Effect of TiC Reinforcement on Densification, Structural Evolution and High-Temperature Oxidation Behaviour of ZrB2-20 vol pct SiC Composite
Source abstract
Abstract
This study aims to develop a novel TiC-doped ZrB2-SiC-TiC composite with enhanced sinterability, densification, phase and microstructural stability and oxidation resistance for high-temperature structural application. Due to 5 vol pct TiC addition, higher sintered density (99.6 pct) was obtained by spark plasma sintering (SPS) at 1700 (^circ{ ext {C}} ), which is about 200 (^circ{ ext {C}} ) less than the SPS processing temperature needed for ZrB2-20 vol pct SiC. The improved sinterability was ascribed to in-situ formation of (Zr,Ti)B2 solid solution in this new ZrB2-20 vol pct SiC-5 vol pct TiC composite. The effect of TiC addition on oxidation kinetics of ZrB2-SiC composites was critically evaluated. Consequent upon oxidation at 1600 (^circ{ ext {C}} ) for 0–240 minutes in static air, relatively low mass gain and thin oxide layer was observed in the TiC-containing composite. Phase and microstructural analyses of the oxidized samples revealed the formation of a protective oxide scale in both composites. Interestingly, the thickness of SiC-depleted region was found to be much lower in ZrB2-SiC-TiC composite, compared to that of ZrB2-SiC binary system.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced ceramic materials synthesis · Advanced materials and composites · MXene and MAX Phase Materials
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (75)
Show source-provided references
1. C.T. Mallak: Acad. Forensic Pathol., 2018, vol. 8, pp. 112–8.10.23907/2018.008 ↗
2. S.M. Johnson: Ultra High Temperature Ceramics Application: Issues and Prospects, in 2nd Ceramic Leadership Summit, Baltimore, MD, 2011, pp. 1–52.
3. W.G. Fahrenholtz, G.E. Hilmas, I.G. Talmy, and J.A. Zaykoski: J. Am. Ceram. Soc., 2007, vol. 90, pp. 1347–64.10.1111/j.1551-2916.2007.01583.x ↗
4. P. Sengupta and I. Manna: Trans. Indian Inst. Met., 2019, vol. 72, pp. 2043–059.10.1007/s12666-019-01598-z ↗
5. P. Sengupta and I. Manna: in Future Landscape of Structural Materials in India. D. Bhattacharjee and S. Chakrabarti, eds., Springer, Singapore, 2022, pp. 79–131.10.1007/978-981-16-8523-1_5 ↗
6. M. Patel, V. Singh, J.J. Reddy, V.V. Bhanu Prasad, and V. Jayaram: Scr. Mater., 2013, vol. 69, pp. 370–73.10.1016/j.scriptamat.2013.05.021 ↗
7. S. Du, L. Xu, X. Zhang, P. Hu, and W. Han: Mater. Chem. Phys., 2009, vol. 116, pp. 348–52.10.1016/j.matchemphys.2009.02.039 ↗
8. D. Sciti, L. Silvestroni, G. Saccone, and D. Alfano: Mater. Chem. Phys., 2013, vol. 137, pp. 834–42.10.1016/j.matchemphys.2012.09.071 ↗
9. S.Q. Guo, T. Nishimura, Y. Kagawa, and J.M. Yang: J. Am. Ceram. Soc., 2008, vol. 91, pp. 2848–55.10.1111/j.1551-2916.2008.02587.x ↗
10. J. Watts, G. Hilmas, W.G. Fahrenholtz, D. Brown, and B. Clausen: J. Eur. Ceram. Soc., 2011, vol. 31, pp. 1811–20.10.1016/j.jeurceramsoc.2011.03.024 ↗
11. E. Zapata-solvas, D.D. Jayaseelan, H.T. Lin, P. Brown, and W.E. Lee: J. Eur. Ceram. Soc., 2013, vol. 33, pp. 1373–86.10.1016/j.jeurceramsoc.2012.12.009 ↗
12. S. Chakraborty, D. Debnath, A.R. Mallick, and P.K. Das: Metall. Mater. Trans. A, 2014, vol. 45, pp. 6277–84.10.1007/s11661-014-2563-z ↗
13. X. Zhao, Z. Chen, H. Wang, Z. Zhang, G. Shao, R. Zhang, B. Fan, H. Lu, H. Xu, and D. Chen: Mater. Chem. Phys., 2020, vol. 240, p. 122061.10.1016/j.matchemphys.2019.122061 ↗
14. L. Xu, Y. Yang, S. Wang, M. Li, J. Xu, Y. Qian, J. Zuo, and D. Zhang: Mater. Chem. Phys., 2019, vol. 223, pp. 53–9.10.1016/j.matchemphys.2018.10.044 ↗
15. A. Rezapour and Z. Balak: Mater. Chem. Phys., 2020, vol. 241, p. 122284.10.1016/j.matchemphys.2019.122284 ↗
16. P. Sengupta, S. Basu, and I. Manna: J. Mater. Sci., 2021, vol. 56, pp. 19029–046.10.1007/s10853-021-06427-7 ↗
17. A. Purwar, R. Mukherjee, K. Ravikumar, S. Ariharan, N.K. Gopinath, and B. Basu: J. Ceram. Soc. Jpn., 2016, vol. 124, pp. 393–402.10.2109/jcersj2.15260 ↗
18. J.K. Sonber, T.S.R.C. Murthy, K. Sairam, A. Nagaraj, S. Majumdar, and V. Kain: Int. J. Refract. Met.Hard Mater., 2018, vol. 70, pp. 56–65.10.1016/j.ijrmhm.2017.09.013 ↗
19. B. Nayebi, Z. Ahmadi, M. Shahedi Asl, S. Parvizi, and M. Shokouhimehr: J. Alloys Compd., 2019, vol. 805, pp. 725–32.10.1016/j.jallcom.2019.07.117 ↗
20. H. Istgaldi, B. Nayebi, Z. Ahmadi, P. Shahi, and M.S. Asl: Ceram. Int., 2020, https://doi.org/10.1016/j.ceramint.2020.06.095.10.1016/j.ceramint.2020.06.095 ↗
21. W.M. Guo and G.J. Zhang: J. Eur. Ceram. Soc., 2010, vol. 30, pp. 2387–95.10.1016/j.jeurceramsoc.2010.01.028 ↗
22. S.N. Karlsdottir and J.W. Halloran: J. Am. Ceram. Soc., 2007, vol. 90, pp. 3233–38.10.1111/j.1551-2916.2007.01861.x ↗
23. W.B. Han, P. Hu, X.H. Zhang, J.C. Han, and S.H. Meng: J. Am. Ceram. Soc., 2008, vol. 91, pp. 3328–34.10.1111/j.1551-2916.2008.02660.x ↗
24. Z. Kováčová, L. Bača, E. Neubauer, and M. Kitzmantel: J. Eur. Ceram. Soc., 2016, vol. 36, pp. 3041–049.10.1016/j.jeurceramsoc.2015.12.028 ↗
25. E. Eakins, D.D. Jayaseelan, and W.E. Lee: Metall. Mater. Trans. A, 2011, vol. 42, pp. 878–87.10.1007/s11661-010-0540-8 ↗
26. M. Wang, C.A. Wang, L. Yu, Y. Huang, and X. Zhang: Int. J. Appl. Ceram. Technol., 2012, vol. 9, pp. 178–85.10.1111/j.1744-7402.2011.02647.x ↗
27. Y.H. Seong and D.K. Kim: Ceram. Int., 2014, vol. 40, pp. 15303–11.10.1016/j.ceramint.2014.07.036 ↗
28. R. Inoue, Y. Arai, and Y. Kubota: Ceram. Int., 2017, vol. 43, pp. 8081–088.10.1016/j.ceramint.2017.03.129 ↗
29. W.G. Fahrenholtz and G.E. Hilmas: Scr. Mater., 2017, vol. 129, pp. 94–9.10.1016/j.scriptamat.2016.10.018 ↗
30. W.G. Fahrenholtz: J. Am. Ceram. Soc., 2007, vol. 90, pp. 143–48.10.1111/j.1551-2916.2006.01329.x ↗
31. Y. Kubota, H. Tanaka, Y. Arai, R. Inoue, Y. Kogo, and K. Goto: J. Eur. Ceram. Soc., 2017, vol. 37, pp. 1187–94.10.1016/j.jeurceramsoc.2016.10.034 ↗
32. R. Inoue, Y. Arai, Y. Kubota, Y. Kogo, and K. Goto: J. Alloys Compd., 2018, vol. 731, pp. 310–17.10.1016/j.jallcom.2017.10.034 ↗
33. L. Silvestroni, H.J. Kleebe, W.G. Fahrenholtz, and J. Watts: Sci. Rep., 2017, vol. 7, pp. 1–8.10.1038/srep40730 ↗
34. J. Zou, V. Rubio, and J. Binner: Acta Mater., 2017, vol. 133, pp. 293–302.10.1016/j.actamat.2017.05.033 ↗
35. D.V. Vedel, O.N. Grigoriev, P.V. Mazur, and A.E. Osipov: Powder Metall. Met. Ceram., 2021, vol. 60, pp. 60–8.10.1007/s11106-021-00215-3 ↗
36. S.M. Arab, M. Shahedi Asl, M. Ghassemi Kakroudi, B. Salahimehr, and K. Mahmoodipour: Int. J. Appl. Ceram. Technol., 2021, vol. 18, pp. 2306–13.10.1111/ijac.13858 ↗
37. P. Sengupta, S.S. Sahoo, A. Bhattacherjee, S. Basu, and I. Manna: J. Alloys Compd., 2020, vol. 850, p. 156668.10.1016/j.jallcom.2020.156668 ↗
38. L. Zhang and N.P. Padture: Acta Mater., 2017, vol. 129, pp. 138–48.10.1016/j.actamat.2017.02.076 ↗
39. J. Zou, G.J. Zhang, C.F. Hu, T. Nishimura, Y. Sakka, J. Vleugels, and O. Van Der Biest: J. Am. Ceram. Soc., 2012, vol. 95, pp. 874–78.10.1111/j.1551-2916.2011.05062.x ↗
40. H. Bin Ma, Z.Y. Man, J.X. Liu, F.F. Xu, and G.J. Zhang: Mater. Des., 2015, vol. 81, pp. 133–40.10.1016/j.matdes.2015.05.038 ↗
41. H. Istgaldi, M. Shahedi Asl, P. Shahi, B. Nayebi, and Z. Ahmadi: Ceram. Int., 2020, vol. 46, pp. 2923–30.10.1016/j.ceramint.2019.09.287 ↗
42. M. Khoeini, A. Nemati, M. Zakeri, and M.S. Asl: Int. J. Refract. Met. Hard Mater., 2019, vol. 81, pp. 189–95.10.1016/j.ijrmhm.2019.02.026 ↗
43. H. Istgaldi, B. Nayebi, Z. Ahmadi, P. Shahi, and M. Shahedi Asl: Ceram. Int., 2020, vol. 46, pp. 23155–64.10.1016/j.ceramint.2020.06.095 ↗
44. R.A. Perez, H. Nakajima, and F. Dyment: Mater. Trans., 2003, vol. 44, pp. 2–13.10.2320/matertrans.44.2 ↗
45. B.R. Golla, A. Mukhopadhyay, B. Basu, and S.K. Thimmappa: Prog. Mater. Sci., 2020, vol. 111, p. 100651.10.1016/j.pmatsci.2020.100651 ↗
46. J.D. Verhoeven: The Periodic Table of the Elements. https://www.webelements.com/. Accessed 26 May 2020.
47. Elements, Atomic Radii and the Periodic Radii. http://crystalmaker.com/support/tutorials/atomic-radii/index.html. Accessed 12 June 2022.
48. T.B. Massalski, H. Okamoto, P.R. Subramanian, L. Kacprzak: in Binary Alloy Phase Diagrams, 2nd ed. ASM International, Metals Park, 1990.
49. I. Thibon, D. Ansel, and T. Gloriant: J. Alloys Compd., 2009, vol. 470, pp. 127–33.10.1016/j.jallcom.2008.02.082 ↗
50. P. Villars (Chief Editor): ZrB2 Crystal Structure. https://materials.springer.com/isp/crystallographic/docs/sd_0251829. Accessed 12 June 2022.
51. G.M. Hood, H. Zou, R.J. Schultz, E.H. Bromley, and J.A. Jackman: J. Nucl. Mater., 1994, vol. 217, pp. 229–32.10.1016/0022-3115(94)90371-9 ↗
52. T. Fukunaga, K. Itoh, K. Hashi, and K. Aoki: Appl. Phys. A, 2002, vol. 959, pp. S957-959.10.1007/s003390201558 ↗
53. M.A. Turchanin, P.G. Agraval, and A.R. Abdulov: Powder Metall. Met. Ceram., 2008, vol. 47, pp. 428–46.10.1007/s11106-008-9039-x ↗
54. D.L. McClane, W.G. Fahrenholtz, and G.E. Hilmas: J. Am. Ceram. Soc., 2014, vol. 97, pp. 1552–8.10.1111/jace.12893 ↗
55. E. Zapata-Solvas, D.D. Jayaseelan, P.M. Brown, and W.E. Lee: J. Eur. Ceram. Soc., 2014, vol. 34, pp. 3535–48.10.1016/j.jeurceramsoc.2014.06.004 ↗
56. T.A. Parthasarathy, R.A. Rapp, M. Opeka, and R.J. Kerans: Mater. Sci. Forum, 2008, vol. 595–598, pp. 823–32.10.4028/www.scientific.net/MSF.595-598.823 ↗
57. R. Inoue, Y. Arai, Y. Kubota, Y. Kogo, and K. Goto: J. Mater. Sci., 2018, vol. 53, pp. 14885–906.10.1007/s10853-018-2601-0 ↗
58. E.J. Opila and M.C. Halbig: in 25th Annual Conference on Composites, Advanced Ceramics, Materials, and Structures: A: Ceramic Engineering and Science Proceedings. M. Singh and T. Jessen, eds., 2001, pp. 221–28.
59. S.R. Levine, E.J. Opila, M.C. Halbig, J.D. Kiser, M. Singh, and J.A. Salem: J. Eur. Ceram. Soc., 2002, vol. 22, pp. 2757–67.10.1016/S0955-2219(02)00140-1 ↗
60. S.K. Kashyap, K. Sala, and R. Mitra: Metall. Mater. Trans. A, 2022, vol. 53, pp. 147–71.10.1007/s11661-021-06501-4 ↗
61. M. Patel, V. Singh, and V.V.B. Prasad: Oxid. Met., 2016, vol. 86, pp. 339–56.10.1007/s11085-016-9640-1 ↗
62. J.K. Sonber, T.S.R.C. Murthy, C. Subramanian, S. Kumar, R.K. Fotedar, and A.K. Suri: Int. J. Refract. Met. Hard Mater., 2011, vol. 29, pp. 21–30.10.1016/j.ijrmhm.2010.06.007 ↗
63. T.A. Parthasarathy, R.A. Rapp, M. Opeka, and R.J. Kerans: Acta Mater., 2007, vol. 55, pp. 5999–6010.10.1016/j.actamat.2007.07.027 ↗
64. P. Sengupta, A. Bhattacharjee, and H.S. Maiti: Trans. Indian Inst. Met., 2019, vol. 72, pp. 1981–98.10.1007/s12666-019-01742-9 ↗
65. J. Hlavac: Pure Appl Chem., 1982, vol. 54, pp. 681–88.10.1351/pac198254030681 ↗
66. S. Shimada and M. Kozeki: J. Mater. Sci., 1992, vol. 27, pp. 1869–75.10.1007/BF01107214 ↗
67. M. Gherrab, V. Garnier, S. Gavarini, N. Millard-pinard, and S. Cardinal: Int. J. Refract. Metals Hard Mater., 2013, vol. 41, pp. 590–96.10.1016/j.ijrmhm.2013.07.012 ↗
68. A. Kulpa and T. Troczynski: J. Am. Ceram. Soc., 1996, vol. 79, pp. 518–20.10.1111/j.1151-2916.1996.tb08157.x ↗
69. A. Tampieri and A. Bellosi: J. Mater. Sci., 1993, vol. 28, pp. 649–53.10.1007/BF01151240 ↗
70. L. Silvestroni, K. Stricker, D. Sciti, and H.J. Kleebe: Acta Mater., 2018, vol. 151, pp. 216–28.10.1016/j.actamat.2018.03.042 ↗
71. D. Gao, Y. Zhang, J. Fu, C. Xu, Y. Song, and X. Shi: Corros. Sci., 2010, vol. 52, pp. 3297–303.10.1016/j.corsci.2010.06.004 ↗
72. M. Kazemzadeh Dehdashti, W.G. Fahrenholtz, and G.E. Hilmas: J. Eur. Ceram. Soc., 2013, vol. 33, pp. 1591–598.10.1016/j.jeurceramsoc.2013.01.033 ↗
73. S.K. Thimmappa and B.R. Golla: Ceram. Int., 2019, vol. 45, pp. 13799–808.10.1016/j.ceramint.2019.04.076 ↗
74. I.G. Talmy, J.A. Zaykoski, and M.M. Opeka: J. Am. Ceram. Soc., 2008, vol. 91, pp. 2250–57.10.1111/j.1551-2916.2008.02420.x ↗
75. L. Silvestroni and H.J. Kleebe: J. Eur. Ceram. Soc., 2017, vol. 37, pp. 1899–908.10.1016/j.jeurceramsoc.2017.01.020 ↗