journal article·2020-01

Phase Transformation and Recovery Stress of Ni47Ti44Nb9 Alloy During Constrained Heating and Cooling

Q. C. Fan, M. Y. Sun, Y. Y. Wang, K. H. Sun, X. D. Cao, H. B. Peng, S. K. Huang, Y. H. Zhang, Y. H. Wen

Publisher page

Abstract

The phase transformation and recovery stress of pre-deformed Ni47Ti44Nb9 alloy are systematically investigated during constrained heating, cooling and thermal cycling. Recovery stress is determined by a phase transformation, thermal expansion, and contraction. Reverse martensitic transformation occurs during constrained heating and then results in a sharp increase in the recovery stress. Meanwhile, the wide phase transformation hysteresis shrinks during thermal cycling. A few martensitic transformations gradually occur across a wide temperature range during constrained cooling, resulting in a negative decreasing stage or a wide plateau of recovery stress. When cooled further to a critical value of 20 °C, the recovery stress and temperature follow the Clausius–Clapeyron equation, and large amounts of martensitic transformations appear, resulting in the sharp decrease of the recovery stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Shape Memory Alloy Transformations · High Entropy Alloys Studies · Titanium Alloys Microstructure and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. K. Otsuka and C.M. Wayman: Shape Memory Materials, 1st ed., Cambridge University Press, New York, 1998.
2. K. Otsuka and X. Ren: Prog. Mater. Sci., 2005, vol. 50, pp. 511–678.10.1016/j.pmatsci.2004.10.001 ↗
3. Y. Qiu, M.L. Young, X. Nie: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 601-608.10.1007/s11661-016-3857-0 ↗
4. C.S. Zhang, L.C. Zhao, T.W. Duerig, C.M. Wayman: Scripta Mater., 1990, vol. 24, pp. 1807–1812.10.1016/0956-716X(90)90550-Z ↗
5. M. Piao, K. Otsuka, S. Miyazaki, H. Horikawa: Mater. Trans. JIM, 1993, vol. 34, pp. 919–929.10.2320/matertrans1989.34.919 ↗
6. X.M. He, L.J. Rong, D.S. Yan, Z.M. Jiang, Y.Y. Li: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2783-2787.10.1007/s11661-004-0224-3 ↗
7. X.M. He, L.J. Rong, D.S. Yan, Y.Y. Li: Mater. Sci. Eng. A, 2004, vol. 371, pp. 193–197.10.1016/j.msea.2003.11.044 ↗
8. X.Q. Zhao, X.M. Yan, Y.Z. Yang, H.B. Xu: Mater. Sci. Eng. A, 2006, vol. 438–440, pp. 575–578.10.1016/j.msea.2006.03.110 ↗
9. F. Niccoli, C. Garion, C. Maletta, E. Sgambitterra, F. Furgiuele, P. Chiggiato: Mater. Des., 2017, vol. 114, pp. 603–611.10.1016/j.matdes.2016.11.101 ↗
10. B. Piotrowski, T.B. Zineb, E. Patoor, A. Eberhardt: Inter. J. Plasticity, 2012, vol. 36, pp. 130–147.10.1016/j.ijplas.2012.03.004 ↗
11. J.A. Simpson, K. Melton, T. Duerig: U.S. Patent, 4631094, 1986.
12. J.A. Simpson, K. Melton, T. Duerig: U.S. Patent, 4770725, 1988.
13. V.Y. Abramov, N.M. Aleksandrova, D.V. Borovkov, S.Y. Makushev: The Physics of Metals and Metallography, 2006, vol. 101, pp. 404–414.10.1134/S0031918X06040156 ↗
14. K. Uchida, N. Shigenaka, T. Sakuma, Y. Sutou, K. Yamauchi: Mater. Trans., 2008, vol. 49, pp. 1650–1655.10.2320/matertrans.MRA2007266 ↗
15. G.R. Edwards, J. Perkins, J.M. Johnson: Scripta Metall., 1975, vol. 9, pp. 1167–1171.10.1016/0036-9748(75)90400-7 ↗
16. X. Yan and V.J. Humbeeck: J. Alloys Compd., 2011, vol. 509, pp. 1001–1006.10.1016/j.jallcom.2010.09.156 ↗
17. P. Molnar and V.J. Humbeeck: International Journal of Materials Research, 2011, vol. 102, pp. 1362–1368.10.3139/146.110596 ↗
18. C.P. Wang, Y.H. Wen, H.B. Peng, D.Q. Xu, N. Li: Mater. Sci. Eng. A, 2011, vol.528, pp. 1125–1130.10.1016/j.msea.2010.10.068 ↗
19. Y.H. Wen, N. Li, L.R. Xiong: Mater. Sci. Eng. A, 2005, vol. 407, pp. 31–35.10.1016/j.msea.2005.08.054 ↗
20. H. Shi, S. Pourbabak, J.V. Humbeeck, D. Schryvers: Scripta Mater., 2012, vol. 67, pp. 939–942.10.1016/j.scriptamat.2012.08.020 ↗
21. Q.C. Fan, Y. Zhang, Y.H. Zhang, Y.Y. Wang, E.H. Yan, S.K. Huang, Y.H. Wen: J. Alloys Compd., 2019, vol. 790, pp. 1–10.10.1016/j.jallcom.2019.02.330 ↗
22. Q.C. Fan, M.Y. Sun, Y.H. Zhang, Y.Y. Wang, Y. Zhang, H.B. Peng, K.H. Sun, X.H. Fan, S.K. Huang, Y.H. Wen: Mater. Charact., 2019, vol. 154, pp. 148–160.10.1016/j.matchar.2019.05.013 ↗
23. S.J. Hao, L.S. Cui, D.Q. Jiang, X.D. Han: Science, 2013, vol. 339, pp. 1191–1194.10.1126/science.1228602 ↗
24. K.N. Melton, O. Mercier: Acta Metall., 1981, vol. 29, pp. 393–398.10.1016/0001-6160(81)90165-6 ↗
25. S. Miyazaki, K. Otsuka: Philos. Mag. A, 1984, vol. 50, pp. 393–408.10.1080/01418618408244235 ↗
26. Q.C. Fan, Y.H. Zhang, Y.Y. Wang, M.Y. Sun, Y.T. Meng, S.K. Huang, Y.H. Wen: Mater. Sci. Eng. A, 2017, vol. 700, pp. 269–280.10.1016/j.msea.2017.05.107 ↗
27. L.C. Zhao, T.W. Duerig, S. Justi, K.N. Melton, J.L. Proft, W. Yu, C.M. Wayman, Scripta Metall., 1990, vol. 24, pp. 221–226.10.1016/0956-716X(90)90245-C ↗
28. R. Stalmans, L. Delaey, V.J. Humbeeck: Journal De Physique IV, 1997, vol. 07, pp. 47–52.