journal article·2022-12

Mechanical, Morphological, and Microstructural Characterization of Additively Manufactured Inconel 718 After Laser Surface Remelting at Different Scan Speeds

Nicholas Brooks, Luke Porter, Majid Vaseghi, Anthony Palazotto, Keivan Davami

Publisher page

Abstract

Laser surface remelting is a laser engineering technique used to improve the surface and subsurface mechanical and microstructural properties of additively manufactured metals through grain refinement, selective heat treatment, and the process of re-solidification. It is a promising post-processing technique for many different additive manufacturing laser powder bed fusion processes due to its high accuracy and flexibility within the manufacturing cycle. Nickel-based superalloys like Inconel 718, which are often used in turbine blades, are particularly suitable for laser surface remelting due to their complex geometries and the flexibility that laser surface remelting provides. Studying the microstructural and mechanical alterations that result from laser surface remelting is crucial to advancing and better understanding how laser surface modification techniques can improve additively manufactured alloys. In this study, mechanical and microstructural analysis techniques such as nanoindentation, scanning electron microscopy, and electron backscatter diffraction were utilized to investigate the effects of laser surface remelting on additively manufactured Inconel 718. The subsurface of the laser-remelted material exhibited decreases in nanohardness up to approximately 20 pct which was primarily attributed to increased dendritic spacing that resulted from re-solidification of the laser remelted region in addition to the columniation of epitaxial grains towards the highest temperature within the thermal gradient. This study investigated the laser remelting process at a laser power of 160 W along a single pass with scan speeds between 3 and 42 mm/s. An inverse relationship between the scan speeds during the remelting procedure and the size of the remelted zones was also exhibited, which was related to the cooling rates at different laser fluences which greatly influenced the thermal gradient within the remelted zone.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Entropy Alloys Studies · Additive Manufacturing and 3D Printing Technologies

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (55)

Show source-provided references
1. S. Sanchez, P. Smith, Z. Xu, G. Gaspard, C.J. Hyde, W.W. Wits, I.A. Ashcroft, H. Chen, and A.T. Clare: Int. J. Mach. Tools Manuf., 2021, vol. 165, p. 103729.10.1016/j.ijmachtools.2021.103729 ↗
2. H. Zhang, C. Li, Y. Liu, Q. Guo, and H. Li: Mater. Sci. Eng. A, 2016, vol. 677, pp. 515–21.10.1016/j.msea.2016.09.088 ↗
3. Y. Ning, S. Huang, M.W. Fu, and J. Dong: Mater. Charact., 2015, vol. 109, pp. 36–42.10.1016/j.matchar.2015.09.011 ↗
4. A. Thomas, M. El-Wahabi, J.M. Cabrera, and J.M. Prado: J. Mater. Process., 2006, vol. 177(1–3), pp. 469–72.10.1016/j.jmatprotec.2006.04.072 ↗
5. R. Ran, Y. Wang, Y. Zhang, F. Fang, H. Wang, G. Yuan, and G. Wang: Mater. Sci. Eng. A, 2020, vol. 793, p. 139860.10.1016/j.msea.2020.139860 ↗
6. L.-S.-B. Ling, Z. Yin, Z. Hu, J.-H. Liang, Z.-Y. Wang, J. Wang, and B.-D. Sun: Materials, 2019, vol. 13(1), p. 151.10.3390/ma13010151 ↗
7. A. Balan, M. Perez, T. Chaise, S. Cazottes, D. Bardel, F. Corpace, F. Pichot, A. Deschamps, F. De Geuser, and D. Nelias: Materialia, 2021, vol. 20, p. 101187.10.1016/j.mtla.2021.101187 ↗
8. D. Zhang, W. Niu, X. Cao, and Z. Liu: Mater. Sci. Eng. A, 2015, vol. 644, pp. 32–40.10.1016/j.msea.2015.06.021 ↗
9. V.A. Popovich, E.V. Borisov, A.A. Popovich, V.S. Sufiiarov, D.V. Masaylo, and L. Alzina: Mater. Des., 2017, vol. 131, pp. 12–22.10.1016/j.matdes.2017.05.065 ↗
10. W.M. Tucho, P. Cuvillier, A. Sjolyst-Kverneland, and V. Hansen: Mater. Sci. Eng. A, 2017, vol. 689, pp. 220–32.10.1016/j.msea.2017.02.062 ↗
11. Paulonis, D. F., & Schirra, J. J.: Superalloys 718, 625, 706 and Various Derivatives, 2001.
12. D.A. Lesyk, S. Martinez, B.N. Mordyuk, V.V. Dzhemelinskyi, A. Lamikiz, and G.I. Prokopenko: Surf. Coat. Technol., 2020, vol. 381, p. 125136.10.1016/j.surfcoat.2019.125136 ↗
13. F. Caiazzo, V. Alfieri, G. Corrado, and P. Argenio: Int. J. Adv. Manuf. Technol., 2017, vol. 93(9–12), pp. 4023–31.10.1007/s00170-017-0839-3 ↗
14. T.M. Pollock and S. Tin: J. Propul. Power, 2006, vol. 22(2), pp. 361–74.10.2514/1.18239 ↗
15. W.E. Frazier: J. Mater. Eng. Perform., 2014, vol. 23(6), pp. 1917–28.10.1007/s11665-014-0958-z ↗
16. X. Wang, X. Gong, and K. Chou: Proc. Inst. Mech. Eng. B, 2016, vol. 231(11), pp. 1890–1903.10.1177/0954405415619883 ↗
17. D. Herzog, V. Seyda, E. Wycisk, and C. Emmelmann: Acta Mater., 2016, vol. 117, pp. 371–92.10.1016/j.actamat.2016.07.019 ↗
18. L.E. Murr, S.M. Gaytan, D.A. Ramirez, E. Martinez, J. Hernandez, K.N. Amato, P.W. Shindo, F.R. Medina, and R.B. Wicker: J. Mater. Sci. Technol., 2012, vol. 28(1), pp. 1–4.10.1016/S1005-0302(12)60016-4 ↗
19. N. Sanaei, A. Fatemi, and N. Phan: Mater. Des., 2019, vol. 182, p. 108091.10.1016/j.matdes.2019.108091 ↗
20. A. Du Plessis, I. Yadroitsava, and I. Yadroitsev: Mater. Des., 2020, vol. 187, p. 108385.10.1016/j.matdes.2019.108385 ↗
21. Kim, F. H., & Moylan, S. P.: NIST Advanced Manufacturing Series, 2018, vol. 100–16.
22. S. Tomida, K. Nakata, S. Shibata, I. Zenkouji, and S. Saji: Surf. Coat. Technol., 2003, vol. 169–170, pp. 468–71.10.1016/S0257-8972(03)00100-2 ↗
23. F. Zhihao, L. Libin, C. Longfei, and G. Yingchun: Procedia CIRP, 2018, vol. 71, pp. 150–54.10.1016/j.procir.2018.05.088 ↗
24. Z. Zhang, P. Lin, and L. Ren: Opt. Lasers Eng., 2014, vol. 55, pp. 237–42.10.1016/j.optlaseng.2013.11.014 ↗
25. N.N. Kumbhar and A.V. Mulay: J. Inst. Eng. C, 2016, vol. 99(4), pp. 481–87.
26. L.M. Galantucci, F. Lavecchia, and G. Percoco: CIRP Ann., 2009, vol. 58(1), pp. 189–92.10.1016/j.cirp.2009.03.071 ↗
27. Z. Sun, I. Annergren, D. Pan, and T.A. Mai: Mater. Sci. Eng. A, 2003, vol. 345(1–2), pp. 293–300.10.1016/S0921-5093(02)00477-X ↗
28. Y. Yao, X. Li, Y.Y. Wang, W. Zhao, G. Li, and R.P. Liu: J. Alloys Compd., 2014, vol. 583, pp. 43–47.10.1016/j.jallcom.2013.08.160 ↗
29. M.M. Pariona, V. Teleginski, K. dos Santos, S. Machado, A.J. Zara, N.K. Zurba, and R. Riva: Surf. Coat. Technol., 2012, vol. 206(8–9), pp. 2293–2301.10.1016/j.surfcoat.2011.10.007 ↗
30. J. Iwaszko and M. Strzelecka: Opt. Lasers Eng., 2016, vol. 81, pp. 63–69.10.1016/j.optlaseng.2016.01.009 ↗
31. Y. Li, Z. Zhang, and Y. Guan: Appl. Surf. Sci., 2020, vol. 511, p. 145423.10.1016/j.apsusc.2020.145423 ↗
32. T. Zhang, H. Yuan, and S. Yang: J. Mater. Process. Technol., 2021, vol. 293, p. 117087.10.1016/j.jmatprotec.2021.117087 ↗
33. L. Chai, S. Yuan, W. Huang, X. Yang, F. Wang, D. Wang, and J. Wang: Trans. Nonferrous Met. Soc. China, 2018, vol. 28(8), pp. 1530–37.10.1016/S1003-6326(18)64794-6 ↗
34. Oliveira, R., Kakitani, R., Cangerana, K. C., Garcia, A., & Cheung, N.: 2nd Coatings and Interfaces Web Conference (CIWC-2 2020), 2020.
35. W. Yu, S.L. Sing, C.K. Chua, and X. Tian: J. Alloys Compd., 2019, vol. 792, pp. 574–81.10.1016/j.jallcom.2019.04.017 ↗
36. M.M. Pariona, V. Teleginski, K. dos Santos, E.L. dos Santos, A.A. de Lima, and R. Riva: Mater. Charact., 2012, vol. 74, pp. 64–76.10.1016/j.matchar.2012.08.011 ↗
37. B.S. Yilbas, S.S. Akhtar, and C. Karatas: Opt. Lasers Eng., 2010, vol. 48(7–8), pp. 740–49.10.1016/j.optlaseng.2010.03.012 ↗
38. G. Liu, D. Du, K. Wang, Z. Pu, and B. Chang: J. Manuf. Process., 2021, vol. 72, pp. 126–37.10.1016/j.jmapro.2021.10.015 ↗
39. T. Kurzynowski, I. Smolina, K. Kobiela, B. Kuźnicka, and E. Chlebus: Mater. Des., 2017, vol. 132, pp. 349–59.10.1016/j.matdes.2017.07.024 ↗
40. Newell, David J.: Theses and Dissertations, 2020, 3210.
41. R. Li, Y. Jin, Z. Li, Y. Zhu, and M. Wu: Surf. Coat. Technol., 2014, vol. 259, pp. 725–31.10.1016/j.surfcoat.2014.09.067 ↗
42. H. Tian, X. Chen, Z. Yan, X. Zhi, Q. Yang, and Z. Yuan: Appl. Phys. A, 2019, https://doi.org/10.1007/s00339-019-2772-9.10.1007/s00339-019-2772-9 ↗
43. J.K. Chaurasia, A.N. Jinoop, P. Parthasarathy, C.P. Paul, K.S. Bindra, and S. Bontha: Optik, 2021, vol. 246, p. 167766.10.1016/j.ijleo.2021.167766 ↗
44. A. Kidess, S. Kenjereš, B.W. Righolt, and C.R. Kleijn: Int. J. Therm. Sci., 2016, vol. 104, pp. 412–22.10.1016/j.ijthermalsci.2016.01.015 ↗
45. Z. Xiang, R. Yan, X. Wu, L. Du, and Q. Yin: Optik, 2020, vol. 206, p. 164316.10.1016/j.ijleo.2020.164316 ↗
46. A.R. Valizadeh, A.R. Kiani-Rashid, M.H. Avazkonandeh-Gharavol, and E.Z. Karimi: Metallogr. Microstruct. Anal., 2013, vol. 2(2), pp. 107–12.10.1007/s13632-013-0064-x ↗
47. W. Kurz and D.J. Fisher: Acta Metall., 1981, vol. 29(1), pp. 11–20.10.1016/0001-6160(81)90082-1 ↗
48. L. Thijs, K. Kempen, J.-P. Kruth, and J. Van Humbeeck: Acta Mater., 2013, vol. 61(5), pp. 1809–19.10.1016/j.actamat.2012.11.052 ↗
49. M.V. Canté, C. Brito, J.E. Spinelli, and A. Garcia: Mater. Des., 2013, vol. 51, pp. 342–46.10.1016/j.matdes.2013.04.023 ↗
50. Y. Zhang, Z. Li, P. Nie, and Y. Wu: Metall. Mater. Trans. A, 2013, vol. 44A(12), pp. 5513–21.10.1007/s11661-013-1903-8 ↗
51. J. Yang, J. Han, H. Yu, J. Yin, M. Gao, Z. Wang, and X. Zeng: Mater. Des., 2016, vol. 110, pp. 558–70.10.1016/j.matdes.2016.08.036 ↗
52. A. Astarita, S. Genna, C. Leone, F.M. Minutolo, F. Rubino, and A. Squillace: Procedia CIRP, 2015, vol. 33, pp. 452–57.10.1016/j.procir.2015.06.101 ↗
53. T.A. Costa, M. Dias, L.G. Gomes, O.L. Rocha, and A. Garcia: J. Alloys Compd., 2016, vol. 683, pp. 485–94.10.1016/j.jallcom.2016.05.099 ↗
54. C. Li, Z.Y. Liu, X.Y. Fang, and Y.B. Guo: Procedia CIRP, 2018, vol. 71, pp. 348–53.10.1016/j.procir.2018.05.039 ↗
55. E. Mirkoohi, J.R. Dobbs, and S.Y. Liang: Int. J. Adv. Manuf. Technol., 2020, vol. 106(9–10), pp. 4105–21.10.1007/s00170-019-04919-0 ↗