journal article·2023-02

Snoek-Dominated Internal Friction Response in bcc Steel: Relating Experiments With a Multi-scale Atomistic Computational Framework

Sanjay Manda, Saurabh Kumar, Kaushik Pal, Arup R. Bhattacharyya, Ajay S. Panwar, Indradev Samajdar

Publisher page

Abstract

Internal friction is often sensitive to microstructural features. However, there is a clear absence of rational approach for decoupling internal friction spectra for diverse microstructural inputs. In this study, a robust multi-scale atomistic computational framework, combining atomistic kinetic Monte Carlo and molecular dynamics simulations, has been proposed. Predictions from our simulations were then compared with careful experiments on engineered microstructures in bcc steel. Specifically, theoretical contributions from interstitial solute type and concentration, crystallographic orientation, and residual stress (RS), were compared to actual experimental results. The atomistic computational framework successfully demonstrated that the overall internal friction response was composed, almost entirely, of Snoek relaxations from interstitial atoms. Ideal single-crystal simulations correctly predicted peak dissipation temperatures and Snoek peak height, ({ ext{tan}}{delta }_{ ext{max}}), when compared with available single-crystal experimental data. The simulations also captured the correct experimental trends with residual stress and crystallographic orientation in polycrystalline bcc steel. In particular, both RS and crystallographic orientation affected internal friction response by altering diffusion barriers for interstitial migration. Our study, thus, established that an integrated computational framework, supported with careful experiments, can be extremely effective in decoupling various microstructural inputs to complex experimental internal friction spectrum.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Nuclear Materials and Properties · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (70)

Show source-provided references
1. P. Shewmon: Diffusion in Solids, 2nd ed. Springer, New York, 2016, pp. 53–96.10.1007/978-3-319-48206-4 ↗
2. A.S. Nowick and B.S. Berry: Anelastic Relaxation in Crystalline Solids, Academic Press, New York, London, 1972, pp. 1–29.
3. M.S. Blanter, I.S. Golovin, H. Neuhauser, and H.-R. Sinning: Internal Friction in Metallic Materials, Springer, New York, 2007, pp. 1–90.10.1007/978-3-540-68758-0 ↗
4. L. Vandewalle, M.J. Konstantinović, T. Depover, and K. Verbeken: Steel Res. Int., 2021, vol. 92, p. 2100037.10.1002/srin.202100037 ↗
5. S. Teus, V. Shyvaniuk, and V. Gavriljuk: Acta Mater., 2006, vol. 54, pp. 3773–78.10.1016/j.actamat.2006.04.008 ↗
6. H. Saitoh and K. Ushioda: Mater. Trans. JIM, 1993, vol. 34, pp. 13–19.10.2320/matertrans1989.34.13 ↗
7. J.L. Snoek: Physica, 1941, vol. 8, pp. 711–33.10.1016/S0031-8914(41)90517-7 ↗
8. M. Weller: J. Phys. Colloq., 1985, vol. 46, pp. 7–14.
9. C.S. Becquart, J.M. Raulot, G. Bencteux, C. Domain, M. Perez, S. Garruchet, and H. Nguyen: Comput. Mater. Sci, 2007, vol. 40, pp. 119–29.10.1016/j.commatsci.2006.11.005 ↗
10. S. Garruchet and M. Perez: Comput. Mater. Sci, 2008, vol. 43, pp. 286–92.10.1016/j.commatsci.2007.11.004 ↗
11. H. Ino, S. Takagi, and T. Sugeno: Acta Metall., 1967, vol. 15, pp. 29–34.10.1016/0001-6160(67)90152-6 ↗
12. H. Ino and Y. Inokuti: Acta Metall., 1972, vol. 20, pp. 157–63.10.1016/0001-6160(72)90123-X ↗
13. K. Eloot, L. Kestens, and J. Dilewijns: ISIJ Int., 1997, vol. 37, pp. 615–22.10.2355/isijinternational.37.615 ↗
14. X. Lu, J. Mingjiang, H. Zhao, W. Li, and X. Jin: Solid State Commun., 2014, vol. 195, pp. 31–34.10.1016/j.ssc.2014.06.018 ↗
15. S.A. Kim and W.L. Johnson: Mater. Sci. Eng. A, 2007, vol. 452–453, pp. 633–39.10.1016/j.msea.2006.11.147 ↗
16. I. Tkalcec and D. Mari: Mater. Sci. Eng. A, 2004, vol. 370, pp. 213–17.10.1016/j.msea.2003.04.004 ↗
17. W.S. Choi, J. Lee, and B.C. De Cooman: Mater. Sci. Eng. A, 2015, vol. 639, pp. 439–47.10.1016/j.msea.2015.05.055 ↗
18. Q. Kong, W. Jiang, Y. Shi, P. Cui, Q.F. Fang, and M. Winning: Mater. Sci. Eng. A, 2009, vol. 521, pp. 128–33.10.1016/j.msea.2008.09.118 ↗
19. Z.M. Farid, S. Saleh, and S.A. Mahmoud: Mater. Sci. Eng. A, 1989, vol. 110, pp. L31-34.10.1016/0921-5093(89)90185-8 ↗
20. C. Zener: Physica, 1949, vol. XV(1–2), pp. 111–18.10.1016/0031-8914(49)90033-6 ↗
21. A.L. Kimball and D.E. Lovell: Phys. Rev., 1927, vol. 30, pp. 948–59.10.1103/PhysRev.30.948 ↗
22. C. Zener: Phys. Rev., 1938, vol. 53, pp. 90–99.10.1103/PhysRev.53.90 ↗
23. T'ing-Sui Kê: J. Appl. Phys., 1950, vol. 21, pp. 414–19.10.1063/1.1699675 ↗
24. A. Granato and K. Lücke: J. Appl. Phys., 1956, vol. 27, pp. 789–805.10.1063/1.1722485 ↗
25. J. Woirgard, Y. Sarrazin, and H. Chaumet: Rev. Sci. Instrum., 1977, vol. 48, pp. 1322–25.10.1063/1.1134874 ↗
26. G. Fantozzi, C. Esnouf, W. Benoit, and I.G. Ritchie: Prog. Mater Sci., 1982, vol. 27, pp. 311–451.10.1016/0079-6425(82)90003-2 ↗
27. G. Cagnoli, L. Gammaitoni, J. Kovalik, F. Marchesoni, and M. Punturo: Phys. Lett. A, 1999, vol. 255, pp. 230–35.10.1016/S0375-9601(99)00184-X ↗
28. C. Segui, E. Cesari, J. Pons, and V. Chernenko: Mater. Sci. Eng. A, 2004, vol. 370, pp. 481–84.10.1016/j.msea.2003.07.008 ↗
29. P. Maugis: Materialia, 2020, vol. 12, p. 100805.10.1016/j.mtla.2020.100805 ↗
30. D. Mukherjee, U. Tewary, S. Kumar, S. Karagadde, R.K. Verma, M. Sambandam, and I. Samajdar: Mater. Sci. Technol., 2020, vol. 36, pp. 1020–36.10.1080/02670836.2020.1746537 ↗
31. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 5317–31.10.1007/s11661-017-4280-x ↗
32. I. Samajdar, B. Verlinden, and P. Van Houtte: Acta Mater., 1998, vol. 46, pp. 2751–63.10.1016/S1359-6454(97)00466-7 ↗
33. I. Samajdar, B. Verlinden, L. Kestens, and P. Van Houtte: Acta Mater., 1998, vol. 47, pp. 55–65.10.1016/S1359-6454(98)00337-1 ↗
34. W.B. Hutchinson: Int. Met. Rev., 1984, vol. 29, pp. 25–42.10.1179/imtr.1984.29.1.25 ↗
35. B. Verlinden, J. Driver, I. Samajdar and R. Doherty: Thermo-Mechanical Processing of Metallic Materials, Pergamon Materials Series, Oxford, 2007, pp. 153–83.
36. H.K. Mehtani, M.I. Khan, P. Raut, S. Parida, M.J.N.V. Prasad, D. Fullwood, R.D. Doherty, and I. Samajdar: Oxid. Met., 2022, vol. 97, pp. 417–40.10.1007/s11085-022-10099-2 ↗
37. H. Saitoh, N. Yoshinaga, and K. Ushioda: Acta Mater., 2004, vol. 52, pp. 1255–61.10.1016/j.actamat.2003.11.009 ↗
38. H.J. Bunge: Texture Analysis in Materials Science: Mathematical Methods, Elsevier, Amsterdam, 2013, pp. 1–46.
39. H. Mehtani, I. Khan, A. Durgaprasad, S.K. Deb, S. Parida, P. Mjnv, D. Fullwood, R.D. Doherty, and I. Samajdar: Acta Mater., 2020, vol. 190, pp. 43–57.10.1016/j.actamat.2020.03.019 ↗
40. F. Bachmann, R. Hielscher, and H. Schaeben: Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
41. K. Thool, K. Krishna, D. Srivastava, A. Patra, R. Doherty, and I. Samajdar: Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5000–14.10.1007/s11661-019-05412-9 ↗
42. M. Fukuhara and A. Sanpei: ISIJ Int., 1993, vol. 33, pp. 508–12.10.2355/isijinternational.33.508 ↗
43. S. Plimpton: J. Comput. Phys., 1995, vol. 117, pp. 1–9.10.1006/jcph.1995.1039 ↗
44. P. Kratzer: Multiscale Simul Methods Mol Sci, 2009, vol. 42, pp. 51–76.
45. A.F. Voter: Springer, 2005, vol., pp. 1–24.10.1016/j.amj.2004.10.009 ↗
46. A. Bortz, M. Kalos, and J. Lebowitz: J. Comput. Phys., 1975, vol. 17, pp. 10–18.10.1016/0021-9991(75)90060-1 ↗
47. A. Franck: Handbuch Naturschutz und Landschaftspflege, Wiley, Weinheim, 2004, pp. 1–8.10.1002/9783527678471.hbnl2006003 ↗
48. B.-J. Lee, T.-H. Lee, and S.-J. Kim: Acta Mater., 2006, vol. 54, pp. 4597–607.10.1016/j.actamat.2006.06.003 ↗
49. A. Durgaprasad, S. Giri, S. Lenka, S. Kundu, S. Mishra, S. Chandra, R.D. Doherty, and I. Samajdar: Acta Mater., 2017, vol. 129, pp. 278–89.10.1016/j.actamat.2017.02.008 ↗
50. M.I. Khan, A. Prakash, H.K. Mehtani, P. Raut, N.N. Pai, A. Sarkar, M.J.N.V. Prasad, S. Parida, and I. Samajdar: Metall. Mater. Trans. A, 2021, vol. 52A, pp. 4597–608.10.1007/s11661-021-06412-4 ↗
51. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, S.M. Keralavarma, A.A. Benzerga, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 5038–55.10.1007/s11661-019-05421-8 ↗
52. J.L.U. Welzel, P. Lamparter, A.C. Vermeulen, and E.J. Mittemeijer: J. Appl. Cryst., 2005, vol. 38, pp. 1–29.10.1107/S0021889804029516 ↗
53. L. Baker, J. Parker, and S. Daniel: J. Mater. Process. Technol., 2003, vol. 143, pp. 442–47.10.1016/S0924-0136(03)00431-X ↗
54. B. Cao, R. Schaller, W. Benoit, and F. Cosandey: J. Alloys Compd., 1994, vol. 211–212, pp. 118–23.10.1016/0925-8388(94)90462-6 ↗
55. J. Hoyos Quintero, A.A. Ghilarducci, and D. Mari: Mater. Sci. Eng. A, 2015, vol. 640, pp. 460–64.10.1016/j.msea.2015.06.025 ↗
56. V.G. Gavriljuk: Scr. Mater., 2001, vol. 45, pp. 1469–72.10.1016/S1359-6462(01)01185-X ↗
57. S. Pereyra and A.A. Ghilarducci: Scr. Metall., 1991, vol. 25, pp. 2193–98.10.1016/0956-716X(91)90298-F ↗
58. X. Liu, M. Shiwa, K. Sawada, H. Yamawaki, M. Watanabe, and F. Yin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 6741–44.10.1016/j.msea.2010.07.015 ↗
59. J. Cost: J. Phys. Colloq., 1985, vol. 46, pp. C10-31-10–34.
60. K. Tanaka: J. Phys. Soc. Jpn., 1971, vol. 30, pp. 404–11.10.1143/JPSJ.30.404 ↗
61. E. Lenz and W. Dahl: Arch. Eisenhüttenwesen, 1974, vol. 45, pp. 541–44.10.1002/srin.197403918 ↗
62. P. Houtte, K. Van Acker, and J. Root: Textures Microstruct., 1996, vol. 33, pp. 187–206.10.1155/TSM.33.187 ↗
63. P.S. Prevey: X-Ray Diffraction Residual Stress Techniques, American Society for Metals, New York, 1986, pp. 1–50.
64. D.S. Tchitchekova, J. Morthomas, F. Ribeiro, R. Ducher, and M. Perez: J. Chem. Phys., 2014, vol. 141, p. 034118.10.1063/1.4889854 ↗
65. R. Kuzka, J. Moron, and J. Wroblewski: Arch Naucki Materialach, 1983, vol. 4, pp. 161–203.
66. V. Randle and O. Engler: Introduction to Texture Analysis, Taylor and Francis Group, Boca Raton, 2010, pp. 1–40.
67. A. Lodh, U. Tewary, R.P. Singh, T.N. Tak, A. Prakash, A. Alankar, P.J. Guruprasad, and I. Samajdar: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 5946–52.10.1007/s11661-018-4964-x ↗
68. C. Zener: Phys. Rev., 1941, vol. 60, pp. 906–08.10.1103/PhysRev.60.906 ↗
69. G. Lagerberg and Å. Josefsson: Acta Metall., 1955, vol. 3, pp. 236–44.10.1016/0001-6160(55)90058-4 ↗
70. M.S. Ahmad and Z.C. Szkopiak: J. Mater. Sci., 1972, vol. 7, pp. 701–07.10.1007/BF00549383 ↗