Mechanical Properties of Ti–5Al–5V–5Mo–3Cr Alloy Sintered From Blended Elemental Powders
Source abstract
Abstract
Abstract The field-assisted sintering technique (FAST) was successfully used to sinter, homogenize, and age the Ti–5Al–5V–5Mo–3Cr (Ti-5553) aerospace alloy from blended elemental powders in a single processing run. Sintering at a comparatively high temperature of 1500 °C assured chemical homogeneity of the material. Subsequently, without cooling to the room temperature, the temperature was lowered to 600 °C for 30 min to provide annealing treatment and to produce a desired lamellarα + βmicrostructure. Using an in-house designed assembly, a fully dense rod of 15 mm in diameter and 70 mm in length was successfully sintered. Microstructural and mechanical properties of the alloy were investigated and compared with the conventionally processed Ti-5553 alloy. A good combination of strength (1183 MPa) and ductility (6 pct) was achieved; these values are fully comparable to the conventional cast, forged, and aged Ti-5553 alloy. It was shown that homogeneous Ti-5553 alloy can be produced by FAST, FAST can instantly provide necessary annealing steps, and the FAST process can be upscaled to produce homogeneous rods.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (36)
Show source-provided references
1. R. Boyer: Miner. Met. Mater. Soc., 1993, pp. 335–46.10.1117/12.154726 ↗
2. N.G. Jones, R.J. Dashwood, M. Jackson, and D. Dye: Acta Mater., 2009, vol. 57, pp. 3830–39.10.1016/j.actamat.2009.04.031 ↗
3. V.N. Moiseyev: Titanium Alloys: Russian Aircraft and Aerospace Applications, CRC Press, Boca Raton, 2005.10.1201/9781420037678 ↗
4. N.G. Jones, R.J. Dashwood, D. Dye, and M. Jackson: Mater. Sci. Eng. A, 2008, vol. 490, pp. 369–77.10.1016/j.msea.2008.01.055 ↗
5. G. Welsch, R. Boyer, and E.W. Collings: Materials Properties Handbook: Titanium Alloys, ASM International, 1993.
6. R.R. Boyer and R.D. Briggs: J. Mater. Eng. Perform., 2005, vol. 14, pp. 681–85.10.1361/105994905X75448 ↗
7. S. Veeck, D. Lee, R. Boyer, and R. Briggs: J. Adv. Mater., 2005, vol. 37, pp. 40–45.
8. Y. Zheng, R.E.A. Williams, J.M. Sosa, Y. Wang, R. Banerjee, and H.L. Fraser: Scr. Mater., 2016, vol. 111, pp. 81–84.10.1016/j.scriptamat.2015.08.019 ↗
9. Y. Zheng, R.E.A. Williams, and H.L. Fraser: Scr. Mater., 2016, vol. 113, pp. 202–05.10.1016/j.scriptamat.2015.10.037 ↗
10. P. Manda, V. Singh, U. Chakkingal, and A.K. Singh: Mater. Charact., 2016, vol. 120, pp. 220–28.10.1016/j.matchar.2016.09.005 ↗
11. S. Xu, Y. Liu, B. Liu, X. Wang, and Z. Chen: Trans. Nonferrous Met. Soc. China, 2018, vol. 28, pp. 273–81.10.1016/S1003-6326(18)64660-6 ↗
12. L. Ren, W. Xiao, W. Han, C. Ma, and L. Zhou: Mater. Charact., 2018, vol. 144, pp. 1–8.10.1016/j.matchar.2018.06.025 ↗
13. S. Shekhar, R. Sarkar, S.K. Kar, and A. Bhattacharjee: Mater. Des., 2015, vol. 66, pp. 596–610.10.1016/j.matdes.2014.04.015 ↗
14. S. Buzolits: Adv. Mater. Process., 2003, vol. 161, p. 53.
15. S. Buzolits and SPS Laboratories, Philadelphia, 2004.
16. GB190609020 (A): 1906.
17. GB190527002 (A): 1906.
18. O. Guillon, J. Gonzalez-Julian, B. Dargatz, T. Kessel, G. Schierning, J. Räthel, and M. Herrmann: Adv. Eng. Mater., 2014, vol. 16, pp. 830–49.10.1002/adem.201300409 ↗
19. U. Anselmi-Tamburini, S. Gennari, J.E. Garay, and Z.A. Munir: Mater. Sci. Eng. A, 2005, vol. 394, pp. 139–48.10.1016/j.msea.2004.11.019 ↗
20. Y.C. Wang, Z.Y. Fu, and Q.J. Zhang: Key Eng. Mater., 2002, vol. 224–226, pp. 717–20.10.4028/www.scientific.net/KEM.224-226.717 ↗
21. A.M. Laptev, M. Bram, K. Vanmeensel, J. Gonzalez-Julian, and O. Guillon: J. Mater. Process. Technol., 2018, vol. 262, pp. 326–39.10.1016/j.jmatprotec.2018.07.008 ↗
22. T. Voisin, L. Durand, N. Karnatak, S. Le Gallet, M. Thomas, Y. Le Berre, J.-F. Castagné, and A. Couret: J. Mater. Process. Technol., 2013, vol. 213, pp. 269–78.10.1016/j.jmatprotec.2012.09.023 ↗
23. E.A. Olevsky, W.L. Bradbury, C.D. Haines, D.G. Martin, and D. Kapoor: J. Am. Ceram. Soc., 2012, vol. 95, pp. 2406–13.10.1111/j.1551-2916.2012.05203.x ↗
24. T. Voisin, J.-P. Monchoux, L. Durand, N. Karnatak, M. Thomas, and A. Couret: Adv. Eng. Mater., 2015, vol. 17, pp. 1408–13.10.1002/adem.201500019 ↗
25. N.S. Weston and M. Jackson: J. Mater. Process. Technol., 2017, vol. 243, pp. 335–46.10.1016/j.jmatprotec.2016.12.013 ↗
26. E. Calvert, B. Wynne, N. Weston, A. Tudball, and M. Jackson: J. Mater. Process. Technol., 2018, vol. 254, pp. 158–70.10.1016/j.jmatprotec.2017.11.035 ↗
27. W. Liu, H. Deng, H. Chen, L. Zhou, H. Zuo, P. Xu, W. Qiu, L. Chen, Y. Wei, Zuxi Xia, H. Peng, and J. Tang: Mater. Sci. Eng. A, 2022, vol. 847, p. 143316.10.1016/j.msea.2022.143316 ↗
28. J. Kozlík, D. Preisler, J. Stráský, T. Košutová, C.A. Corrêa, J. Veselý, L. Bodnárová, F. Lukáč, T. Chráska, and M. Janeček: J. Alloys Compd., 2022, vol. 905, 164259.10.1016/j.jallcom.2022.164259 ↗
29. E.B. Taddei, V.A.R. Henriques, C.R.M. Silva, and C.A.A. Cairo: Mater. Sci. Eng. C, 2004, vol. 24, pp. 683–87.10.1016/j.msec.2004.08.011 ↗
30. A. Terayama, N. Fuyama, Y. Yamashita, I. Ishizaki, and H. Kyogoku: J. Alloys Compd., 2013, vol. 577, pp. S408-412.10.1016/j.jallcom.2011.12.166 ↗
31. J. Kozlík, D. Preisler, J. Stráský, J. Veselý, A. Veverková, T. Chráska, and M. Janeček: Mater. Des., 2021, vol. 198, 109308.10.1016/j.matdes.2020.109308 ↗
32. M.J. Bermingham, S.D. McDonald, M.S. Dargusch, and D.H. StJohn: Mater. Sci. Forum, 2010, vol. 654–656, pp. 1472–75.10.4028/www.scientific.net/MSF.654-656.1472 ↗
33. K. Okazaki, K. Morinaka, and H. Conrad: Trans. Jpn. Inst. Met., 1973, vol. 14, pp. 202–07.10.2320/matertrans1960.14.202 ↗
34. J. Kozlík, H. Becker, J. Stráský, P. Harcuba, and M. Janeček: Mater. Sci. Eng. A, 2020, vol. 772, 138783.10.1016/j.msea.2019.138783 ↗
35. N. Mavros, T. Larimian, J. Esqivel, R.K. Gupta, R. Contieri, and T. Borkar: Mater. Des., 2019, vol. 183, 108163.10.1016/j.matdes.2019.108163 ↗
36. G. Lütjering and J.C. Williams: Titanium, Springer, Berlin, 2007.