journal article·2023-11Open access

Effect of Nitrogen Pressure and Substrate Bias Voltage on Structure and Mechanical Properties of Vacuum Arc Deposited VN Coatings

A. S. Kuprin, A. Gilewicz, G. N. Tolmachova, I. O. Klimenko, I. V. Kolodiy, R. L. Vasilenko, B. Warcholinski

Abstract

Abstract The binary vanadium–nitrogen (V–N) coatings were formed using cathodic arc evaporation. Two sets of coatings were produced using: (a) nitrogen pressure (pN2) from 0.001 Pa to 3 Pa at a constant substrate bias voltage (UB) of − 100 V and (b) a substrate bias voltage from − 50 to − 300 V at a constant nitrogen pressure of 1.5 Pa. The influence of the above parameters on the coating properties, in particular on the insufficiently investigated and described adhesion of the coatings to the substrate, was demonstrated. The phase transformation V → V + V2N → V + c-VN → h-VN → h-VN + c-VN and c-VN → h-VN occurs for coatings formed with increasing nitrogen pressure and substrate bias voltage, respectively. With the increase in pN2 and UB, an increase in coating hardness and adhesion to the substrate is observed, as well as an improvement in wear resistance.
Source: crossref · Quality: baseline

Research context

OpenAlex topics: Metal and Thin Film Mechanics · Diamond and Carbon-based Materials Research · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (60)

Show source-provided references
1. K. Bobzin, T. Brögelmann, N. Stachowski, W. Hintze, C. Möller, and P. Ploog: Materialwiss. Werkstofftech., 2021, vol. 52, pp. 1394–1412.10.1002/mawe.202100042 ↗
2. A. Wilczek, J. Morgiel, Ł Rogal, W. Maziarz, and J. Smolik: Coatings, 2020, vol. 10(3), p. 261.10.3390/coatings10030261 ↗
3. G. Bertrand, C. Savall, and C. Meunier: Surf. Coat. Technol., 1997, vol. 96, pp. 323–29.10.1016/S0257-8972(97)00184-9 ↗
4. H. Okamoto: J. Phase Equilib., 2001, vol. 22(3), p. 362.10.1361/105497101770338923 ↗
5. G. Farges, E. Beauprez, and D. Degout: Surf. Coat. Technol., 1992, vol. 54–55, pp. 115–20.
6. T. Suszko, W. Gulbiński, A. Urbanowicz, and W. Gulbiński: Mater. Lett., 2011, vol. 65, pp. 2146–48.10.1016/j.matlet.2011.04.038 ↗
7. S. Kolozsvari, P. Pesch, C. Ziebert, M. Stueber, and S. Ulrich: Plasma Process. Polym., 2009, vol. 6, pp. S146–51.10.1002/ppap.200930409 ↗
8. J.C. Caicedo, G. Zambrano, W. Aperador, L. Escobar-Alarcon, and E. Camps: Appl. Surf. Sci., 2011, vol. 258, pp. 312–20.10.1016/j.apsusc.2011.08.057 ↗
9. N. Witit-Anun and A. Buranawong: J. Met. Mater. Miner., 2017, vol. 27, pp. 47–52.
10. J.H. Huang, C.H. Lin, and G.P. Yu: Thin Solid Films, 2019, vol. 688, p. 137415.10.1016/j.tsf.2019.137415 ↗
11. L. Aissani, M. Fellah, A.H. Chadli, M.A. Samad, C. Cheriet, F. Salhi, C. Nouveau, S. Weiß, A. Obrosov, and A. Alhussein: J. Mater. Sci., 2021, vol. 56, pp. 17319–36.10.1007/s10853-021-06393-0 ↗
12. L. Aissani, A. Alhussein, C. Nouveau, L. Ghelani, and M. Zaabat: Surf. Coat. Technol., 2019, vol. 378, p. 124948.10.1016/j.surfcoat.2019.124948 ↗
13. Y. Qiu, S. Zhang, B. Li, J.W. Lee, and D. Zhao: Procedia Eng., 2012, vol. 36, pp. 217–25.10.1016/j.proeng.2012.03.034 ↗
14. H. Gueddaoui, G. Schmerber, M. Abes, M. Guemmaz, and J.C. Parlebas: Catal. Today, 2006, vol. 13, pp. 270–74.10.1016/j.cattod.2005.11.079 ↗
15. S. Bian, L. Yu, J. Xu, H. Ju, J. Wang, and H. Luo: Appl. Phys. A, 2022, vol. 128, p. 249.10.1007/s00339-021-05175-4 ↗
16. Y. Feng, T.F. Chung, and J.H. Huang: Surf. Coat. Technol., 2023, vol. 452, p. 129116.10.1016/j.surfcoat.2022.129116 ↗
17. Z. Cai, J. Pu, L. Wang, and Q. Xue: Appl. Surf. Sci., 2019, vol. 481, pp. 767–76.10.1016/j.apsusc.2019.03.126 ↗
18. Z. Cai, J. Pu, X. Lu, X. Jiang, L. Wang, and Q. Xue: Ceram. Int., 2019, vol. 45, pp. 6051–57.10.1016/j.ceramint.2018.12.076 ↗
19. H. Guo, B. Li, J. Wang, W. Chen, Z. Zhang, W. Wang, and J. Jia: RSC Adv., 2016, vol. 6(40), pp. 33403–08.10.1039/C6RA02403C ↗
20. H. Guo, C. Lu, Z. Zhang, B. Liang, and J. Jia: Appl. Phys. A, 2018, vol. 124, p. 694.10.1007/s00339-018-2055-x ↗
21. U. Wiklund, B. Casas, and N. Stavlid: Wear, 2006, vol. 261, pp. 2–8.10.1016/j.wear.2005.09.003 ↗
22. H. Hajihoseini and J.T. Gudmundsson: J. Phys. D Appl. Phys., 2017, vol. 50, p. 505302.10.1088/1361-6463/aa96f2 ↗
23. L. Wang, S. Zhang, Z. Chen, J. Li, and M. Li: Appl. Surf. Sci., 2012, vol. 258, pp. 3629–36.10.1016/j.apsusc.2011.11.127 ↗
24. R. Fix, R.G. Gordon, and D.M. Hoffman: Chem. Mater., 1993, vol. 5, pp. 614–19.10.1021/cm00029a007 ↗
25. M. Gao, X. Xu, and H. Li: Mater. Lett., 2020, vol. 274, p. 128045.10.1016/j.matlet.2020.128045 ↗
26. S. Heo and W.R. Kim: J. Korean Inst. Surf. Eng., 2021, vol. 54, pp. 139–43.
27. M. Fallqvist and M. Olsson: Wear, 2013, vol. 297, pp. 1111–19.10.1016/j.wear.2012.11.012 ↗
28. F.C. Thompson, F.M. Kustas, K.E. Coulter, and G.A. Crawford: Surf. Coat. Technol., 2021, vol. 422, p. 127507.10.1016/j.surfcoat.2021.127507 ↗
29. Z. Cai, J. Mao, Z. Wang, W. Guo, F. Chen, Y. Dong, P. Zhang, and L. Gu: J. Mater. Eng. Perform., 2023, https://doi.org/10.1007/s11665-023-07908-3.10.1007/s11665-023-07908-3 ↗
30. J. Xu, J. Chen, and L. Yu: Vacuum, 2016, vol. 131, pp. 51–57.10.1016/j.vacuum.2016.05.030 ↗
31. J. Fan, W. Wang, H. Wang, and J. Pu: Tribol. Lett., 2021, vol. 69, p. 154.10.1007/s11249-021-01528-5 ↗
32. M.J. Rivera-Chaverra, D. Escobar, R. Ospina, M. Arroyave-Franco, J.J. Olaya, A. Pardo-Trujillo, and E. Restrepo-Parra: Surf. Interface Anal., 2021, vol. 53, pp. 946–55.10.1002/sia.6997 ↗
33. Q. Cai, X. Bai, and J. Pu: J. Mater. Sci., 2022, vol. 57, pp. 8113–26.10.1007/s10853-022-07153-4 ↗
34. Z.X. Liu, Y. Li, X.H. Xie, J. Qin, and Y. Wang: Ceram. Int., 2021, vol. 47, pp. 25655–63.10.1016/j.ceramint.2021.05.291 ↗
35. T. Suszko, W. Gulbiński, and J. Jagielski: Surf. Coat. Technol., 2005, vol. 194, pp. 319–24.10.1016/j.surfcoat.2004.07.119 ↗
36. J. Zhang, X. Li, X. Dong, H. Dong, A.R. Oganov, and J.M. McMahon: Phys. Rev. B, 2021, vol. 104, p. 134111.10.1103/PhysRevB.104.134111 ↗
37. F. Ge, P. Zhu, F. Meng, Q. Xue, and F. Huang: Surf. Coat. Technol., 2014, vol. 248, pp. 81–90.10.1016/j.surfcoat.2014.03.035 ↗
38. J.H. Huang, L.J. Wei, and I.S. Ting: Mater. Chem. Phys., 2022, vol. 275, p. 125253.10.1016/j.matchemphys.2021.125253 ↗
39. U. Sen, M. Uzun, and S. Sen: Adv. Mater. Res., 2012, vol. 445, pp. 643–48.10.4028/www.scientific.net/AMR.445.643 ↗
40. A.S. Kuprin, V.D. Ovcharenko, A. Gilewicz, G.N. Tolmachova, I.V. Kolodiy, R.L. Vasilenko, T. Kuznetsova, V. Lapitskaya, and B. Warcholinski: Tribol. Int., 2022, vol. 165, p. 107246.10.1016/j.triboint.2021.107246 ↗
41. B. Warcholinski, A. Gilewicz, O. Lupicka, A.S. Kuprin, G.N. Tolmachova, V.D. Ovcharenko, I.V. Kolodiy, M. Sawczak, A.E. Kochmanska, P. Kochmanski, T.A. Kuznetsova, T.I. Zubar, A.L. Khudoley, and S.A. Chizhik: Surf. Coat. Technol., 2017, vol. 309, pp. 920–30.10.1016/j.surfcoat.2016.10.061 ↗
42. N. Vidakis, A. Antoniadis, and N. Bilalis: J. Mater. Process. Technol., 2003, vol. 143–144, pp. 481–85.10.1016/S0924-0136(03)00300-5 ↗
43. S.J. Bull: Tribol. Int., 1997, vol. 30, pp. 491–98.10.1016/S0301-679X(97)00012-1 ↗
44. Y. Mu, M. Liu, and Y. Zhao: Tribol. Int., 2016, vol. 97, pp. 327–36.10.1016/j.triboint.2016.01.054 ↗
45. B. Warcholinski, A. Gilewicz, A.S. Kuprin, and I.V. Kolodiy: T. Nonferr. Metal. Soc., 2019, vol. 29, pp. 799–810.10.1016/S1003-6326(19)64990-3 ↗
46. G.A. Zhang, P.X. Yan, P. Wang, Y.M. Chen, and J.Y. Zhang: Mater. Sci. Eng. A, 2007, vol. 460–461, pp. 301–05.10.1016/j.msea.2007.01.149 ↗
47. X.S. Wan, S.S. Zhao, Y. Yang, J. Gong, and C. Sun: Surf. Coat. Technol., 2010, vol. 204, pp. 1800–10.10.1016/j.surfcoat.2009.11.021 ↗
48. P. Panjan, A. Drnovšek, P. Gselman, M. Čekada, and M. Panjan: Coatings, 2020, vol. 10, p. 447.10.3390/coatings10050447 ↗
49. G.G. Fuentes, R. Rodriguez, J.C. Avelar-Batista, J. Housden, F. Montal’a, L.J. Carreras, A.B. Cristobal, J.J. Damborenea, and T.J. Tate: J. Mater. Proc. Technol., 2006, vol. 167, pp. 415–21.10.1016/j.jmatprotec.2005.06.011 ↗
50. W.J. Chou, G.P. Yu, and J.H. Huang: Surf. Coat. Technol., 2001, vol. 140, pp. 206–14.10.1016/S0257-8972(01)01120-3 ↗
51. K. Valleti, C. Rejin, and S. Joshi: Mater. Sci. Eng. A, 2012, vol. 545, pp. 155–61.10.1016/j.msea.2012.02.098 ↗
52. A. Öztürk, K.V. Ezirmik, K. Kazmanli, M. Ürgen, O.L. Eryilmaz, and A. Erdemir: Tribol. Int., 2008, vol. 41, pp. 49–59.10.1016/j.triboint.2007.04.008 ↗
53. B. Warcholinski, A. Gilewicz, P. Myslinski, E. Dobruchowska, D. Murzynski, Kochmanski, K. Rokosz, S. Raaen: Tribol. Int. 2021, vol. 154, p. 106744.10.1016/j.triboint.2020.106744 ↗
54. J.L. Lin, W.D. Sproul, and J.J. Moore: Surf. Coat. Technol., 2012, vol. 206, pp. 2474–83.10.1016/j.surfcoat.2011.10.053 ↗
55. M. Antonov, H. Afshari, J. Baronins, E. Adoberg, T. Raadik, and I. Hussainova: Tribol. Int., 2018, vol. 118, pp. 500–14.10.1016/j.triboint.2017.05.035 ↗
56. A. Gilewicz, T. Kuznetsova, S. Aizikovich, V. Lapitskaya, A. Khabarava, A. Nikolaev, and B. Warcholinski: Materials, 2021, vol. 14, p. 304.10.3390/ma14020304 ↗
57. A. Leyland and A. Matthews: Wear, 2000, vol. 246, pp. 1–11.10.1016/S0043-1648(00)00488-9 ↗
58. X. Chen, Y. Xi, J. Meng, X. Pang, and H. Yang: J. Alloys Compd., 2016, vol. 665, pp. 210–17.10.1016/j.jallcom.2015.10.076 ↗
59. S.H. Yao and Y.L. Su: Wear, 1997, vol. 212, pp. 85–94.10.1016/S0043-1648(97)00128-2 ↗
60. J. Musil, F. Kunc, H. Zeman, and H. Polakova: Surf. Coat. Technol., 2002, vol. 154, pp. 304–13.10.1016/S0257-8972(01)01714-5 ↗