journal article·2021-09

The Effects of Annealing After Equal Channel Angular Extrusion (ECAE) on Mechanical and Magnetic Properties of 49Fe-49Co-2V Alloy

D. F. Susan, A. B. Kustas, R. A. Kellogg, J. D. Carroll, J. R. Michael, I. Karaman

Publisher page

Abstract

Equal channel angular extrusion (ECAE) of 49Fe-49Co-2V, also known as Hiperco® 50A or Permendur-2V, greatly improves the strength and ductility of this alloy, while sacrificing soft magnetic performance. ECAE Hiperco specimens were subjected to post-ECAE annealing in order to improve soft magnetic properties. The microstructure, mechanical properties, and magnetic performance are summarized in this study. Annealing begins above 650°C and a steep decline in yield strength is observed for heat treatments between 700 and 840°C due to grain growth and the Hall-Petch effect, although some strength benefit is still observed in fully annealed ECAE material compared to conventionally processed bar. Soft magnetic properties were assessed through B-H hysteresis curves from which coercivity (Hc) values were extracted. Hc decreases rapidly with annealing above 650°C as well, i.e. improved soft magnetic behavior. The observed trend is attributed to annealing and grain growth in this temperature regime, which facilitates magnetic domain wall movement. The coercivity vs. grain size results generally follow the trend predicted in the literature. The magnetic behavior of annealed ECAE material compares favorably to conventional bar, possibly due to mild crystallographic texturing which enhances properties in the post-ECAE annealed material. Overall, this study highlights a definitive tradeoff between mechanical and magnetic properties brought about by post-ECAE annealing and grain growth. ®Hiperco is a tradename of Carpenter Technology Corp., Reading, PA.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels · Magnetic Properties of Alloys

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (51)

Show source-provided references
1. D.F. Susan, T. Jozaghi, I. Karaman, and J.M. Rodelas: J. Mater. Res., 2018, vol. 33, pp. 2168–75. .10.1557/jmr.2018.142 ↗
2. A.B. Kustas, J.R. Michael, D.F. Susan, I. Karaman, and T. Jozaghi: J. Mater. Res., 2018, vol. 33, pp. 2176–88. .10.1557/jmr.2018.150 ↗
3. T.F. Babuska, M.A. Wilson, K.L. Johnson, S.R. Whetten, J.F. Curry, J.M. Rodelas, C. Atkinson, P. Lu, M. Chandross, B.A. Krick, J.R. Michael, N. Argibay, D.F. Susan, and A.B. Kustas: Acta Mater., 2019, vol. 180, pp. 149–57. .10.1016/j.actamat.2019.08.044 ↗
4. A.B. Kustas, C. Fancher, S. Whetten, D. Dagel, J.R. Michael, and D.F. Susan: Addit. Manuf., 2019, vol. 28, pp. 772–80. .
5. A.B. Kustas, D.F. Susan, K.L. Johnson, S.R. Whetten, M.A. Rodriguez, D.L. Dagel, J.R. Michael, D.M. Keicher, and N. Argibay: Addit. Manuf., 2018, vol. 21, pp. 41–52. .
6. E.P. George, A.N. Gubbi, I. Baker, and L. Robertson: Mater. Sci. Eng. A., 2002, vol. 329, pp. 325–33. .10.1016/S0921-5093(01)01594-5 ↗
7. N.S. Stoloff and I.L. Dillamore: Ordered Alloys: Structural Applications and Physical Metallurgy, B.H. Kear, C.T. Sims, N.S. Stoloff, and J.H. Westbrook, eds. (Claitors, Baton Rouge), 1970, p. 525.
8. N.S. Stoloff and R.G. Davies: Acta Mater., 1964, vol. 12, pp. 473–85. .10.1016/0001-6160(64)90019-7 ↗
9. N.S. Stoloff and R.G. Davies: Prog. Mater. Sci., 1966, vol. 13, pp. 3–84. .
10. C.D. Pitt and R.D. Rawlings: Met. Sci., 1983, vol. 17, pp. 261–6. .10.1179/030634583790420835 ↗
11. D.R. Thornburg: J. Appl. Phys., 1969, vol. 40, pp. 1579–80. .10.1063/1.1657779 ↗
12. T.L. Johnston, R.G. Davies, and N.S. Stoloff: Philos. Mag., 1965, vol. 12, pp. 305–17. .10.1080/14786436508218873 ↗
13. O. Saray, G. Purcek, I. Karaman, T. Neindorf, and H.J. Maier: Mater. Sci. Eng. A., 2011, vol. A528, pp. 6573–83. .10.1016/j.msea.2011.05.014 ↗
14. K. Abib, H. Azzeddine, K. Tirsatine, T. Baudin, A.-L. Helbert, F. Brisset, B. Alili, and D. Bradai: Mater. Charact., 2016, vol. 118, pp. 527–34. .10.1016/j.matchar.2016.07.006 ↗
15. A. Azushima, R. Kopp, A. Korhonen, D.Y. Yang, F. Micari, G.D. Lahoti, P. Groche, J. Yanagimoto, N. Tsuji, A. Rosochowski, and A. Yanagida: CIRP Ann. Manuf. Tech., 2008, vol. 57, pp. 716–35. .10.1016/j.cirp.2008.09.005 ↗
16. Z. Horita, K. Ohashi, T. Fujita, K. Kaneko, and T.G. Langdon: Adv. Mater., 2005, vol. 17, pp. 1599–602. .10.1002/adma.200500069 ↗
17. G. Purcek, H. Yanar, M. Demirtas, Y. Alemdag, D.V. Shangina, and S.V. Dobatkin: Mater. Sci. Eng. A., 2016, vol. A649, pp. 114–22. .10.1016/j.msea.2015.09.111 ↗
18. Z.S. Levin and K.T. Hartwig: Mater. Sci. Eng. A., 2015, vol. A635, pp. 94–101. .10.1016/j.msea.2015.02.025 ↗
19. E. Hug, O. Hubert, and I. Guillot: J. Magn. Magn. Mater., 2000, vol. 215–216, pp. 197–200. .10.1016/S0304-8853(00)00115-3 ↗
20. L. Wießner, T. Gröb, E. Bruder, P. Groche, and C. Müller: Appl. Mech. Mater., 2015, vol. 794, pp. 152–9. .10.4028/www.scientific.net/AMM.794.152 ↗
21. B. Nabi, A.-L. Helbert, F. Brisset, R. Batonnet, G. Andre, T. Waeckerle, and T. Baudin: Mater. Sci. Eng. A., 2014, vol. A592, pp. 70–6. .10.1016/j.msea.2013.10.093 ↗
22. B. Nabi, A.-L. Helbert, F. Brisset, G. Andre, T. Waeckerle, and T. Baudin: Mater. Sci. Eng. A., 2013, vol. A578, pp. 215–21. .10.1016/j.msea.2013.04.066 ↗
23. L. Ren, S. Basu, R.H. Yu, J.Q. Xiao, and A. Parvizi-Majidi: J. Mater. Sci., 2001, vol. 36, pp. 1451–7. .10.1023/A:1017588411888 ↗
24. R.H. Yu, S. Basu, Y. Zhang, A. Parvizi-Majidi, and J.Q. Xiao: J. Appl. Phys., 1999, vol. 85, pp. 6655–9. .10.1063/1.370175 ↗
25. C.H. Shang, R.C. Cammarata, T.P. Weihs, and C.L. Chien: Jpn. Mater. Res., 2000, vol. 15, pp. 835–7. .10.1557/JMR.2000.0118 ↗
26. R.T. Fingers, R.P. Carr, and Z. Turgut: J. Appl. Phys., 2002, vol. 91, pp. 7848–50. .10.1063/1.1453939 ↗
27. L. Zhao and I. Baker: Acta Met. Mater., 1994, vol. 42, pp. 1953–8. .10.1016/0956-7151(94)90020-5 ↗
28. G. Herzer: IEEE Trans. Magn., 1990, vol. 26, pp. 1397–402. .10.1109/20.104389 ↗
29. C. Kuhrt and L. Schultz: J. Appl. Phys., 1992, vol. 71, pp. 1896–900. .10.1063/1.351177 ↗
30. F. Pfeifer and C. Radeloff: J. Magn. Magn. Mater., 1980, vol. 19, pp. 190–207. .10.1016/0304-8853(80)90592-2 ↗
31. R.H. Yu, S. Basu, L. Ren, Y. Zhang, A. Parvizi-Majidi, K.M. Unruh, and J.Q. Xiao: IEEE Trans. Magn., 2000, vol. 36, pp. 3388–93. .10.1109/20.908809 ↗
32. Carpenter Technology Technical Data Sheet Hiperco 50A Alloy (2008). http://www.cartech.ides.com/datasheet.
33. ASTM A773/774M-14, Annual Book of ASTM Standards, 2014, vol. 3, pp. 1–12.
34. D.I. Bardos: J. Appl. Phys., 1969, vol. 40, pp. 1371–2. .10.1063/1.1657673 ↗
35. D.W. Clegg and R.A. Buckley: Met. Sci., 1973, vol. 7, pp. 48–54. .10.1179/030634573790445541 ↗
36. T. Sourmail: Prog. Mater. Sci., 2005, vol. 50, pp. 816–60. .10.1016/j.pmatsci.2005.04.001 ↗
37. R.W. Hertzberg: Deformation and Fracture Mechanics of Engineering Materials. 4th ed. Wiley, New York, 1996, pp. 185–93.
38. F.R. Larson and J. Miller: Trans. ASME., 1952, vol. 74, p. 765. .
39. ASTM A801-14, ASTM International, West Conshohocken, PA, 2014.
40. R.C. Hall: J. Appl. Phys., 1960, vol. 157, pp. 157S-158S. .10.1063/1.1984643 ↗
41. M.J. Marcinkowski and R.M. Polaik: Acta Metall., 1964, vol. 12, pp. 179–90. .10.1016/0001-6160(64)90186-5 ↗
42. F. Landgraf, J. da Silveira, and D. Rodrigues Jr.: J. Magn. Mag. Mater., 2011, vol. 323, pp. 2335–9. .10.1016/j.jmmm.2011.03.034 ↗
43. R.D. Rawlings, R.V. Major, and C.M. Orrock, United States Patent No. 4,933,026, U.S. Patent Office, 1990.
44. R.H. Yu, S. Basu, Y. Zhang, and J.Q. Xiao: J. Appl. Phys., 1999, vol. 85, pp. 6034–6. .10.1063/1.369073 ↗
45. D. Gautard, G. Couderchon, and L. Coutu: J. Magn. Magn. Mat., 1996, vol. 160, pp. 359–60. .10.1016/0304-8853(96)00230-2 ↗
46. E. Adler and H. Pfeiffer: IEEE Trans. Magn. Mag., 1974, vol. 10, pp. 172–4. .10.1109/TMAG.1974.1058314 ↗
47. S. Liu, S. Bauser, Z. Turgut, J. Coate, and R.T. Fingers: J. Appl. Phys., 2003, vol. 93, pp. 7118–20. .10.1063/1.1555335 ↗
48. R.V. Major and V. Samadian: J. Mater. Eng., 1989, vol. 11, pp. 27–30. .10.1007/BF02833750 ↗
49. B.D. Cullity and C.D. Graham: Introduction to Magnetic Materials. 2nd ed. Wiley, Hoboken, 2009, pp. 360–4.
50. F.E. Luborsky: J. Appl. Phys., 1961, vol. 32, p. 171S. .10.1063/1.2000392 ↗
51. C.-W. Chen: Magnetism and Metallurgy of Soft Magnetic Materials. Dover Inc., New York, 1986.