journal article·2021-09

The Mechanism for Coarse Nb-Rich Particle Formation in Steel

Sunday Abraham, Rick Bodnar, Johan Lonnqvist, Joacim Hagström, Eleonora Rydgren

Publisher page

Abstract

Fine and coarse Nb-containing particles (Nb(C,N) and NbC) can be found in steel alloyed with niobium. The fine Nb-containing particles (precipitates) are of the order of several nanometers, typically ≤ 50 nm, in diameter, while the coarse Nb-containing particles (coarse Nb-rich particles) can have lengths ranging from submicron to hundreds of microns. The mechanism for the formation of the fine niobium carbide or carbonitride precipitates is well established, and their beneficial effects on strength and toughness are well documented. On the other hand, coarse Nb-rich particles are detrimental to the performance of the steel. Despite the plethora of studies on coarse Nb-rich particles, no experimental evidence has been offered for the proposed mechanisms of their formation. In this paper, the results of detailed and comprehensive experimental work that provide a novel understanding of the mechanism of formation of coarse Nb-rich particles are presented.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. F.W. Starratt: J. Met., 1958, p. 799.10.1007/BF03398273 ↗
2. L. Meyer: Niobium Science and Technology, TMS, 2001, pp. 359-77.
3. W.B. Morrison: Mater. Sci. and Tech., 2009, vol. 25, pp. 1066-73.10.1179/174328409X453299 ↗
4. H. Kajioka: How to Use Niobium for Improvement of Steel Properties, Edited by H. Takechi, CBMM Asia, 2010, pp. 1-27.
5. J.M. Gray, D. Webster, and J.H. Woodhead: JISI, 1965, vol. 203, pp. 812-8.
6. A.J. DeArdo, J.M. Gray, and L. Meyer: Proc. of the Int. Symp. on Niobium, H. Stuart, ed., TMS, 1984, pp. 685-759.
7. M.S. Dyer: “Study of Microalloy Precipitation in Hot Charged Slabs,” M.S. Thesis, 2010, Colorado School of Mines, Colorado, U.S.A.
8. J.G. Speer, J.R. Michael, and S.S. Hansen: Metall. Trans. A, 1987, vol. 18A, pp. 211-21.10.1007/BF02825702 ↗
9. A.J. DeArdo: Int. Mater. Rev., 2003, vol. 48, no. 6, pp. 371-402.10.1179/095066003225008833 ↗
10. J.L. Verger-Gaugry, G. Ocampo, and J.D. Embury: Metallography, vol. 18, 1985, pp. 381-93.10.1016/0026-0800(85)90006-0 ↗
11. G. Krapf, E.G. Buyok, W.R. Bandi, and L.M. Melnick: J. Iron and Steel Inst., 1973, pp. 353-56.
12. E.T. Turkdogan: I&SM, 1989, pp. 61-75.10.1515/ijsl.1989.75.61 ↗
13. S. Tao, F. Wang, G. Sun, Z. Yang, and C. Li: Metall. and Mater. Trans. A, 2015, vol. 46A, pp. 3670-6.10.1007/s11661-015-2922-4 ↗
14. S.G. Hong, K.B. Kang, and C.G. Park: Acta Mater., 2002, no. 46, pp. 163-8.10.1016/S1359-6462(01)01214-3 ↗
15. S.H. Park, S. Yue, and J.J. Jonas: Metall. Trans. A, 1992, vol. 23A, pp. 1641-51.10.1007/BF02804360 ↗
16. S. Okaguchi and T. Hashimoto: ISIJ Int., 1992, vol 32, no. 3, pp. 283-90.10.2355/isijinternational.32.283 ↗
17. M. Perez, M. Dumont, and D. Acevedo-Reyes: Acta Mater., 2008, no. 56, pp. 2119-32.10.1016/j.actamat.2007.12.050 ↗
18. B. Dutta, E.J. Palmiere, and C.M. Sellars: Acta Mater. Inc., Elsevier Sci. Ltd., 2001, no. 49, pp. 785-94.10.1016/S1359-6454(00)00389-X ↗
19. C. Zhou and R. Priestner: ISIJ Int., 1996, vol. 36, no. 11, pp. 1397-405.10.2355/isijinternational.36.1397 ↗
20. C. Klinkenberg, K. Hulka, and W. Bleck: Steel Res. Int., 2004, vol. 75, pp. 743-6.10.1002/srin.200405837 ↗
21. H.R. Wang and W. Wang: J. Mater. Sci., 2009, vol. 44, pp. 591-600.10.1007/s10853-008-3069-0 ↗
22. J. Jung, J. Park, J. Kim, and Y. Lee: Mater. Sci. and Eng. A, 2011, vol. 528, pp. 5529-35.10.1016/j.msea.2011.03.086 ↗
23. P. Gong, E.J. Palmiere, and W.M. Rainforth: Acta Mater., 2015, vol. 97, pp. 392-403.10.1016/j.actamat.2015.06.057 ↗
24. R. Okamoto, A. Borgenstam, and J. Agren: Acta Mater. Inc., 2010, vol. 58, pp. 4783-90.10.1016/j.actamat.2010.05.014 ↗
25. E. Courtois, T. Epicier, and C. Scott: Micron, 2006, vol. 37, pp. 492-502.10.1016/j.micron.2005.10.009 ↗
26. K. Taylor: Scripta Metall. et Mater., 1995, vol. 32, no. 1, pp. 7-12.10.1016/S0956-716X(99)80002-8 ↗
27. N. Fujita and H.D.H. Bhadehia: Mater. Sci. and Tech., 2001, vol. 17, pp. 403-8.10.1179/026708301101510122 ↗
28. R. Phillips, W.E. Duckworth, F.E.L. Copley: J. Iron and Steel Inst., 1964, vol. 202, pp. 593-600.
29. R.P. DeVries: Proc. of Electric Furnace Conf., ISS, 1960, pp. 114-33.
30. R. Brook: J. Iron and Steel Inst., 1965, vol. 203, p. 1040.
31. N.E. Hannerz, U. Lindborg, and B. Lehtinen: J. Iron and Steel Inst., 1968, vol. 206, pp. 68-73.
32. S. Kheirandish and A. Noorian: J. Iron and Steel Res. Int., 2008, vol. 15, no. 4, pp. 61-6.10.1016/S1006-706X(08)60145-4 ↗
33. I. Hrivnak: Kovove Materially, 1973, vol. 11, pp. 136-43.
34. O. Dremailova, V.Y. Gertsman, J. Li, and J.T. Bowker: “Analysis of Nb-rich and Ti-rich Melt Additions and J55 Steel,” CANMET-MTL, MTL 2005-4(CF), February 2005.
35. S. Abraham, R. Klein, R. Bodnar, and O. Dremailova: MS&T 2006 Steel-Related Papers, AIST, 2006, pp. 501-19.
36. S. Abraham, R. Klein, R. Bodnar, and O. Dremailova: MS&T 2006 Steel-Related Papers, AIST, 2006, pp. 521-534.
37. “Formation of Fe-Nb-C Eutectic Phases During Continuous Slab Casting,” NiobelCon report, October 1, 2008.
38. C.G. Schön, and A.S. Tenório: Intermetallics, vol. 4, 1996, pp. 211-6.10.1016/0966-9795(95)00035-6 ↗
39. Q. Tian, Y. Chen, J. Chen, G. Xu, and Y. Zheng: MS&T Conf. Proc., 2006, pp. 393-9.
40. S. Kheirandish and A. Noorian: J. Iron & Steel Res. Int., vol. 15, no. 4, 2008, pp 61-6.10.1016/S1006-706X(08)60145-4 ↗
41. C. Chang and J. Sengupta: AISTech, 2014 Conf. Proc., AIST, 2014, pp. 3043-51.
42. S. Nafisi, A. Den Boer, and L. Collins: AISTech, 2014 Conf. Proc., AIST, 2014, pp. 1590-8.
43. G. Krapf, E.G. Buyok, W.R. Bandi, and L.M. Melnick: J. Iron & Steel Int., 1973, pp. 353-56.
44. F. Vodopivec, M. Gabrovsek, and B. Ralic: Met. Sci., 1975, vol. 9, pp. 324-6.10.1179/030634575790444694 ↗
45. V.K. Heikkinen and R.H. Packwood: Scand. J. of Metall., 1977, vol. 6, pp. 170-5.
46. S. Matsui, S. Sato, and T. Tanaka: Precipitation Limit of the Nb(C,N) Eutectic Colonies, 102nd ISIJ Meeting, November 1981.
47. T. Gladman and E.F. Walker: Proc. of the Int. Symp. on Niobium, H. Stuart, ed., TMS, 1984, pp. 1061-79.
48. R.F. Cappellini, R.L. Bodnar, T.D. Nelson and K.F. Reppert: First International Conference on Improved Coal-Fired Power Plants, A. Armor, W. Bakker, R. Jaffee and G. Touchton, eds., EPRI CS-5581-SR, 1988, pp. 5-255 –85.
49. A.A. Filippenkov, A.G. Ryzhkov, V.V. Popov, A.E. Aksel’rod, V.I. Novik, and V.V. Burkhovetski: Steel in the USSR, 1991, vol. 21, pp. 86-7.
50. C.L. Davis and M. Strangwood: Mater. Sci. and Tech., 2009, vol. 25, no. 9, pp. 1126-33.10.1179/174328409X453262 ↗
51. R.A. Mesquita: Microscopy Analysis of Undissolved Particles in a Nb-Ti Microalloyed Steel, RAF Consulting, Technical Report 02/2010.
52. R.A. Mesquita: Large Particles in a Nb-Ti Microalloyed Steel: Part 2 – Transmission Electron Microscopy Analysis, RAF Consulting, Technical Report 07/2010.
53. M.C. Carboni, R.A. Mesquita, E.B. Cruz, D.P. Fridman, and M.A.S. Nogueira: 42nd Int. Steelmaking Seminar Proc., 2011, pp. 476-88.
54. J. Bernetic, B. Bradaskja, G. Kosec, E. Bricelj, B. Kostec, F. Vodopivec, and L. Kosec, Metallurgija: 2010, vol. 49, no. 1, pp. 29-32.
55. M. Sharma, S. Richter, U. Prahl, and W. Bleck: Steel Res. Int., 2017, vol. 88, no. 10, paper no. 1700092, pp. 1-12.10.1002/srin.201700092 ↗
56. A. Maitre, D.G. Ivey, and H. Henein: MS&T Conf. Proc., 2014, pp. 679-86.
57. C.I. Garcia and A. Perea-Garduno: The 2nd Int. Symp. on the Recent Developments in Plate Steels, AIST, 2018, pp. 287-96.
58. R.A. Mesquita: The 2nd Int. Symp. on the Recent Developments in Plate Steels, AIST, 2018, pp. 317-328.
59. J. Cheng, Z. Wang, Y. Xue, Z. Wang, B. Zhou, and S. Tao: “HSLA Steels: Metallurgy and Applications, J.M. Gray, T. Ko, Z. Shouhua, W. Baorong, and X. Xishan, eds., ASMI, 1986, pp. 771-5.
60. A.K. Bhambri, T.Z. Kattamis, and J.E. Morral: Metall. Trans. B, 1975, vol. 6B, pp. 523-37.10.1007/BF02913844 ↗
61. R. Kesri, and M. Durand-Charre: J. Mater. Sci., 1987, vol. 22, p. 2959-64.10.1007/BF01086497 ↗
62. S.C. Fegan, T.Z. Kattamis, and J.E. Morral: J. Mater. Sci., 1975, vol. 10, pp. 1266-70.10.1007/BF00541420 ↗
63. F. Jeglitsch: Niobium Sci. & Tech., TMS, 2001, pp. 1001-39.
64. S. Wilmes and G. Zwick: 6th Int. Tooling Conference Proc., 2002, pp. 269-87.
65. D. Jarreta and M. Wright: CAMS 2014, November 2014.
66. I. Garcia: The Effect of Coarse NbC Particles and Final Microstructure on the HIC Behavior and X65/X70 Steel Plates for Sour Gas Applications, presented at the AIST Joint Plate Rolling/Metallurgy – Processing, Products, and Applications Technology Committee meeting, Greensboro, NC, March 3 & 4, 2020.
67. C.I. Garcia and A.J. DeArdo: Microstructural Analysis of Low-C, High-Nb Continuously Cast Steels, submitted to G. Tither, Reference Metals Co., 1998.
68. R. Mendoza, J. Huante, M. Alanis, C. Gonzalez-Rivera, and J.A. Juarez-Islas: Iron and Steelmaking, 1999, vol. 26, no. 3, pp. 205-9.10.1179/030192399677086 ↗
69. R. Mendoza, J. Hunate, V. Camacho, O. Alvarez-Fregoso, and J.A. Juarez-Islas: J. Mater. Eng. and Perform., 1999, vol. 8, no. 5, pp. 549-55.10.1007/s11665-999-0008-4 ↗
70. B-J. Lee: Metall. and Mater. Trans. A, 2001, vol. 32A, pp. 2423-39.10.1007/s11661-001-0033-x ↗
71. P.H. Li, A.K. Ibraheem and R. Priestner: Mater. Sci. Forum, 1998, vols. 284-286, pp. 517-24.10.4028/www.scientific.net/MSF.284-286.517 ↗
72. J. Miettinen: Metall. and Mater. Trans. B, 1997, vol. 28B, pp. 281-97.10.1007/s11663-997-0095-2 ↗
73. M. Gustavo, D.V. Cuppari and S.F. Santos: Metals, 2016, vol. 6, no. 250, pp. 1-17.
74. E. Paul: Bulletin of Alloy Phase Diagrams, vol. 7, No. 3, 1986, pp. 246-53.10.1007/BF02869000 ↗
75. A.W. Den Boer: Characterization of Ferroniobium and the Thermodynamics and Kinetics of Dissolution of Niobium Compounds in Liquid Iron, Master Thesis, 2013, McMaster University, Hamilton, Canada.
76. S.J.A. Shah, H. Henein, and D.G. Ivey: Mater. Character., 2013, vol. 78, pp. 96-107.10.1016/j.matchar.2012.11.013 ↗
77. A.W. Den Boer and D.V. Malakhov: Canad. Metallurg. Quarterly, 2014, vol. 53, no. 4, pp. 423-31.10.1179/1879139514Y.0000000134 ↗
78. S.A. Argyropoulos and P.G. Sismanis: Metall. Trans. B, 1991, vol. 22B, no. 4, pp. 417-27.10.1007/BF02654280 ↗
79. S.A. Argyropoulos and R.I.L. Guthrie: 65th Steelmaking Conf. Proc., ISS, 1982, vol. 65, pp. 156-67.
80. S.A.Argyropoulos: I&SM, 1984, pp. 48-57.10.1007/BF00320719 ↗
81. S.A. Argyropoulos: 42nd Electric Furnace Conf. Proc., ISS, 1984, vol. 42, pp. 133-48.
82. C. Guimaraes: Niobium Ferroalloy and Niobium Additive for Steels, Cast Irons, and Other Metallic Alloys, International Patent No. WO 92/22675, granted December 23, 1992.
83. L. Gourtsoyannis, R.I.L. Guthrie, and G.A. Ratz: 42nd Electric Furnace Conf. Proc., ISS, 1984, vol. 42, pp. 119-32.
84. Y. Iguchi, N. Nobori, K. Saito, and T. Fuwa: Tetsu-to-Hagané, 1982, vol. 68, no. 6, pp. 89-96.10.2355/tetsutohagane1955.68.6_633 ↗
85. M. Volmer and A. Weber: Z. Phys. Chem., 1926, vol. 119, pp. 277-301.10.1515/zpch-1926-11927 ↗
86. R. Becker and W. Döring: Ann. Phys., 1935, vol. 24, pp. 719-52.10.1002/andp.19354160806 ↗
87. J. Frenkel: J. Chem. Phys., 1939, vol. 7, no. 7, pp. 538-47.10.1063/1.1750484 ↗
88. S. Karthika, T. K. Radhakrishman and P. Kalaichelvi: Cryst. Growth Des., 2016, vol. 16, pp. 6663-81.10.1021/acs.cgd.6b00794 ↗
89. M. Perez, M. Dumont and D. Acevedo-Reyes: Acta Mater., 2008, pp. 2119-32.10.1016/j.actamat.2007.12.050 ↗
90. R. Kikuchi: J. Chem. Phys., 1967, vol. 47, no.5, pp. 1647-52.
91. D. Turnbull and J. C. Fisher: J. Chem. Phys., 1949, vol. 17, pp. 71-3.10.1063/1.1747055 ↗
92. E.T. Turkdogan: J. Iron and Steel Inst., 1972, pp. 21-36.10.1063/1.1654209 ↗
93. C.K. Sigmworth and J. F. Elliott, Metallur. Trans., 1973, vol. 4, pp. 105-13.10.1007/BF02649609 ↗
94. D.W. Oxtoby: J. Phys.: Condens. Matter, 1992, vol. 4, pp. 7627-50.
95. D.W. Oxtoby: Acc. Chem. Res., 1998, vol. 31, pp. 91-7.10.1021/ar9702278 ↗
96. K. Helen: Deoxidation Mechanisms in Liquid Steel, Ph.D. Thesis, 1996, Sheffield Hallam University, Sheffield, UK.
97. O.M. Adaba: Oxide Inclusion Evolution and Factors that Influence their Size and Morphology, Ph.D. Thesis, 2019, Missouri S&T, Rolla, Missouri, U.S.A.
98. K. Wasai and K. Mukai: Metall. and Mater. Trans. B, 1999, vol. 30B, pp. 1065-74.10.1007/s11663-999-0112-8 ↗
99. W.L. Worrell and J. Chipman: TMS, AIME, vol. 230, pp. 1682-6.
100. W.L. Worrell and J. Chipman: J. Chem. Phys., vol. 68, no. 4, 1964, pp. 860-6.10.1021/j100786a027 ↗