journal article·2014-10

An Evaluation of Primary Dendrite Trunk Diameters in Directionally Solidified Al-Si Alloys

S. N. Tewari, R. N. Grugel, D. R. Poirier

Publisher page

Abstract

The primary dendrite trunk diameters of Al-Si alloys that were directionally solidified over a range of processing conditions have been evaluated. The empirical data are analyzed with a model that is an extension of one used to describe the ripening of dendrite arms. The analysis, based primarily on an assessment of secondary dendrite arm dissolution in the mushy zone, fits well with the experimental data. It is suggested that the primary dendrite trunk diameter is a useful metric that correlates well with the actual solidification processing parameters, and complements the conventionally used primary, secondary, and tertiary arm spacings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Aluminum Alloy Microstructure Properties · Metallurgical Processes and Thermodynamics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. M. McLean: Directionally Solidified Materials for High Temperature Service, Book 296, Metals Society, London, U.K., 1983, pp. 11–39.
2. R. Elliott: Eutectic Solidification Processing: Crystalline and Glassy Alloys, Butterworths, London, U.K., 1983, pp. 232–75.10.1016/B978-0-408-10714-3.50011-3 ↗
3. W. Kurz and D.J. Fisher: Fundamentals of Solidification, Switzerland, Trans Tech Publications, 1992, pp. 63–89.
4. R. Trivedi and K. Somboonsuk: Mat. Sci. Eng., 1984, vol. 65, pp. 65–74.10.1016/0025-5416(84)90200-3 ↗
5. D.J. Allen and J.D. Hunt: Metall. Trans. A, 1979, vol. 10A, pp. 1389–97.10.1007/BF02811995 ↗
6. R.N. Grugel: J. Mat. Sci., 1993, vol. 28, pp. 677–83.10.1007/BF01151244 ↗
7. K.A. Jackson, J.D. Hunt, D.R. Uhlmann, T.P. Steward III: Trans. Met. Soc. AIME, 1966, vol. 236, pp. 149–56.
8. S.-Z. Lu and J.D. Hunt: J. Cryst. Growth, 1992, vol. 123, pp. 17–34.10.1016/0022-0248(92)90006-5 ↗
9. R. N. Grugel: Materials Characterization, 1992, vol. 28, pp. 213–19.10.1016/1044-5803(92)90083-T ↗
10. R. N. Grugel: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 496–99.10.1007/BF02664686 ↗
11. R. Trivedi: J. Cryst. Growth, 1980, vol. 49, pp. 210–32.10.1016/0022-0248(80)90157-8 ↗
12. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29, pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
13. R. Trivedi: Metall.Trans. A, 1984, vol. 15A, pp. 977–82.10.1007/BF02644689 ↗
14. S.N. Tewari: Mat. Sci. Eng., 1990, vol. A130, pp. 219–29.10.1016/0921-5093(90)90062-8 ↗
15. J.D. Hunt and S.-Z. Lu: Mat. Sci. and Eng., 1993, vol. A173, pp. 79–83.10.1016/0921-5093(93)90191-G ↗
16. J.D. Hunt and S.-Z. Lu: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 611–22.10.1007/BF02648950 ↗
17. R. A. Pratt and R. N. Grugel: Materials Characterization, 1993, vol. 3, pp. 225–31.10.1016/1044-5803(93)90066-5 ↗
18. M. A. Tschopp, J. D. Miller, A. L. Oppedal and K. N. Solanki: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 426–37.10.1007/s11661-013-1985-3 ↗
19. R.N. Grugel: Unpublished research, Michigan Technological University, Houghton, MI, 1981.
20. D.H. Kirkwood: Mat. Sci. Eng., 1985, vol. 73, pp. L1–L4.10.1016/0025-5416(85)90319-2 ↗
21. H. Esaka: Ph.D. Thesis, No. 615, Swiss Federal Institute of Technology, Lausanne, Switzerland, 1986.
22. K. Somboonsuk, J.T. Mason, and R. Trivedi: Metall. Trans., 1984, vol. 15A pp. 967–75.10.1007/BF02644688 ↗
23. M. Burden, D. Hebditch, and J.D. Hunt: J. Crystal Growth: 1973, vol. 20, pp. 121-24.10.1016/0022-0248(73)90125-5 ↗
24. M.A. Lauer, L. Johnson, M. Ghods, D.R. Poirier, S.N. Tewari, and R.G. Erdmann: Unpublished research, The University of Arizona, Tucson, Arizona 85721.