Formation of Coarse Recrystallized Grains in 6016 Aluminum Alloy During Holding After Hot Deformation
Source abstract
Abstract
Controlling the grain size of recrystallized grains during hot rolling is crucial in 6xxx aluminum alloys used in automotive applications to avoid the development of roughness on the surface of the formed sheet. The possible factors responsible for the development of coarse recrystallized grains are investigated in this paper. With this aim, hot compression tests followed by post-deformation holding in the testing furnace as well as by sequential annealing in the SEM chamber are performed and the evolution of the microstructure is characterized using EBSD. Grain overgrowth takes place in both types of experiments. The investigation shows that stored energy is the key factor behind the overgrowth of some recrystallized grains at the expense of others and that Smith–Zener pinning is unable to prevent this phenomenon because of the high driving pressure associated with stored energy. The anisotropic characteristics and behavior of coarse recrystallized grain boundaries are also studied. It comes out that the misorientation angle and axis are not sufficient to determine grain boundary migration rate.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metallurgy and Material Forming · Microstructure and mechanical properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (64)
Show source-provided references
1. O. Engler and J. Hirsch, Mater. Sci. Eng. A, 2002, vol. 336, pp. 249–62.10.1016/S0921-5093(01)01968-2 ↗
2. O. Engler, C. Schäfer, and H. Brinkman, Acta Mater., 2012, vol. 60, pp. 5217–32.10.1016/j.actamat.2012.06.039 ↗
3. J. Hirsch, Trans. Nonferrous Metals Soc. China, 2014, vol. 24, pp. 1995–2002.10.1016/S1003-6326(14)63305-7 ↗
4. L. Qin, M. Seefeldt, and P. Van Houtte, Acta Mater., 2015, vol. 84, pp. 215–28.10.1016/j.actamat.2014.10.054 ↗
5. K. Li, T. Zou, D. Li, Y. Peng, D. Shu, Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5734–49.10.1007/s11661-019-05453-0 ↗
6. N. Lu, J. Kang, N. Senabulya, R. Keinan, N. Gueninchault, and A. Shahani, Acta Mater., 2020, vol. 195, pp. 1–12.10.1016/j.actamat.2020.04.049 ↗
7. J. Dennis, P. Bate, and F. Humphreys, Acta Mater., 2009, vol. 57, pp. 4539–47.10.1016/j.actamat.2009.06.018 ↗
8. H.-C. Kim, C.-G. Kang, M.-Y. Huh, and O. Engler, Scripta Mater., 2007, vol. 57, pp. 325–27.10.1016/j.scriptamat.2007.04.023 ↗
9. K. Huang, Y.J. Li, and K. Marthinsen, Mater. Charact., 2015, vol. 102, pp. 92–97.10.1016/j.matchar.2015.02.015 ↗
10. K. Huang, O. Engler, Y.J. Li, and K. Marthinsen, Mater. Sci. Eng. A, 2015, vol. 628, pp. 216–29.10.1016/j.msea.2015.01.064 ↗
11. X. Fang, H. Xiao, K. Marthinsen, A. Belyakov, X. Fang, and K. Huang, Mater. Charact., 2020, vol. 166, pp. 110438.10.1016/j.matchar.2020.110438 ↗
12. V. Miller, A. Johnson, C. Torbet, and T. Pollock, Metall. Mater. Trans. A., 2016, vol. 47A, pp. 1566–74.10.1007/s11661-016-3329-6 ↗
13. M. Charpagne, J. Franchet, and N. Bozzolo, Mater. Design, 2018, vol. 144, 353–60.10.1016/j.matdes.2018.02.048 ↗
14. X. Wang, Z. Huang, B. Cai, N. Zhou, O. Magdysyuk, Y. Gao, S. Srivatsa, L. Tan, and L. Jiang, Acta Mater., 2019, vol. 168, pp. 287–98.10.1016/j.actamat.2019.02.012 ↗
15. A. Agnoli, M. Bernacki, R. Logé, J.-M. Franchet, J. Laigo, N. Bozzolo, Metall. Mater. Trans. A, 2015, vol. 46A, pp. 4405–21.10.1007/s11661-015-3035-9 ↗
16. H.-K. Park, J.-H. Kang, C.-S. Park, C.-H. Han, and N.-M. Hwang, Mater. Sci. Eng. A, 2011, vol. 528, pp. 3228–31.10.1016/j.msea.2010.12.097 ↗
17. F. Humphreys and M. Hatherly, 2nd, 2004, p. 658.
18. I. Andersen, O. Grong, and N. Ryum, Acta Metall. Mater., 1995, vol. 43, pp. 2689–2700.10.1016/0956-7151(94)00489-5 ↗
19. P. Rios, Acta Mater., 11997, vol. 45, pp. 1785–89.10.1016/S1359-6454(96)00284-4 ↗
20. B. Straumal, W. Gust, L. Dardinier, J. Hoffmann, V. Sursaeva, and L. Shvindlerman, Mater. Design, 1997, vol. 18, pp. 293–95.10.1016/S0261-3069(97)00066-6 ↗
21. A. Agnoli, M. Bernacki, R. Logé, J.-M. Franchet, J. Laigo, and N. Bozzolo, ed. by Superalloys 2012: The 12th International Symposium on Superalloys.
22. D. Olmsted, E. Holm, and S. Foiles, Acta Mater., 2009, vol. 57, pp. 3704–13.10.1016/j.actamat.2009.04.015 ↗
23. D. Olmsted, S. Foiles, and E. Holm, Acta Mater., 2009, vol. 57, pp. 3694–3703.10.1016/j.actamat.2009.04.007 ↗
24. O. Engler, Acta Mater., 1998, vol. 46, pp. 1555–68.10.1016/S1359-6454(97)00354-6 ↗
25. T.-W. Na, H.-K. Park, C.-S. Park, J.-T. Park, and N.-M. Hwang, Acta Mater., 2016, vol. 115, pp. 224–29.10.1016/j.actamat.2016.06.007 ↗
26. K.-J. Ko, P.-R. Cha, D. Srolovitz, and N.-M. Hwang, Acta Mater., 2009, vol. 57, pp. 838–45.10.1016/j.actamat.2008.10.030 ↗
27. D.-K. Lee, B.-J. Lee, K.-J. Ko, and N.-M. Hwang, Mater. Trans., 2009, vol. 50, pp. 2521–25.10.2320/matertrans.M2009209 ↗
28. Y. Huang and F. Humphreys, Mater. Chem. Phys., 2012, vol. 132, pp. 166–74.10.1016/j.matchemphys.2011.11.018 ↗
29. S. Kim and Y. Park, Acta Mater., 2008, vol. 56, pp. 3739–53.10.1016/j.actamat.2008.04.007 ↗
30. W. Van Geertruyden, H. Browne, W. Misiolek, and P. Wang, Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1049–56.
31. A. Eivani, J. Zhou, and J. Duszczyk, Philos. Magn., 2016, vol. 96, pp. 1188–96.10.1080/14786435.2016.1157637 ↗
32. Y. Mahmoodkhani, J. Chen, M.A. Wells, W.J. Poole, and N.C. Parson, Metall. Mater. Trans. A, 2019, vol. 50A, pp. 5324–35.10.1007/s11661-019-05437-0 ↗
33. H.-K. Park, H.-G. Kang, C.-S. Park, M.-Y. Huh, and N.-M. Hwang, Metall. Mater. Trans. A, 2012, vol. 43A, pp. 5218–23.10.1007/s11661-012-1334-y ↗
34. J. Chang, K. Takata, K. Ichitani, and E. Taleff, Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1942–1953.10.1007/s11661-010-0213-7 ↗
35. F. Bachmann, R. Hielscher, and H. Schaeben, Solid State Phenom., 2010, vol. 160, pp. 63–68.10.4028/www.scientific.net/SSP.160.63 ↗
36. N. Bozzolo, S. Jacomet, and R. Logé, Mater. Charact., 2012, vol. 70, pp. 28–32.10.1016/j.matchar.2012.04.020 ↗
37. C. Kerisit, R. Logé, S. Jacomet, V. Llorca, and N. Bozzolo, J. Microsc., 2013, vol. 250, pp. 189–99.10.1111/jmi.12034 ↗
38. A. Seret, C. Moussa, M. Bernacki, J. Signorelli, and N. Bozzolo, J. Appl. Crystallogr., 2019, vol. 52, pp. 548–63.10.1107/S1600576719004035 ↗
39. A. Nicolaÿ, J. Franchet, J. Cormier, H. Mansour, M. De Graef, A. Seret, and N. Bozzolo, J. Microsc., 2019, vol. 73, pp. 135–47.10.1111/jmi.12769 ↗
40. O. Engler and E. Brünger, Matériaux & Techniques, 2002, vol. 90, pp. 71–78.10.1051/mattech/200290050071 ↗
41. P. Konijnenberg, S. Zaefferer, and D. Raabe, Acta Mater., 2015, vol. 99, pp. 402–14.10.1016/j.actamat.2015.06.051 ↗
42. A. Nicolaÿ, G. Fiorucci, J. Franchet, J. Cormier, and N. Bozzolo, Acta Mater., 2019, vol. 174, pp. 406–17.10.1016/j.actamat.2019.05.061 ↗
43. A. Ridha and W. Hutchinson, Acta Metall., 1982, vol. 30, pp. 1929–39.10.1016/0001-6160(82)90033-5 ↗
44. O. Daaland and E. Nes, Acta Mater., 1996, vol. 44, pp. 1389–11.10.1016/1359-6454(95)00289-8 ↗
45. H. Vatne, R. Shahani, and E. Nes, Acta Mater., 1995, vol. 44, pp. 4447–62.10.1016/1359-6454(96)00077-8 ↗
46. I. Samajdar and R. Doherty, Acta Mater., 1998, vol. 46, pp. 3145–58.10.1016/S1359-6454(97)00492-8 ↗
47. M. Alvi, S. Cheong, J. Suni, H. Weiland, and A. Rollett, Acta Mater., 2008, vol. 56, pp. 3098–08.10.1016/j.actamat.2008.02.037 ↗
48. B. Hutchinson, Mater. Sci. Forum, 2012, vol. 702–703, pp. 3–10.
49. B. DeCost, E. Holm, Metall. Mater. Trans. A, 2017, vol. 48A, pp. 2771–80.10.1007/s11661-016-3673-6 ↗
50. E. Nes, N. Ryum, and O. Hunderi, Acta Metall., 1985, vol. 33, pp. 11–22.10.1016/0001-6160(85)90214-7 ↗
51. C. Sinclair, F. Robaut, L. Maniguet, J.-D. Mithieux, J.-H. Schmitt, and Y. Brechet, Adv. Eng. Mater., 2003, vol. 5, pp. 570–74.10.1002/adem.200300377 ↗
52. S. Tangen, K. Sjølstad, T. Furu, and E. Nes, Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2970–83.
53. N. Bozzolo, G. Sawina, F. Gerspach, K. Sztwiertnia, A. Rollett, and F. Wagner, Mater. Sci. Forum, 2007, vol. 558–559, pp. 863–68.10.4028/www.scientific.net/MSF.558-559.863 ↗
54. S. Wright, Mater. Sci. Technol., 2006, vol. 22, pp. 1287–97.10.1179/174328406X130876 ↗
55. N. Bozzolo, N. Dewobroto, T. Grosdidier, and F. Wagner, Mater. Sci. Eng. A, 2005, vol. 397, pp. 346–55.10.1016/j.msea.2005.02.049 ↗
56. Y. Zhang, A Godfrey, Q Liu, W Liu, and D Juul Jensen, Acta Mater., 2009, vol. 57, pp. 2631–39.10.1016/j.actamat.2009.01.039 ↗
57. C.-S. Park, H.-K. Park, H.-S. Shim, T.-W. Na, C.-H. Han, and N.-M. Hwang, Philos. Mag. Lett., 2015, vol. 95, pp. 220–28.10.1080/09500839.2015.1033027 ↗
58. N. Pedrazas, T. Buchheit, E. Holm, and E. Taleff, Mater. Sci. Eng. A, 2014, vol. 610, pp. 76–84.10.1016/j.msea.2014.05.031 ↗
59. H. Park, D.-Y. Kim, N.-M. Hwang, Y.-C. Joo, C.-H. Han, and J.-K. Kim, J. Appl. Phys., 2004, vol. 95, pp. 5515–21.10.1063/1.1712012 ↗
60. K.-J. Ko, J.-T. Park, J.-K. Kim, and N.-M. Hwang, Scripta Mater., 2008, vol. 59, pp. 764–67.10.1016/j.scriptamat.2008.06.021 ↗
61. J. Koo, D. Yoon, and M. Henry, Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1489–91.
62. D. Brandon, Acta Metall., 1966, vol. 14, pp. 1479–84.10.1016/0001-6160(66)90168-4 ↗
63. G. Rohrer, J. Mater. Sci., 2011, vol. 46, pp. 5881–95.10.1007/s10853-011-5677-3 ↗
64. S. Van Boxel, S. Schmidt, W. Ludwig, Y. Zhang, D.J. Jensen, and W. Pantleon, Mater. Trans., 2014, vol. 55, pp. 128–36.10.2320/matertrans.M2013227 ↗