conshohocken, PA, 1996.
22. ASTM A370-14: Standard Test Methods and Definitions for Mechanical Testing of Steel Products, ASTM International, West Conshohocken, PA, 2014.
23. ASTM E8/E8M: Standard Test Methods for Tension Testing of Metallic Materials, ASTM International, West Conshohocken, PA, 2010.
24. ASTM E1820: Standard Test Method for Measurement of Fracture Toughness, ASTM International, West Conshohocken, PA, 2003.
25. ASTM E3-11: Standard Practice for Preparation of Metallographic Specimens, ASTM International, West Conshohocken, PA, 2001.
26. F.M. Beremin: IUTAM Symp. on Three-Dimensional Constitutive Relations and Ductile Fracture, North-Holland Publishing Company, Dourdan, France, 1981.
27. T.L. Anderson: Fracture Mechanics: Fundamentals and Applications, CRC Press, Boca Raton, FL, 2005.10.1201/9781420058215 ↗
28. P.S. Follansbee: J. Eng. Mater. Technol., Trans. ASME, 2012, vol. 134.
29. S.S. Hecker, M.G. Stout, K.P. Staudhammer, and J.L. Smith: Metall. Trans. A, 1982, vol. 13A, pp. 619–26.10.1007/BF02644427 ↗
30. W. Lee and C. Lin: Mater. Sci. Eng. A, 2001, vol. 308, pp. 124–35.10.1016/S0921-5093(00)02024-4 ↗
31. L.E. Murr, K.P. Staudhammer, and S.S. Hecker: Metall. Trans. A, 1982, vol. 13A, pp. 627–35.10.1007/BF02644428 ↗
32. S.F. Kane, A.L. Farland, T.A. Siewert, and C.N. McCowan: Weld. J., 1999, vol. 78 (8), pp. 292.s–300.s.
33. BS 7448-4: Fracture Mechanics Toughness Tests—Part 4, 1997.
34. R. Taktak, N. Benseddiq, and A. Imad: Fat. Fract. Eng. Mater. Struct., 2009, vol. 32, pp. 525–30.10.1111/j.1460-2695.2009.01356.x ↗
35. Z. Wang: J. Appl. Phys., 1994, vol. 76, pp. 1535–42.10.1063/1.357730 ↗
36. W. Tong and G. Ravichandran: J. Appl. Mech., 1995, vol. 62, pp. 633–39.10.1115/1.2895993 ↗