journal article·2022-06Open access

Microstructure and Mechanical Properties of a High-Strength Ti-4Al-2Fe-3Cu Alloy Fabricated by Sintering and Hot Extrusion

Mojtaba Najafizadeh, Deliang Zhang, Alireza Maldar, Mansoor Bozorg, Jiamiao Liang

Abstract

A Ti-4Al-2Fe-3Cu (wt pct) alloy containing only low-cost alloying elements was fabricated by vacuum sintering a blend of TiH2, Al, Fe, and Cu powders at 1200 °C for 1 hour followed by hot extrusion at the same temperature. The as-extruded alloy exhibited a microstructure consisting of mainly α/β lamellar colonies and Ti2Cu as a minor phase. The average colony size and lamella thickness were 118 and 12 µm, respectively, and Fe and Cu were predominantly distributed in the β lamellae. The as-extruded alloy had a high tensile yield strength (YS) and ultimate tensile strength (UTS) of 1248 and 1270 MPa, respectively, but a limited ductility (elongation to fracture: 2.3 pct). Annealing at 750 °C for 4 hour caused the average colony size and lamella thickness of the alloy to increase to 145 and 17 µm, respectively, and the volume fraction of the β phase decreased with the annealing. These microstructural changes resulted in a slight decrease of the YS and UTS to 1221 and 1253 MPa, but a clear increase of the ductility with the elongation to fracture reaching 4 pct. This work demonstrates that a combination of relatively low-temperature vacuum sintering, hot extrusion, and annealing can be effectively utilized to fabricate a low-cost Ti-4Al-2Fe-3Cu alloy with high strength and appreciable tensile ductility.
Source: expertdata · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Intermetallics and Advanced Alloy Properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (48)

Show source-provided references
1. A.S. Jabur, J.T. Al-Haidary, and E.S. Al-Hasani: J. Alloys Compd., 2013, vol. 578, pp. 136–42.10.1016/j.jallcom.2013.05.029 ↗
2. A.A. Ilyin, B.A. Kolachev, and I.S. Polkin: Titanium Alloys: Composition, Structure, Properties – Reference Book, VILS-MATI, Moscow, 2009.
3. A. Carman, L.C. Zhang, O.M. Ivasishin, D.G. Savvakin, M.V. Matviychuk, and E.V. Pereloma: Mater. Sci. Eng. A., 2011, vol. 528, pp. 1686–93.10.1016/j.msea.2010.11.004 ↗
4. W. Chen, Y. Yamamoto, W.H. Peter, M.B. Clark, S.D. Nunn, J.O. Kiggans, T.R. Muth, C.A. Blue, J.C. Williams, and K. Akhtar: J. Alloys Compd., 2012, vol. 541, pp. 440–47.10.1016/j.jallcom.2012.06.131 ↗
5. V. Brailovski, S. Prokoshkin, M. Gauthier, K. Inaekyan, and S. Dubinskiy: J. Alloys Compd., 2013, vol. 577, pp. s413–17.10.1016/j.jallcom.2011.12.157 ↗
6. M. Ikeda, S. Komatsu, K. Inoue, H. Shiota, and T. Imose: Mater. Sci. Technol., 2000, vol. 16, pp. 605–08.10.1179/026708300101508342 ↗
7. M. Ikeda, S. Komatsu, M. Ueda, T. Imose, and K. Inoue: in Proceeding of the Fourth Pacific Rim International Conference on Advanced Materials and Processing (PRICM4), ed. by S. Hanada, Z. Zhong, S. W. Nam, R.N. Wright. Sendai: Japan Institute of Metals, 2001, pp. 213–16.
8. M. Jia, D. Zhang, J. Liang, and B. Gabbitas: Metall. Mater. Trans. A., 2017, vol. 48A, pp. 2015–29.10.1007/s11661-017-3965-5 ↗
9. H.Y. Lu, D.L. Zhang, B. Gabbitas, F. Yang, and S. Matthews: J. Alloys Compd., 2014, vol. 606, pp. 262–68.10.1016/j.jallcom.2014.03.144 ↗
10. C. Liang, M.X. Ma, M.T. Jia, S. Raynova, J.Q. Yan, and D.L. Zhang: Mater. Sci. Eng. A., 2014, vol. 619, pp. 290–99.10.1016/j.msea.2014.09.083 ↗
11. S. Raynova, F. Yang, and L. Bolzoni: Mater. Sci. Eng. A., 2021, vol. 799, p. 140157.10.1016/j.msea.2020.140157 ↗
12. M. Najafizadeh, A. Bahadoran, M. Bozorg, B. Sadeghi, J. Liang, and D. Zhang: J. Alloys Compd., 2021, vol. 884, p. 161136.10.1016/j.jallcom.2021.161136 ↗
13. M. Najafizadeh, M. Bozorg, A. Bahadoran, J. Liang, and D. Zhang: J. Alloys Compd., 2021, vol. 884, p. 161079.10.1016/j.jallcom.2021.161079 ↗
14. VYu. Zadorozhnyy, I.V. Shchetinin, M.V. Zheleznyi, N.V. Chirikov, T. Wada, H. Kato, and D.V. Louzguine-Luzgin: Mater. Sci. Eng. A., 2015, vol. 632, pp. 88–95.10.1016/j.msea.2015.02.065 ↗
15. VYu. Zadorozhnyy, X. Shi, D.S. Kozak, T. Wada, J.Q. Wang, H. Kato, and D.V. Louzguine-Luzgin: J. Alloys Compd., 2017, vol. 707, pp. 291–97.10.1016/j.jallcom.2016.11.213 ↗
16. S. Mazdiyasni, D.B. Miracle, D.M. Dimiduk, M.G. Mendiratta, and P.R. Subramanian: Scr. Metall., 1989, vol. 23, pp. 327–31.10.1016/0036-9748(89)90376-1 ↗
17. J. Liu, F. Li, C. Liu, H. Wang, B. Ren, K. Yang, and E. Zhang: Mat. Sci. Eng. C., 2014, vol. 35, pp. 392–400.10.1016/j.msec.2013.11.028 ↗
18. M. Hagiwara and S. Emura: Mater. Sci. Eng. A., 2003, vol. 352, pp. 85–92.10.1016/S0921-5093(02)00897-3 ↗
19. B.Y. Chen, K.S. Hwang, and K.L. Ng: Mater. Sci. Eng. A., 2011, vol. 528, pp. 4556–63.10.1016/j.msea.2011.02.092 ↗
20. A. Bahador, J. Umeda, R. Yamanoglu, T.A. Abu Bakar, and K. Kondoh: Mater. Sci. Eng. A., 2021, vol. 800, pp. 140–324.10.1016/j.msea.2020.140324 ↗
21. M. Dewidar: Mater. Des., 2010, vol. 31, pp. 3964–70.10.1016/j.matdes.2010.03.042 ↗
22. F. Yang, D.L. Zhang, B. Gabbitas, and H.Y. Lu: Key Eng. Mater., 2013, vol. 551, pp. 67–72.10.4028/www.scientific.net/KEM.551.67 ↗
23. F. Yang, D.L. Zhang, B. Gabbitas, and H.Y. Lu: Key Eng. Mater., 2012, vol. 520, pp. 70–75.10.4028/www.scientific.net/KEM.520.70 ↗
24. M.T. Jia, D.L. Zhang, and B. Gabbitas: Key Eng. Mater., 2012, vol. 520, pp. 82–88.10.4028/www.scientific.net/KEM.520.82 ↗
25. H. Y. Lu, D. L. Zhang, F. Yang: in: Conference Proceedings: Powder Processing, Consolidation and Metallurgy of Titanium, 5–7 December 2011, Brisbane
26. C. Tan, Q. Sun, L. Xiao, Y. Zhao, and J. Sun: J. Alloys Compd., 2017, vol. 724, pp. 112–20.10.1016/j.jallcom.2017.07.002 ↗
27. E. Zhang, J. Ren, S. Li, L. Yang, and G. Qin: Biomed. Mater., 2016, vol. 11, pp. 065001.10.1088/1748-6041/11/6/065001 ↗
28. R.P. Siqueira, H.R.Z. Sandim, A.O.F. Hayama, and V.A.R. Henriques: J. Alloys Compd., 2009, vol. 476, pp. 130–37.10.1016/j.jallcom.2008.09.004 ↗
29. J.L. Murray, Binary Alloy Phase Diagrams, ASM, 1990.
30. Y. Feng, W. Zhang, G. Cui, J. Wu, and W. Chen: J. Alloy. Compd., 2017, vol. 721, pp. 383–91.10.1016/j.jallcom.2017.05.309 ↗
31. T. Aoki, I.C.I. Okafor, I. Watanabe, M. Hattori, Y. Oda, and T. Okabe: J. Oral Rehabil., 2004, vol. 31, pp. 1109–14.10.1111/j.1365-2842.2004.01347.x ↗
32. X. Yao, Q.Y. Sun, L. Xiao, and J. Sun: J. Alloy. Compd., 2009, vol. 484, pp. 196–202.10.1016/j.jallcom.2009.04.095 ↗
33. G. Lütjering, and J.C. Williams, Titanium, second ed. Springer, 2007.
34. M. Yan, W. Xu, M.S. Dargusch, H.P. Tang, M. Brandt, and M. Qian: Powder Metall., 2014, vol. 57(4), pp. 251–57.10.1179/1743290114Y.0000000108 ↗
35. O.M. Ivasishin and D.G. Savvakin: Key Eng. Mater., 2010, vol. 436, pp. 113–21.10.4028/www.scientific.net/KEM.436.113 ↗
36. A. Churakova and D. Gunderov: Mater. Today: Proc., 2017, vol. 4, pp. 4732–36.
37. Y. Zhang, Y.S. Sato, H. Kokawa, S.H.C. Park, and S. Hirano: Mater. Sci. Eng. A., 2008, vol. 485, pp. 448–55.10.1016/j.msea.2007.08.051 ↗
38. L. Li and M. Li: Sci. China Tech. Sci., 2018, vol. 61, pp. 1688–95.10.1007/s11431-018-9336-9 ↗
39. D. Banerjeea and J.C. Williams: Acta Mater., 2013, vol. 61, pp. 844–79.10.1016/j.actamat.2012.10.043 ↗
40. Z.Z. Fang, J.D. Paramore, P. Sun, K.S.R. Chandran, Y. Zhang, Y. Xia, F. Cao, M. Koopman, and M. Free: Int. Mater. Rev., 2017, pp. 1–53.
41. E.O. Hall: Proc. Phys. Soc. B., 1951, vol. 64, pp. 747–53.10.1088/0370-1301/64/9/303 ↗
42. Y. Luo, Y. Xie, W. Zeng, J. Liang, and D. Zhang: Metall. Mater. Trans. A., 2019, vol. 50A, pp. 1643–54.10.1007/s11661-019-05116-0 ↗
43. K.-H. Chia, K. Jung, and H. Conrad: Mater. Sci. Eng. A., 2005, vol. 409, pp. 32–38.10.1016/j.msea.2005.03.117 ↗
44. S. Crandall, N. Dahl, and T. Lardner: An Introduction to the Mechanics of Solids, McGraw-Hill, Boston, 1959.
45. P.M. Sargent and M.F. Ashby: Scripta Metall., 1982, vol. 16, pp. 1415–22.10.1016/0036-9748(82)90439-2 ↗
46. G.K. Williamson and W.H. Hall: Acta Metall., 1953, vol. 1, pp. 22–31.10.1016/0001-6160(53)90006-6 ↗
47. R. Xu, Z. Tan, D. Xiong, G. Fan, Q. Guo, J. Zhang, Y. Su, Z. Li, and D. Zhang: Compos. Part A Appl. Sci. Manuf., 2017, vol. 96, pp. 57–66.10.1016/j.compositesa.2017.02.017 ↗
48. T. Narutani and J. Takamura: Acta Metall. Mater., 1991, vol. 39, pp. 2037–49.10.1016/0956-7151(91)90173-X ↗