Mechanism for the Role of Silicon on the Transition from Graphite to Cementite Eutectic in Cast Iron
Source abstract
Abstract
In this work, an analytical solution is proposed to explain the influence of silicon on the transition from graphite to cementite eutectic in cast iron. It is found that this transition can be related to (1) the graphite nucleation potential (directly characterized by the cell count N and indirectly by the nucleation coefficients Ns and b), (2) the growth rate coefficient of graphite eutectic cells μ, (3) the temperature range ΔTsc = Ts – Tc (where Ts and Tc are the equilibrium temperature for graphite eutectic and the formation temperature for cementite eutectic, respectively), and (4) the liquid volume fraction fl after preeutectic austenite solidification. Analytical equations were derived that describe the absolute and the relative chilling tendencies (CT and CTr, respectively) as well as the critical cooling rate Qcr and, hence, the chill w of the cast iron. Theoretical arguments are experimentally verified for castings with various silicon contents. This work also describes the methods used in the determination of Ns, b, and μ values. It is found that the main role of silicon on the transition from graphite to cementite eutectic is to raise the density of the graphite nuclei N and temperature range ΔTsc. In addition, it is shown that increasing the silicon content of cast iron leads to an increasing value of Qcr and decreasing values of CT and CTr, and of the chill width w. In particular, this work shows that the chilling tendency indexes and, hence, the chill all can be estimated from a simple thermal analysis using reference castings.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Iron and Steelmaking Processes
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (26)
Show source-provided references
1. A.G. Fuller: B.C.I.R.A. J., 1961, vol. 9, p. 693.
2. J.W. Boyes and A.G Fuller: B.C.I.R.A. J., 1964, vol. 12, p. 424.
3. N. Girshovitz: Solidification and Properties of Cast Iron, Mashinostroyene, Moscow-Leningrad, Russia, 1966.
4. J.V. Dawson and H. Maitra: Brit. Foundry, 1976, vol. 4, p. 17.
5. O.M. Juarez, R.W. Heine, and J.R. Loper: AFS Trans., 1999, vol. 107, p. 679.
6. E.J. Kubick, A. Javaid, and F.J. Bradley: AFS Trans., 1997, vol. 103, p. 579.
7. D.A. Sparkman and C.A Bhaskaran: AFS Trans., 1996, vol. 104, p. 969.
8. E.J. Kubick, A. Javaid, and F.J. Bradley: AFS Trans., 1997, vol. 103, p. 573.
9. A.G. Fuller: AFS Trans., 1986, vol. 94, p. 863.
10. W. Oldfield: Iron B.C.I.R.A. J., 1962, vol. 10, p. 17.
11. R.B. Gundlach, F. Janovak, S. Becht, and K. Rohrigh: The Physical Metallurgy of Cast Iron, North Holland, New York, NY, 1985, p. 273.
12. F. Neuman: Recent Research on Cast Iron, Gordon and Breach, New York, NY, 1998, p. 659.
13. P. Magnin and W. Kurz: Metall. Trans. A, 1988, vol. 19A, p. 1955.10.1007/BF02645199 ↗
14. E. Fras, K. Wiencek, M. Górny, and H. Lopez: Metall. Mater. Trans. A, 2007, vol. 38A, p. 385.10.1007/s11661-006-9045-x ↗
15. K.A. Jackson and J.D. Hunt: Trans. TMS-AIME, 1966, vol. 236, p. 1129.
16. E. Fras, M. Górny, and H. Lopez: Metall. Mater. Trans. A, 2005, vol. 36A, p. 3075.10.1007/s11661-005-0079-2 ↗
17. S. Wolfram: The Mathematica Book, 4th ed., Wolfram Media/Cabride University Press, New York, NY, 1999.
18. J. Rys: Stereology of Materials, Fotobit, Cracov, Poland, 1995.
19. J. Osher and U. Lorz: Quantitative Gefuengenanalysie, DVG Leipzig-Stuttgard, Germany, 1994.
20. R. Doepp and S. Schwenkel: Mater. Sci. Eng A, 2005, vols. A413–14, pp. 324–38.
21. T. Kanno and T.I. Kikuchi: AFS Trans., 2005, vol. 113, p. 825.
22. R. Heine: AFS Cast. Iron Res. J., 1971, p. 49.
23. E. Fras and M. Gorny: Int. Foundry Res., 2011, vol. 3, p. 2.
24. E. Fras, M. Górny, and H. Lopez: Metall. Mater. Trans. A, 2005, vol. 36A, p. 3083.10.1007/s11661-005-0080-9 ↗
25. P. Magnin and W. Kurz: The Physical Metallurgy of Cast Iron, North-Holland, New York, NY, 1985, p. 263.
26. A. De Sy: Modern Casting, 1997, vol. 52, no. 1, p. 67.