Role of the Surface in Solid–Solid Phase Transitions: Molecular Dynamics Study of the α-γ Transition in Fe
Source abstract
Abstract
Using classical molecular dynamics simulation, we study the role of surfaces on solid–solid phase transformations. We contrast the transformation behavior of a thin film (two free surfaces) with a bulk system and with a system containing only one free surface. We focus on bcc Fe and induce the transformation from the bcc to the fcc phase by applying biaxial strain. We find that the critical strain at which the material transforms is independent of whether the system has a free surface or not. However, the nucleation mechanism of the new phase and also the transformation speed are strongly influenced by the existence of surfaces. While bulk systems fail early (after phase transformation to a polycrystal) under the applied load, systems with a free surface show a considerably higher ductility.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: nanoparticles nucleation surface interactions · Advanced Chemical Physics Studies · High-pressure geophysics and materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (52)
Show source-provided references
1. 1.D. A. Porter and K. E. Easterling, Phase transformations in metals and alloys (Chapman & Hall, London, 1992)10.1007/978-1-4899-3051-4 ↗
2. [2] W. Pepperhoff and M. Acet, Constitution and Magnetism of Iron and its Alloys (Springer, Berlin, 2001).10.1007/978-3-662-04345-5 ↗
3. E. Pereloma and D. V. Edmonds, eds: Phase Transformations in Steels: Diffusionless Transformations, High Strength Steels, Modelling and Advanced Analytical Techniques, vol. 2, Woodhead Publishing Limited, Cambridge, U.K., 2012.10.1533/9780857096104 ↗
4. P.E. Blöchl, C. Joachim, and A.J. Fisher, eds: Computations for the Nano-Scale, NATO ASI Series E, vol. 240, Kluwer Academic Press, Dordrecht, 1993.10.1007/978-94-011-1956-6 ↗
5. P.M. Duxbury and T.J. Pence, eds.: Dynamics of Crystal Surfaces and Interfaces, 2nd ed., Plenum Publishing Corporation, New York, 1997.
6. [6] J. A. Venables, Introduction to Surface and Thin Film Processes (Cambridge University Press, Cambridge, 2000).10.1017/CBO9780511755651 ↗
7. [7] L. B. Freund and S. Suresh, Thin Film Materials: Stress, Defect Formation and Surface Evolution (Cambridge University Press, Cambridge, 2003).
8. [8] Q. Mei and K. Lu, Prog. Mater. Sci. 52, 1175 (2007).10.1016/j.pmatsci.2007.01.001 ↗
9. 9.P. Tian, Annu. Rep. Prog. Chem. Sect. C 104: 142 (2008)10.1039/b703897f ↗
10. [10] D. A. Hardwick, Thin Solid Films 154, 109 (1987).10.1016/0040-6090(87)90357-9 ↗
11. 11.R.P. Vinci and J.J. Vlassak: Annu. Rev. Mater. Sci., 1996, vol. 26, pp. 431–62.10.1146/annurev.ms.26.080196.002243 ↗
12. [12] W. Brückner, W. Pitschke, J. Thomas, and G. Leitner, J. Appl. Phys. 87, 2219 (2000).10.1063/1.372164 ↗
13. [13] Y. Ma, A. Setzer, J. W. Gerlach, F. Frost, P. Esquinazi, and S. G. Mayr, Adv. Funct. Mater. 22, 2529 (2012).10.1002/adfm.201103021 ↗
14. J. Ko, T. Bae, and J. Hong, J. Appl. Phys. 112, 113919 (2012).10.1063/1.4769737 ↗
15. 15.T. Edler, S. Hamann, A. Ludwig, and S. G. Mayr, Scripta Mater. 64, 89-92 (2011)10.1016/j.scriptamat.2010.09.013 ↗
16. G. Golan, A. Axelevitch, B. Sigalov, and B. Gorenstein: Microelectron. J., 2003, vol. 34, pp. 255–58.10.1016/S0026-2692(03)00002-8 ↗
17. [17] J. Y. Suh, R. Lopez, L. C. Feldman, and R. F. Haglund, J. Appl. Phys. 96, 1209 (2004).10.1063/1.1762995 ↗
18. W. Liang, M. Zhou, and F. Ke: Nano Lett., 2005, vol. 5, pp. 2039–42.10.1021/nl0515910 ↗
19. [19] H. S. Park, K. Gall, and J. A. Zimmerman, Phys. Rev. Lett. 95, 255504 (2005).10.1103/PhysRevLett.95.255504 ↗
20. [20] W. Liang and M. Zhou, Phys. Rev. B 73, 115409 (2006).10.1103/PhysRevB.73.115409 ↗
21. [21] C. Ji and H. S. Park, Nanotechnology 18, 305704 (2007).10.1088/0957-4484/18/30/305704 ↗
22. [22] B. Wang, E. Sak-Saracino, L. Sandoval, and H. M. Urbassek, Model. Simul. Mater. Sci. Eng. 22, 045003 (2014).10.1088/0965-0393/22/4/045003 ↗
23. [23] F. Ma and K. W. Xu, J. Mater. Res. 22, 1299 (2007).10.1557/jmr.2007.0153 ↗
24. [24] L. Sandoval and H. M. Urbassek, Nano Lett. 9, 2290 (2009).10.1021/nl9004767 ↗
25. [25] L. Sandoval and H. M. Urbassek, Nanotechnology 20, 325704 (2009).10.1088/0957-4484/20/32/325704 ↗
26. [26] L. Sandoval and H. M. Urbassek, Appl. Phys. Lett. 95, 191909 (2009).10.1063/1.3258002 ↗
27. 27.B. R. Cuenya, M. Doi, S. Löbus, R. Courths, and W. Keune, Surf. Sci. 493, 338-60 (2001)10.1016/S0039-6028(01)01239-0 ↗
28. [28] B. Wang and H. M. Urbassek, Model. Simul. Mater. Sci. Eng. 21, 085007 (2013).10.1088/0965-0393/21/8/085007 ↗
29. S. Plimpton: J. Comput. Phys., 1995, vol. 117, pp. 1–19. http://www.lammps.sandia.gov/.
30. [30] C. Engin, L. Sandoval, and H. M. Urbassek, Model. Simul. Mater. Sci. Eng. 16, 035005 (2008).10.1088/0965-0393/16/3/035005 ↗
31. [31] R. Meyer and P. Entel, Phys. Rev. B 57, 5140 (1998).10.1103/PhysRevB.57.5140 ↗
32. [32] L. Sandoval, H. M. Urbassek, and P. Entel, New J. Phys. 11, 103027 (2009).10.1088/1367-2630/11/10/103027 ↗
33. [33] L. Sandoval, H. M. Urbassek, and P. Entel, Phys. Rev. B 80, 214108 (2009).10.1103/PhysRevB.80.214108 ↗
34. H.M. Urbassek and L. Sandoval: in Diffusionless Transformations, High Strength Steels, Modelling and Advanced Analytical Techniques, vol. 2, E. Pereloma and D.V. Edmonds, eds., Woodhead Publishing Limited, Cambridge, U.K., 2012, pp. 433–63.10.1533/9780857096111.3.433 ↗
35. [35] P. Entel, R. Meyer, K. Kadau, H. C. Herper, and E. Hoffmann, Eur. Phys. J. B 5, 379 (1998).10.1007/s100510050457 ↗
36. [36] P. Entel, R. Meyer, and K. Kadau, Philos. Mag. B 80, 183 (2000).10.1080/13642810008208607 ↗
37. P. Entel, M. Kreth, R. Meyer, and K. Kadau: in Modeling and Simulating Materials Nanoworld, P. Vincenzini and F. Zerbetto, eds., Techna Group, Faenza, 2004, p. 101.
38. [38] K. Kadau, R. Meyer, and P. Entel, Surf. Rev. Lett. 6, 35 (1999).10.1142/S0218625X9900007X ↗
39. [39] K. Kadau and P. Entel, J. Magn. Magn. Mater. 198, 531 (1999).10.1016/S0304-8853(98)01237-2 ↗
40. M. Müller, P. Erhart, and K. Albe: J. Phys.: Condens. Matter, 2007, vol. 19, p. 326220.
41. T. Lee, M.I. Baskes, S.M. Valone, and J.D. Doll: J. Phys.: Condens. Matter, 2012, vol. 24, p. 225404.
42. [42] S. J. Wang, H. Wang, K. Du, W. Zhang, M. L. Sui, and S. X. Mao, Nat. Commun. 5, 3433 (2014).10.1038/ncomms4433 ↗
43. B. Wang and H.M. Urbassek: Comput. Mater. Sci., 2014, vol. 81, pp. 170–77.10.1016/j.commatsci.2013.08.005 ↗
44. [44] W. Shinoda, M. Shiga, and M. Mikami, Phys. Rev. B 69, 134103 (2004).10.1103/PhysRevB.69.134103 ↗
45. [45] D. Faken and H. Jonsson, Comput. Mater. Sci. 2, 279 (1994).10.1016/0927-0256(94)90109-0 ↗
46. [46] C. Engin and H. M. Urbassek, Comput. Mater. Sci. 41, 297 (2008).10.1016/j.commatsci.2007.04.019 ↗
47. B. Wang and H. M. Urbassek: Phys. Rev. B, 2013, vol. 87, p. 104108.10.1103/PhysRevB.87.104108 ↗
48. [48] B. Wang and H. M. Urbassek, Acta Mater. 61, 5979 (2013).10.1016/j.actamat.2013.05.045 ↗
49. D. Rittel, G. Ravichandran, and A. Venkert: Mater. Sci. Eng. A, 2006, vol. 432, 191–201.10.1016/j.msea.2006.05.154 ↗
50. [50] L. M. Dougherty, G. T. Gray III, E. K. Cerreta, R. J. McCabe, R. D. Field, and J. F. Bingert, Scripta Materialia 60, 772 (2009).10.1016/j.scriptamat.2009.01.014 ↗
51. [51] B. Wang, E. Sak-Saracino, N. Gunkelmann, and H. M. Urbassek, Comput. Mater. Sci. 82, 399 (2014).10.1016/j.commatsci.2013.09.069 ↗
52. [52] S. Tateyama, Y. Shibuta, and T. Suzuki, Scr. Mater. 59, 971 (2008).10.1016/j.scriptamat.2008.06.054 ↗