Mechanistic Origin of Orientation-Dependent Substructure Evolution in Aluminum and Aluminum-Magnesium Alloys
Source abstract
Abstract
Role of magnesium (Mg) solute and deformation temperature on the orientation-dependent substructure evolution in aluminum (Al) was investigated experimentally. The mechanistic origin of the experimental orientation dependence was then explored with numerical modelling. In experiments, the Al–Mg showed more geometrically necessary dislocation density and residual strain but had insignificant differences between hard and soft crystallographic orientations. Increased Mg-content led to the conversion of dislocation cell structures to dislocation tangles. On the other hand, an increase in deformation temperature appeared to nullify the role of solute, and irrespective of Mg content, the substructures were not orientation dependent. Molecular dynamics (MD) simulations provided temperature and solute dependence of dislocation drag coefficient and probability of cross slip. These appeared to be orientations independent. Discrete dislocation dynamics (DDD) simulations were then conducted by incorporating relevant parameters from MD and fitting DDD simulated stress-strain behavior with experimental data. Further, the solute was modelled as static obstacles to dislocation movement, hindering easy glide and short-range dislocation–dislocation interactions. Dislocation interactions at the slip plane intersections generated dynamic obstacles and sources—their ratio being determined by the probability of cross-slip. The DDD simulations indicated that evolving density of dynamic obstacles and sources determined the orientation dependence of substructure evolution.
Source: expertdata · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (95)
Show source-provided references
1. F.J. Humphreys and M. Hatherly: Recrystallization and related annealing phenomena, 2nd ed., Pergamon Materials Series, Elsevier, Oxford, 2004.10.1016/B978-008044164-1/50012-8 ↗
2. B. Verlinden, J. Driver, I. Samajdar, and R.D. Doherty: Thermo-mechanical Processing of Metallic Materials, Elsevier, Oxford, 2007.
3. J.E. Dorn and P. Pietrokowsky: J. Met., 1950, vol. 2, pp. 933–43.
4. B.A. Bilby: Proc. Phys. Soc. Sect. A., 1950, vol. 63, pp. 191–200.10.1088/0370-1298/63/3/302 ↗
5. O.D. Sherby, R.A. Anderson, and J.E. Dorn: J. Met., 1951, vol. 3, pp. 643–52.
6. G.W.J. Waldron: Acta Metall., 1965, vol. 13, pp. 897–906.10.1016/0001-6160(65)90081-7 ↗
7. J.G. Morris: Mater. Sci. Eng., 1974, vol. 13, pp. 101–08.10.1016/0025-5416(74)90177-3 ↗
8. D.J. Lloyd: Metall. Trans. A., 1980, vol. 11A, pp. 1287–94.10.1007/BF02653482 ↗
9. J.H. Driver and J.M. Papazian: Mater. Sci. Eng., 1985, vol. 76, pp. 51–56.10.1016/0025-5416(85)90079-5 ↗
10. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol. 40, pp. 205–19.10.1016/0956-7151(92)90296-Q ↗
11. D.A. Hughes: Acta Metall. Mater., 1993, vol. 41, pp. 1421–30.10.1016/0956-7151(93)90251-M ↗
12. J. Gubicza, N.Q. Chinh, Z. Horita, and T.G. Langdon: Mater. Sci. Eng. A., 2004, vol. 387–389, pp. 55–59.10.1016/j.msea.2004.03.076 ↗
13. X. Sauvage, N. Enikeev, R. Valiev, Y. Nasedkina, and M. Murashkin: Acta Mater., 2014, vol. 72, pp. 125–36.10.1016/j.actamat.2014.03.033 ↗
14. M. Zha, X.T. Meng, H.M. Zhang, X.H. Zhang, H.L. Jia, Y.J. Li, J.Y. Zhang, H.Y. Wang, and Q.C. Jiang: J. Alloys Compd., 2017, vol. 728, pp. 872–77.10.1016/j.jallcom.2017.09.017 ↗
15. J.H. Driver, D. Juul Jensen, and N. Hansen: Acta Metall. Mater., 1994, vol. 42, pp. 3105–114.10.1016/0956-7151(94)90408-1 ↗
16. X. Huang and N. Hansen: Scr. Mater., 1997, vol. 37, pp. 1–7.10.1016/S1359-6462(97)00072-9 ↗
17. N. Hansen and X. Huang: Acta Mater., 1998, vol. 46, pp. 1827–36.10.1016/S1359-6454(97)00365-0 ↗
18. Q. Liu, D. Juul Jensen, and N. Hansen: Acta Mater., 1998, vol. 46, pp. 5819–38.10.1016/S1359-6454(98)00229-8 ↗
19. S. Sun, B.L. Adams, and W.E. King: Philos. Mag. A Phys. Condens. Matter Struct. Defects Mech. Prop., 2000, vol. 80, pp. 9–25.
20. L. Delannay, O.V. Mishin, D.J. Jensen, and P. Van Houtte: Acta Mater., 2001, vol. 49, pp. 2441–51.10.1016/S1359-6454(01)00150-1 ↗
21. I. Samajdar, P. Ratchev, B. Verlinden, and E. Aernoudt: Acta Mater., 2001, vol. 49, pp. 1759–69.10.1016/S1359-6454(01)00083-0 ↗
22. N. Hansen, X. Huang, W. Pantleon, and G. Winther: Philos. Mag., 2006, vol. 86, pp. 3981–94.10.1080/14786430600654446 ↗
23. C.C. Merriman, D.P. Field, and P. Trivedi: Mater. Sci. Eng. A., 2008, vol. 494, pp. 28–35.10.1016/j.msea.2007.10.090 ↗
24. S. Zhang, W. Liu, J. Wan, R.D.K. Misra, Q. Wang, and C. Wang: Mater. Sci. Eng. A., 2020, vol. 775, p. 138939.10.1016/j.msea.2020.138939 ↗
25. R.D. Doherty, L.C. Chen, and I. Samajdar: Mater. Sci. Eng. A., 1998, vol. 257, pp. 18–36.10.1016/S0921-5093(98)00821-1 ↗
26. I. Samajdar, B. Verlinden, L. Rabet, and P. Van Houtte: Mater. Sci. Eng. A., 1999, vol. 266, pp. 146–54.10.1016/S0921-5093(99)00022-2 ↗
27. J.S. Kallend and Y.C. Huang: Met. Sci. J., 1984, vol. 18, pp. 381–86.10.1179/030634584790419890 ↗
28. I.L. Dillamore, P.L. Morris, C.J.E. Smith, and W.B. Hutchinson: Proc. R. Soc. Lond. A. Math. Phys. Sci., 1972, vol. 329, pp. 405–20.10.1098/rspa.1972.0120 ↗
29. R. Becker, J.F. Butler, H. Hu, and L.A. Lalli: Metall. Trans. A., 1991, vol. 22A, pp. 45–58.10.1007/BF03350948 ↗
30. R. Khatirkar, K.V. Mani Krishna, L.A.I. Kestens, R.H. Petrov, P. Pant, and I. Samajdar: Mater. Sci. Forum., 2011, vol. 702–703, pp. 782–85.10.4028/www.scientific.net/MSF.702-703.782 ↗
31. J. Jiang, T. Ben Britton, and A.J. Wilkinson: Int. J. Plasticity., 2015, vol. 69, pp. 102–17.10.1016/j.ijplas.2015.02.005 ↗
32. Q. Sun, Y. Ni, and S. Wang: Acta Mater., 2021, vol. 203, p. 116474.10.1016/j.actamat.2020.11.016 ↗
33. A.H. Cottrell and M.A. Jaswon: Proc. R. Soc. Lond., 1949, vol. 199, pp. 109–14.
34. N.F. Mott and F.R.N. Nabarro: Bristol Physics Society Conference, 1948.
35. S. Plimpton: J. Comput. Phys., 1995, vol. 117, pp. 1–19.10.1006/jcph.1995.1039 ↗
36. M.I. Mendelev, M. Asta, M.J. Rahman, and J.J. Hoyt: Philos. Mag., 2009, vol. 89, pp. 3269–85.10.1080/14786430903260727 ↗
37. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 5317–31.10.1007/s11661-017-4280-x ↗
38. A. Prakash, T.N. Tak, A. Lodh, N. Nayan, S.V.S. Narayana Murty, P.J. Guruprasad, and I. Samajdar: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 1250–60.10.1007/s11661-018-5076-3 ↗
39. A. Lodh, T.N. Tak, A. Prakash, P.J. Guruprasad, S.M. Keralavarma, A.A. Benzerga, C. Hutchinson, and I. Samajdar: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 5038–55.10.1007/s11661-019-05421-8 ↗
40. K.C. Nayak and P.P. Date: Mater. Charact., 2021, vol. 173, p. 110954.10.1016/j.matchar.2021.110954 ↗
41. P. van Houtte: Mater. Sci. Forum., 1993, vol. 133–136, pp. 97–110.10.4028/www.scientific.net/MSF.133-136.97 ↗
42. W. Reimers and R. Dupke: Textures Microstruct., 1995, vol. 23, pp. 173–83.10.1155/TSM.23.173 ↗
43. P. Vanhoutte and L.D. Buyser: Acta. Metall., 1999, vol. 41, pp. 323–36.10.1016/0956-7151(93)90063-X ↗
44. P.J. Withers and H.K.D.H. Bhadeshia: Mater. Sci. Technol., 2001, vol. 17, pp. 355–65.10.1179/026708301101509980 ↗
45. K.V. Mani Krishna, R. Raghavan, D. Srivastava, G.K. Dey, S.K. Sahoo, and I. Samjadar: Trans. Indian Inst. Met., 2011, vol. 64, pp. 309–13.10.1007/s12666-011-0063-z ↗
46. A. Borbély and I. Groma: Appl. Phys. Lett., 2001, vol. 79, pp. 1772–74.10.1063/1.1404134 ↗
47. T.J. Ruggles and D.T. Fullwood: Ultramicroscopy., 2013, vol. 133, pp. 8–15.10.1016/j.ultramic.2013.04.011 ↗
48. G.C. Sneddon, P.W. Trimby, and J.M. Cairney: Mater. Sci. Eng. Reports., 2016, vol. 110, pp. 1–12.10.1016/j.mser.2016.10.001 ↗
49. D.B. Williams and C.B. Carter: Transmission Electron Microscopy: A Textbook for Materials Science. Diffraction II, vol. 2, Springer, 1996.10.1007/978-1-4757-2519-3_19 ↗
50. M.J. Mills, M.S. Daw, S.M. Foiles, and D.B. Miracle: MRS Online Proceed. Lib., 1992, vol. 288, pp. 257–62.10.1557/PROC-288-257 ↗
51. E. Oren, E. Yahel, and G. Makov: Comput. Mater. Sci., 2017, vol. 138, pp. 246–54.10.1016/j.commatsci.2017.06.039 ↗
52. P. Hirel: Comput. Phys. Commun., 2015, vol. 197, pp. 212–19.10.1016/j.cpc.2015.07.012 ↗
53. M.W. Finnis and J.E. Sinclair: Philos. Mag., 1984, vol. 50, pp. 45–55.10.1080/01418618408244210 ↗
54. A. Stukowski: Model. Simul. Mater. Sci. Eng., 2010, vol. 18, pp. 015012–19.10.1088/0965-0393/18/1/015012 ↗
55. A. Stukowski, V.V. Bulatov, and A. Arsenlis: Model. Simul. Mater. Sci. Eng., 2012, vol. 20, pp. 085007–23.10.1088/0965-0393/20/8/085007 ↗
56. E. Van der Giessen and A. Needleman: Model. Simul. Mater. Sci. Eng., 1995, vol. 3, pp. 689–735.10.1088/0965-0393/3/5/008 ↗
57. A.A. Benzerga, Y. Bréchet, A. Needleman, and E. Van der Giessen: Model. Simul. Mater. Sci. Eng., 2004, vol. 12, pp. 159–96.10.1088/0965-0393/12/1/014 ↗
58. H. Fan, Z. Li, M. Huang, and X. Zhang: Int. J. Solids Struct., 2011, vol. 48, pp. 1754–66.10.1016/j.ijsolstr.2011.02.026 ↗
59. S.S. Shishvan and E. Van der Giessen: J. Mech. Phys. Solids., 2010, vol. 58, pp. 678–95.10.1016/j.jmps.2010.02.011 ↗
60. A. Prakash, T.N. Tak, N.N. Pai, S.V.S.N. Murty, P.J. Guruprasad, R.D. Doherty, and I. Samajdar: Model. Simul. Mater. Sci., 2021, vol. 29, p. 085016.10.1088/1361-651X/ac3369 ↗
61. X.G. Qiao, N. Gao, and M.J. Starink: Philos. Mag., 2012, vol. 92, pp. 446–70.10.1080/14786435.2011.616865 ↗
62. R. Mondal, S.K. Bonagani, A. Lodh, T. Sharma, P.V. Sivaprasad, G. Chai, V. Kain, and I. Samajdar: Corrosion., 2019, vol. 75, pp. 1315–26.10.5006/3091 ↗
63. M.I. Khan, A. Prakash, H.K. Mehtani, P. Raut, N.N. Pai, A. Sarkar, M.J.N.V. Prasad, S. Parida, and I. Samajdar: Metall. Mater. Trans. A., 2021, vol. 52A, pp. 4597–4608.10.1007/s11661-021-06412-4 ↗
64. K. Thool, A. Patra, D. Fullwood, K.V.M. Krishna, D. Srivastava, and I. Samajdar: Int. J. Plasticity., 2020, vol. 133, p. 102785.10.1016/j.ijplas.2020.102785 ↗
65. B. Gurrutxaga-Lerma, D.S. Balint, D. Dini, D.E. Eakins, and A.P. Sutton: Dynamic Discrete Dislocation Plasticity, vol. 47, Elsevier, Amsterdam, 2014.10.1016/B978-0-12-800130-1.00002-3 ↗
66. S. Zhao, Y.N. Osetsky, and Y. Zhang: J. Alloys Compd., 2017, vol. 701, pp. 1003–08.10.1016/j.jallcom.2017.01.165 ↗
67. W.G. Nöhring and W.A. Curtin: Acta Mater., 2017, vol. 128, pp. 135–48.10.1016/j.actamat.2017.02.027 ↗
68. Y. Qi and R.K. Mishra: Phys. Rev. B Condens. Matter Mater. Phys., 2007, vol. 75, pp. 1–5.10.1103/PhysRevB.75.224105 ↗
69. T.C. Schulthess, P.E.A. Turchi, and A. Gonis: Acta Mater., 1998, vol. 46, pp. 2215–21.10.1016/S1359-6454(97)00432-1 ↗
70. T. Morishige, T. Hirata, T. Uesugi, Y. Takigawa, M. Tsujikawa, and K. Higashi: Scr. Mater., 2011, vol. 64, pp. 355–58.10.1016/j.scriptamat.2010.10.033 ↗
71. D. Zhao, O.M. Løvvik, K. Marthinsen, and Y. Li: J. Mater. Sci., 2016, vol. 51, pp. 6552–68.10.1007/s10853-016-9834-6 ↗
72. V.C. Kannan and G. Thomas: Int. J. Appl. Phys., 1966, vol. 37, pp. 2363–70.10.1063/1.1708819 ↗
73. H. Hu: in Recovery and Recrystallization of Metals, L. Himmel (ed.), Wiley, New York, 1963, pp. 311–78.
74. D.D. Sam and B.L. Adams: Metall. Mater. Trans. A., 1986, vol. 17A, pp. 513–17.10.1007/BF02643958 ↗
75. G. Guiglionda, A. Borbély, and J.H. Driver: Acta Mater., 2004, vol. 52, pp. 3413–23.10.1016/j.actamat.2004.03.037 ↗
76. S.K. Shekhawat, R. Chakrabarty, V. Basavaraj, V.D. Hiwarkar, K.V. Mani, P.J. Guruprasad, A.A. Benzerga, K.G. Suresh, and I. Samajdar: Acta Mater., 2015, vol. 84, pp. 256–64.10.1016/j.actamat.2014.10.042 ↗
77. N. Keskar, S. Mukherjee, K.V. Mani Krishna, D. Srivastava, G.K. Dey, P. Pant, R.D. Doherty, and I. Samajdar: Acta Mater., 2014, vol. 69, pp. 265–74.10.1016/j.actamat.2014.01.023 ↗
78. A. Dutta, D. Ponge, S. Sandlöbes, and D. Raabe: Materialia., 2019, vol. 5, p. 100252.10.1016/j.mtla.2019.100252 ↗
79. I.L. Dillamore, J.G. Roberts, and A.C. Bush: Met. Sci., 1979, vol. 13, pp. 73–77.10.1179/msc.1979.13.2.73 ↗
80. B.J. Duggan, M. Hatherly, W.B. Hutchinson, and P.T. Wakefield: Met. Sci., 1978, vol. 12, pp. 343–51.10.1179/030634578790433909 ↗
81. M.Z. Quadir and B.J. Duggan: Acta Mater., 2004, vol. 52, pp. 4011–21.10.1016/j.actamat.2004.05.017 ↗
82. M.P. Bondar, S.G. Psakhie, A.I. Dmitriev, and A.Y. Nikonov: Phys. Mesomech., 2013, vol. 16, pp. 191–99.10.1134/S1029959913030028 ↗
83. A.A. Ridha and W.B. Hutchinson: Acta Metall., 1982, vol. 30, pp. 1929–39.10.1016/0001-6160(82)90033-5 ↗
84. R. Becker and S. Panchanadeeshwaran: Acta Metall. Mater., 1995, vol. 43, pp. 2701–19.10.1016/0956-7151(94)00460-Y ↗
85. S. Panchanadeeswaran, R.D. Doherty, and R. Becker: Acta Mater., 1996, vol. 44, pp. 1233–62.10.1016/1359-6454(95)00186-7 ↗
86. H. Pirgazi and L.A. Kestens: Mater. Charact., 2021, vol. 171, p. 110752.10.1016/j.matchar.2020.110752 ↗
87. S.R. Kalidindi, A. Bhattacharyya, and R.D. Doherty: Proc. R. Soc. A Math. Phys. Eng. Sci., 2004, vol. 460, pp. 1935–56.10.1098/rspa.2003.1260 ↗
88. P. Van Houtte: Textures Microstruct., 1988, vol. 8, pp. 313–50.10.1155/TSM.8-9.313 ↗
89. P.J. Guruprasad and A.A. Benzerga: J. Mech. Phys. Solids., 2008, vol. 56, pp. 132–56.10.1016/j.jmps.2007.03.009 ↗
90. P.J. Guruprasad and A.A. Benzerga: IOP Conf. Ser. Mater. Sci. Eng., 2008, vol. 2009, p. 01.
91. W. Pantleon: Scr. Mater., 2008, vol. 58(11), pp. 994–97.10.1016/j.scriptamat.2008.01.050 ↗
92. N. Allain-Bonasso, F. Wagner, S. Berbenni, and D.P. Field: Mater. Sci. Eng. A., 2010, vol. 548, pp. 56–63.10.1016/j.msea.2012.03.068 ↗
93. M. Calcagnotto, D. Ponge, E. Demir, and D. Raabe: Mater. Sci. Eng. A., 2010, vol. 527, pp. 2738–46.10.1016/j.msea.2010.01.004 ↗
94. A. Kundu and D.P. Field: Mater. Sci. Eng. A., 2016, vol. 667, pp. 435–43.10.1016/j.msea.2016.05.022 ↗
95. S. Sun, B.L. Adams, and W.E. King: Philos. Mag. A., 2000, vol. 80, pp. 9–25.10.1080/01418610008212038 ↗