Effect of Beam Oscillation on Electron Beam Butt Welded Dual-Phase (DP600) Steel to 5754 Aluminum Alloy Joints
Source abstract
Abstract
Butt welding of DP600 steel to 5754 aluminum alloy using electron beam welding is performed using an oscillating beam by changing its diameter at a fixed frequency. The performance of the welding joint is evaluated using electron backscatter diffraction (EBSD) texture, energy dispersive spectroscopy (EDS), and residual stresses measurement. Beam oscillation at optimum diameter produced more deformable texture fiber components than that obtained without oscillation joints. The oscillating beam demonstrated 70 pct higher elongation and almost double impact toughness than those reported by its non-oscillating counterpart. Oscillation diameter beyond an optimum value revealed a tendency to form weaker joints with deteriorated elongation and impact strength.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (45)
Show source-provided references
1. Y. Li, Y. Liu, and J. Yang: Opt. Laser Technol., 2020, vol. 122, p. 105875.10.1016/j.optlastec.2019.105875 ↗
2. S.K. Dinda, W. Kockelmann, G.G. Roy, and P. Srirangam: Int. J. Adv. Manuf. Technol., 2020, vol. 108, pp. 1499–1508.10.1007/s00170-020-05484-7 ↗
3. R. Nandan, T. DebRoy, and H.K.D.H. Bhadeshia: Prog. Mater. Sci., 2008, vol. 53, pp. 980–1023.10.1016/j.pmatsci.2008.05.001 ↗
4. J. Sun, Q. Yan, W. Gao, and J. Huang: Mater. Des., 2015, vol. 83, pp. 120–8.10.1016/j.matdes.2015.05.069 ↗
5. R.K. Shiue, S.K. Wu, and Y.L. Lee: Intermetallics, 2005, vol. 13, pp. 818–26.10.1016/j.intermet.2005.01.005 ↗
6. K.H. Chang and C.H. Lee: Int. J. Adv. Manuf. Technol., 2009, vol. 41, pp. 250–8.10.1007/s00170-008-1487-4 ↗
7. O. Anderoglu: Masters Thesis, Texas A&M Uni., 2004, pp. 1–64.
8. S. Kou: Welding Metallurgy, Second Edi., John Wiley & Sons., Hoboken, New Jersey, 2003.
9. B. Bandi, S.K. Dinda, J. Kar, G.G. Roy, and P. Srirangam: Vacuum, 2018, vol. 158, pp. 172–9.10.1016/j.vacuum.2018.09.060 ↗
10. J. Kim and Y. Kawamura: Scr. Mater., 2007, vol. 56, pp. 709–12.10.1016/j.scriptamat.2006.12.046 ↗
11. H. AghajaniDerazkola and F. Khodabakhshi: Int. J. Adv. Manuf. Technol., 2019, vol. 100, pp. 2401–22.10.1007/s00170-018-2879-8 ↗
12. Y. Zhang, J. Huang, H. Chi, N. Cheng, Z. Cheng, and S. Chen: Mater. Lett., 2015, vol. 156, pp. 7–9.10.1016/j.matlet.2015.04.128 ↗
13. R.P. Singh, S. Kumar, S. Dubey, and A. Singh: Mater. Today. doi:10.1016/.j.matpr.2020.05.521, 202010.1016/.j.matpr.2020.05.521 ↗
14. N. Farabi, D.L. Chen, and Y. Zhou: J. Alloys Compd., 2011, vol. 509, pp. 982–9.10.1016/j.jallcom.2010.08.158 ↗
15. W. Liu, J. Ma, M. MazarAtabaki, and R. Kovacevic: Mater. Des., 2015, vol. 68, pp. 146–57.10.1016/j.matdes.2014.12.028 ↗
16. S. S.A. Lone, and S. Banday: Int. J. Tech. Innov. Mod. Eng. Sci., 2019, vol. 5, pp. 882-93.
17. What are the advantages of flash (butt) welding? www.twi-global.com/technical-knowledge/faqs/faq-what-are-the-advantages-of-flash-butt-welding. Accessed 26 Jan 2020
18. J. Kar, S.K. Roy, and G.G. Roy: Int. J. Adv. Manuf. Technol., 2018, vol. 94, pp. 4531–41.10.1007/s00170-017-1169-1 ↗
19. J. Kar, D. Chakrabarti, S.K. Roy, and G.G. Roy: J. Mater. Process. Technol., 2019, vol. 266, pp. 165–72.10.1016/j.jmatprotec.2018.10.040 ↗
20. M. Kraetzsch, J. Standfuss, A. Klotzbach, J. Kaspar, B. Brenner, and E. Beyer: Phys. Procedia, 2011, vol. 12, pp. 142–49.10.1016/j.phpro.2011.03.018 ↗
21. P.F. Fu, Z.Y. Mao, Y.J. Wang, Z.Y. Tang, and C.J. Zuo: Vacuum, 2015, vol. 121, pp. 230–5.10.1016/j.vacuum.2015.08.025 ↗
22. P. Fu, Z. Mao, C. Zuo, Y. Wang, and C. Wang: Chinese J. Aeronaut., 2014, vol. 27, pp. 1015–21.10.1016/j.cja.2014.03.020 ↗
23. P.G. Klemens: J. Appl. Phys., 1976, vol. 47, pp. 2165–74.10.1063/1.322866 ↗
24. X. Wang, S. Mao, P. Chen, Y. Liu, J. Ning, H. Li, K. Zang, Z. Zhang, and X. Han: Mater. Des., 2016, vol. 90, pp. 230–7.10.1016/j.matdes.2015.10.134 ↗
25. N.K. Babu, S.G.S. Raman, C.V.S. Murthy, and G.M. Reddy: Sci. Technol. Weld. Join., 2005, vol. 10, pp. 583–90.10.1179/174329305X57473 ↗
26. S.K. Dinda, J.M. Warnett, M.A. Williams, G.G. Roy, and P. Srirangam: Mater. Des., 2016, vol. 96, pp. 224–31.10.1016/j.matdes.2016.02.010 ↗
27. S.K. Dinda, J. Kar, S. Jana, G.G. Roy, and P. Srirangam: J. Mater. Process. Technol., 2019, vol. 265, pp. 191–200.10.1016/j.jmatprotec.2018.10.026 ↗
28. A. Mathieu, R. Shabadi, A. Deschamps, M. Suery, S. Matteï, D. Grevey, and E. Cicala: Opt. Laser Technol., 2007, vol. 39, pp. 652–61.10.1016/j.optlastec.2005.08.014 ↗
29. Struers US: Material Safety Data Sheet, 2012, vol. 4 (2), pp. 8–10.
30. ASTM Int.: Astm, 2009, pp. 1–27.
31. ASTM: Am. Soc. Test. Mater. Handb., 2007, vol. 14, p. 28.
32. R.A. Dunlap and K. Dini: Can. J. Phys., 1985, vol. 63, pp. 1267–9.10.1139/p85-208 ↗
33. K.K. Mathur, A. Needleman, and V. Tvergaard: Model. Simul. Mater. Sci. Eng., 1994, vol. 2, pp. 617–35.10.1088/0965-0393/2/3A/014 ↗
34. C.B. Fuller, A.R. Krause, D.C. Dunand, and D.N. Seidman: Mater. Sci. Eng. A, 2002, vol. 338, pp. 8–16.10.1016/S0921-5093(02)00056-4 ↗
35. W.D. Antunes, M. Sergio, and F. De Lima: Soldag. Inspeçao, 2016, vol. 21, pp. 379–86.10.1590/0104-9224/SI2103.12 ↗
36. S. Suwas R.K. Ray: Engineering Materials and Processes Crystallographic Texture of Materials, 2016.
37. S.K. Dinda, Md.B. Sk, G.G. Roy, and P. Srirangam: Mater. Sci. Eng.: A, 2016, vol. 677, pp. 182–92.10.1016/j.msea.2016.09.050 ↗
38. J. Chen, X. Yuan, Z. Hu, C. Sun, Y. Zhang, and Y. Zhang: Mater. Charact., 2016, vol. 120. 45-5210.1016/j.matchar.2016.08.015 ↗
39. R. Indhu, S. Divya, M. Tak, and S. Soundarapandian: Procedia Manuf., 2018, vol. 26, pp. 495–502.10.1016/j.promfg.2018.07.058 ↗
40. H. Das, R.N. Ghosh, and T.K. Pal: Met. Mat. Trans. A: Phys. Met. Mat. Sci., 2014, vol. 45, pp. 5098–106.10.1007/s11661-014-2424-9 ↗
41. S.Y. Anaman, H.H. Cho, H. Das, J.S. Lee, and S.T. Hong: Mater. Charact., 2019, vol. 154, pp. 67–79.10.1016/j.matchar.2019.05.041 ↗
42. N.K. Babu, S.G.S. Raman, C.V.S. Murthy, and G.M. Reddy: Mater. Sci. Eng. A, 2007, vol. 471, pp. 113–9.10.1016/j.msea.2007.03.040 ↗
43. G.M. Reddy, C.V.S. Murthy, K.S. Rao, and K.R. Rao: Int. J. Adv. Manuf. Technol., 2009, vol. 43, pp. 671–80.10.1007/s00170-008-1751-7 ↗
44. J. Kar, S.K. Roy, and G.G. Roy: J. Mater. Process. Technol., 2016, vol. 233, pp. 174–85.10.1016/j.jmatprotec.2016.03.001 ↗
45. R. Rai, T.A. Palmer, J.W. Elmer, and T. Debroy: Welding Journal., 2009. vol.88, pp. 54-61s.