journal article·2023-07

Martensite Boundary Characteristics on Cycle- and Time-Dependent Fatigue Crack Growth Paths of Tempered Lath Martensitic Steels in a 90 MPa Gaseous Hydrogen Atmosphere

Tingshu Chen, Motomichi Koyama, Yuhei Ogawa, Hisao Matsunaga, Eiji Akiyama

Publisher page

Abstract

Microstructural paths of hydrogen-assisted fatigue crack growth (HAFCG) in tempered martensitic steels were investigated relying on martensite boundary characteristics. Factors determining the HAFCG paths were tensile strength (TS)-dependent. HAFCG paths occurred preferentially along prior austenite grain boundaries with a brittle trend in 1025-MPa-TS steel. However, 811-MPa-TS steel showed HAFCG predominantly along block boundaries with large plasticity evolution, indicating that the mechanism of HAFCG in lower-TS steel required the assistance of plasticity accumulation during cyclic loadings. Graphical abstract
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Microstructure and Mechanical Properties of Steels · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. S. Morito, H. Tanaka, R. Konishi, T. Furuhara, and T. Maki: Acta Mater., 2003, vol. 51, pp. 1789–99.10.1016/S1359-6454(02)00577-3 ↗
2. H. Kitahara, R. Ueji, N. Tsuji, and Y. Minamino: Acta Mater., 2006, vol. 54, pp. 1279–88.10.1016/j.actamat.2005.11.001 ↗
3. M. Nagumo: Fundamentals of Hydrogen Embrittlement, 1st ed. Springer, Tokyo JPN, 2016.10.1007/978-981-10-0161-1 ↗
4. Y. Murakami and S. Matsuoka: Eng. Fract. Mech., 2010, vol. 77, pp. 1926–40.10.1016/j.engfracmech.2010.04.012 ↗
5. H. Matsumiya, A. Shibata, K. Okada, and N. Tsuji: Int. J. Hydrogen Energy, 2021, vol. 46, pp. 37509–7517.10.1016/j.ijhydene.2021.09.011 ↗
6. L.B. Peral, A. Zafra, S. Blasón, C. Rodríguez, and J. Belzunce: Int. J. Fatigue, 2019, vol. 120, pp. 201–14.10.1016/j.ijfatigue.2018.11.015 ↗
7. S. Matsuoka, H. Matsunaga, J. Yamabe, S. Hamada, and T. Iijima: Trans. JSME (in Japanese), 2017, vol. 83, pp. 17-00264-17–0026410.1299/transjsme.17-00264 ↗
8. A. Setoyama, Y. Ogawa, M. Nakamura, Y. Tanaka, T. Chen, M. Koyama, and H. Matsunaga: Int. J. Fatigue, 2022, vol. 163, p. 107039.10.1016/j.ijfatigue.2022.107039 ↗
9. R.P. Gangloff and B.P. Somerday: Gaseous Hydrogen Embrittlement of Materials in Energy Technologies, vol. 2, Woodhead Publishing Limited, Cambridge (UK), 2012.10.1533/9780857093899 ↗
10. A. Nagao, M.L. Martin, M. Dadfarnia, P. Sofronis, and I.M. Robertson: Acta Mater., 2014, vol. 74, pp. 244–54.10.1016/j.actamat.2014.04.051 ↗
11. M. Wang, E. Akiyama, and K. Tsuzaki: Corros. Sci., 2006, vol. 48, pp. 2189–202.10.1016/j.corsci.2005.07.010 ↗
12. S. Li, G. Zhu, and Y. Kang: J. Alloys Compd., 2016, vol. 675, pp. 104–5.10.1016/j.jallcom.2016.03.100 ↗
13. M. Yang, Y. Zhong, and Y. long Liang: Met. Mater. Int., 2018, vol. 24, pp. 970–80.10.1007/s12540-018-0117-4 ↗
14. ASTM E647−13: Standard Test Method for Measurement of Fatigue Crack Growth Rates, 2014.
15. C. Cayron: J. Appl. Crystallogr., 2007, vol. 40, pp. 1183–88.10.1107/S0021889807048777 ↗
16. P.P. Suikkanen, C. Cayron, A.J. DeArdo, and L.P. Karjalainen: J. Mater. Sci. Technol., 2011, vol. 27, pp. 920–30.10.1016/S1005-0302(11)60165-5 ↗
17. R. Kakimoto, M. Koyama, and K. Tsuzaki: ISIJ Int., 2019, vol. 59, pp. 2334–342.10.2355/isijinternational.ISIJINT-2019-232 ↗
18. N. Allain-Bonasso, F. Wagner, S. Berbenni, and D.P. Field: Mater. Sci. Eng. A, 2012, vol. 548, pp. 56–63.10.1016/j.msea.2012.03.068 ↗
19. Y. Momotani, A. Shibata, T. Yonemura, Y. Bai, and N. Tsuji: Scr. Mater., 2020, vol. 178, pp. 318–23.10.1016/j.scriptamat.2019.11.051 ↗
20. S. Morito, H. Yoshida, T. Maki, and X. Huang: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 237–40.10.1016/j.msea.2005.12.048 ↗
21. A. Shibata, T. Yonemura, Y. Momotani, M. heom Park, S. Takagi, Y. Madi, J. Besson, and N. Tsuji: Acta Mater., 2021, vol. 210, p. 6828.10.1016/j.actamat.2021.116828 ↗
22. Y. Takeda and C.J. McMahon: Metall. Trans. A, 1981, vol. 12A, pp. 1255–66.10.1007/BF02642339 ↗
23. R. Ueji, N. Tsuji, Y. Minamino, and Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177–89.10.1016/S1359-6454(02)00260-4 ↗
24. P. Lejček: Springer Ser. Mater. Sci., 2010, vol. 136, pp. 173–201.10.1007/978-3-642-12505-8_7 ↗
25. M. Yamaguchi, J. Kameda, K.I. Ebihara, M. Itakura, and H. Kaburaki: Philos. Mag., 2012, vol. 92, pp. 1349–68.10.1080/14786435.2011.645077 ↗
26. J. Kameda and C.J. McMahon: Metall. Trans. A, 1983, vol. 14A, pp. 903–11.10.1007/BF02644295 ↗
27. S. Lynch: Corros. Rev., 2012, vol. 30, pp. 105–23.
28. E. Martínez-Pañeda, C.F. Niordson, and R.P. Gangloff: Acta Mater., 2016, vol. 117, pp. 321–2.10.1016/j.actamat.2016.07.022 ↗
29. C.J. McMahon Jr.: Eng. Fract. Mech., 2001, vol. 68, pp. 773–88.10.1016/S0013-7944(00)00124-7 ↗
30. G.L. Pioszak and R.P. Gangloff: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4025–5.10.1007/s11661-017-4156-0 ↗
31. C. Wang, M. Wang, J. Shi, W. Hui, and H. Dong: Scr. Mater., 2008, vol. 58, pp. 492–95.10.1016/j.scriptamat.2007.10.053 ↗
32. K. Okada, A. Shibata, Y. Takeda, and N. Tsuji: Int. J. Fatigue, 2021, vol. 143, p. 105921.10.1016/j.ijfatigue.2020.105921 ↗