journal article·2020-09

Analysis of Martensitic Transformation Plasticity Under Various Loadings in a Low-Carbon Steel: An Elastoplastic Phase Field Study

Xing Zhang, Gang Shen, Jun Xu, Jianfeng Gu

Publisher page

Abstract

An elastoplastic phase field model for the martensitic transformation of a Fe-0.22C-1.58Mn-0.81Si (wt pct) alloy was developed, to investigate transformation plasticity in response to uniaxial, biaxial, shear and axial-shear loadings below half the yield strength of austenite. The simulation results clearly demonstrate the preferential orientation of martensite variants as well as plastic behavior during transformation. The data also suggest that the transformation plasticity coefficient is independent of external stress. Preferential orientation can occur under both axial and shear loading conditions, and the equivalent values of transformation plastic strains are roughly the same regardless of the stress components in the combined axial and shear loadings. Similar microstructural evolution and deformation behaviors were identified in response to both uniaxial and biaxial loadings when the uniaxial stress was equal to the difference in applied stresses along both axes during biaxial loading. The Magee mechanism is considered to play a predominant role in martensitic transformation plasticity, although both the Magee and Greenwood-Johnson mechanisms can be identified through simulations. This work demonstrates that the accumulated plastic strain in martensite is primarily inherited from the parent austenite phase, with only a negligible portion due to the yielding of martensite.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Magnetic Properties and Applications

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (56)

Show source-provided references
1. F. Barbe, R. Quey and L. Taleb: Eur. J. Mech. A Solids, 2007, vol. 26, pp. 611-625.10.1016/j.euromechsol.2006.09.005 ↗
2. G. W. Greenwood and R. Johnson: Proc. R. Soc. Lond. A, 1965, vol. 283, pp. 403-422.10.1098/rspa.1965.0029 ↗
3. H. Han, J. Lee, D.-W. Suh and S.-J. Kim: Philos. Mag., 2007, vol. 87, pp. 159-176.10.1080/14786430600953731 ↗
4. H. N. Han, S.-J. Kim, M. Kim, G. Kim, D.-W. Suh and S.-J. Kim: Philos. Mag., 2008, vol. 88, pp. 1811-1824.10.1080/14786430802320119 ↗
5. C. L. Magee: Carnegie Inst. of Tech.: Pittsburgh, p. 309.
6. S. Grostabussiat, L. Taleb, J. F. Jullien and F. Sidoroff: J. Phys. IV France, 2001, vol. 11, pp. 173-180.10.1051/jp4:2001422 ↗
7. T. Otsuka, T. Akashi, S. Ogawa, T. Imai and A. Egami: J. Soc. Mater. Sci., 2011, vol. 60, pp. 937-942.10.2472/jsms.60.937 ↗
8. Y. Liu, S. Qin, J. Zhang, Y. Wang, Y. Rong, X. Zuo and N. Chen: Metall. Mater. Trans. A, 2017, vol. 48, pp. 4943-4956.10.1007/s11661-017-4230-7 ↗
9. J.-B. Leblond: Int. J. Plast., 1989, vol. 5, pp. 573-591.10.1016/0749-6419(89)90002-8 ↗
10. J.-B. Leblond, J. Devaux and J. Devaux: Int. J. Plast., 1989, vol. 5, pp. 551-572.10.1016/0749-6419(89)90001-6 ↗
11. J.-C. Videau, G. Cailletaud, and A. Pineau: J. Phys. IV, vol. 6(1), pp. 465-474 (1996).
12. T. Otsuka, R. Brenner and B. Bacroix: Int. J. Eng. Sci., 2018, vol. 127, pp. 92-113.10.1016/j.ijengsci.2018.02.008 ↗
13. M. Coret, S. Calloch and A. Combescure: Int. J. Plast., 2002, vol. 18, pp. 1707-1727.10.1016/S0749-6419(01)00067-5 ↗
14. M. Coret, S. Calloch and A. Combescure: Eur. J. Mech. A Solids, 2004, vol. 23, pp. 823-842.10.1016/j.euromechsol.2004.04.006 ↗
15. L. Taleb and F. Sidoroff: Int. J. Plast., 2003, vol. 19, pp. 1821-1842.10.1016/S0749-6419(03)00020-2 ↗
16. Y. El Majaty, J.-B. Leblond and D. Kondo: J. Mech. Phys. Solids, 2018, vol. 121, pp. 175-197.10.1016/j.jmps.2018.07.014 ↗
17. D. Weisz-Patrault: J. Mech. Phys. Solids, 2017, vol. 106, pp. 152-175.10.1016/j.jmps.2017.05.019 ↗
18. M. Wolff, M. Böhm, M. Dalgic, G. Löwisch, N. Lysenko and J. Rath: Comput. Mater. Sci., 2006, vol. 37, pp. 37-41.10.1016/j.commatsci.2005.12.007 ↗
19. F.-D. Fischer, G. Reisner, E. Werner, K. Tanaka, G. Cailletaud and T. Antretter: Int. J. Plast., 2000, vol. 16, pp. 723-748.10.1016/S0749-6419(99)00078-9 ↗
20. M. Coret and A. Combescure: J. Phys. IV France, 2004, vol. 120, pp. 177-183.
21. L. Taleb and S. Petit: Int. J. Plast., 2006, vol. 22, pp. 110-130.10.1016/j.ijplas.2005.03.012 ↗
22. H.-G. Lambers, S. Tschumak, H. Maier and D. Canadinc: Mater. Sci. Eng. A, 2010, vol. 527, pp. 625-633.10.1016/j.msea.2009.08.038 ↗
23. S. Meftah, F. Barbe, L. Taleb and F. Sidoroff: Eur. J. Mech. A Solids, 2007, vol. 26, pp. 688-700.10.1016/j.euromechsol.2006.10.004 ↗
24. H. M. Paranjape, S. Manchiraju and P. M. Anderson: Int. J. Plast., 2016, vol. 80, pp. 1-18.10.1016/j.ijplas.2015.12.007 ↗
25. H. N. Han, C. G. Lee, D.-W. Suh and S.-J. Kim: Mater. Sci. Eng. A, 2008, vol. 485, pp. 224-233.10.1016/j.msea.2007.08.022 ↗
26. J.-F. Ganghoffer and K. Simonsson: Mech. Mater., 1998, vol. 27, pp. 125-144.10.1016/S0167-6636(97)00044-6 ↗
27. M. Cherkaoui, M. Berveiller and H. Sabar: Int. J. Plast., 1998, vol. 14, pp. 597-626.10.1016/S0749-6419(99)80000-X ↗
28. S. Cui, Y. Cui, J. Wan, Y. Rong and J. Zhang: Comput. Mater. Sci., 2016, vol. 121, pp. 131-142.10.1016/j.commatsci.2016.05.007 ↗
29. S. Cui, J. Wan, X. Zuo, N. Chen and Y. Rong: Mater. Design, 2016, vol. 109, pp. 88-97.10.1016/j.matdes.2016.07.057 ↗
30. S. Furukawa, H. Ihara, Y. Murata, Y. Tsukada and T. Koyama: Comput. Mater. Sci., 2016, vol. 119, pp. 108-113.10.1016/j.commatsci.2016.03.044 ↗
31. A. Yamanaka, T. Takaki and Y. Tomita: Mater. Sci. Eng. A, 2008, vol. 491, pp. 378-384.10.1016/j.msea.2008.02.035 ↗
32. A. Yamanaka, T. Takaki and Y. Tomita: Int. J. Mech. Sci., 2010, vol. 52, pp. 245-250.10.1016/j.ijmecsci.2009.09.020 ↗
33. H. K. Yeddu, A. Malik, J. Ågren, G. Amberg and A. Borgenstam: Acta Mater., 2012, vol. 60, pp. 1538-1547.10.1016/j.actamat.2011.11.039 ↗
34. R. Schmitt, C. Kuhn and R. Müller: Continuum Mech. Thermodyn., 2017, vol. 29, pp. 957-968.10.1007/s00161-015-0446-1 ↗
35. H. K. Yeddu, A. Borgenstam and J. Ågren: Acta Mater., 2013, vol. 61, pp. 2595-2606.10.1016/j.actamat.2013.01.039 ↗
36. H. K. Yeddu, T. Lookman and A. Saxena: Acta Mater., 2013, vol. 61, pp. 6972-6982.10.1016/j.actamat.2013.08.011 ↗
37. S. Cui, J. Wan, Y. Rong and J. Zhang: Comput. Mater. Sci., 2017, vol. 139, pp. 285-294.10.1016/j.commatsci.2017.08.010 ↗
38. S. Cui, J. Wan, J. Zhang, N. Chen and Y. Rong: Metall. Mater. Trans. A, 2018, vol. 49, pp. 5936-5941.10.1007/s11661-018-4937-0 ↗
39. E. Schoof, D. Schneider, N. Streichhan, T. Mittnacht, M. Selzer and B. Nestler: Int. J. Solids Struct., 2018, vol. 134, pp. 181-194.10.1016/j.ijsolstr.2017.10.032 ↗
40. H. K. Yeddu, B. A. Shaw and M. A. Somers: Mater. Sci. Eng. A 2017, vol. 690, pp. 1–5.10.1016/j.msea.2017.02.085 ↗
41. Z. Dai, R. Ding, Z. Yang, C. Zhang and H. Chen: Acta Mater., 2018, vol. 144, pp. 666-678.10.1016/j.actamat.2017.11.025 ↗
42. R. Schmitt, R. Müller, C. Kuhn and H. M. Urbassek: Arch. Appl. Mech., 2013, vol. 83, pp. 849-859.10.1007/s00419-012-0721-6 ↗
43. A. Malik, G. Amberg, A. Borgenstam and J. Ågren: Modell. Simul. Mater. Sci. Eng., 2013, vol. 21, p. 085003.10.1088/0965-0393/21/8/085003 ↗
44. X. Guo, S.-Q. Shi and X. Ma: Appl. Phys. Lett., 2005, vol. 87, p. 221910.
45. J.-P. Schillé, Z. Guo, N. Saunders and A. P. Miodownik: Mater. Manuf. Processes, 2011, vol. 26, pp. 137-143.10.1080/10426910903153059 ↗
46. A. Malik, H. K. Yeddu, G. Amberg, A. Borgenstam and J. Ågren: Mater. Sci. Eng. A, 2012, vol. 556, pp. 221-232.10.1016/j.msea.2012.06.080 ↗
47. F. Barbe, R. Quey, L. Taleb and E. S. de Cursi: Eur. J. Mech. A Solids, 2008, vol. 27, pp. 1121-1139.10.1016/j.euromechsol.2008.01.005 ↗
48. A. Boudiaf, L. Taleb and M. Belouchrani: Eur. J. Mech. A Solids, 2011, vol. 30, pp. 326-335.10.1016/j.euromechsol.2010.12.004 ↗
49. H. P. Liu, (Shanghai Jiao Tong University: shanghai, 2011), p 124.
50. X. Zhang, G. Shen, C. Li and J. Gu: Modell. Simul. Mater. Sci. Eng., 2019, vol. 27, p. 075011.
51. X. Zhang, G. Shen, C. Li and J. Gu: Mater. Design, 2020, vol. 188, p. 108426.10.1016/j.matdes.2019.108426 ↗
52. H. K. Yeddu, T. Lookman, A. Borgenstam, J. Ågren and A. Saxena: Mater. Sci. Eng. A, 2014, vol. 608, pp. 101–105.10.1016/j.msea.2014.04.063 ↗
53. G. Olson and M. Cohen: J. Less-Common Met., 1972, vol. 28, pp. 107-118.10.1016/0022-5088(72)90173-7 ↗
54. M. Dalgic and G. Löwisch: Materialwiss. Werkstofftech., 2006, vol. 37, pp. 122-127.10.1002/mawe.200500971 ↗
55. K. Zilnyk, D. A. Junior, H. R. Z. Sandim, P. R. Rios and D. Raabe: Acta Mater., 2018, vol. 143, pp. 227-236.10.1016/j.actamat.2017.10.026 ↗
56. A. Shibata, S. Morito, T. Furuhara and T. Maki: Scripta Mater., 2005, vol. 53, pp. 597-602.10.1016/j.scriptamat.2005.04.023 ↗