Effects of Trace Al Addition on the Microstructure, Hot Deformation Behavior and Mechanical Properties of High-Strength Mg-Gd-Y-Zn Magnesium Alloy
Source abstract
Abstract
The effects of 0.2 wt pct Al addition on the microstructure, hot deformation behavior and mechanical properties of Mg-8Gd-4Y-1Zn alloy were investigated. The results showed that the Al addition obviously refined the grain structure and increased the 18R long period stacking ordered (LPSO) phase. In addition, a little Al2(Y, Gd) phase formed in the as-cast Al-doped alloy. After solid solution treatment, the Al2(Y, Gd) phase and Mg5(Gd, Y, Zn) eutectic phase were dissolved, and both 18R- and 14H-type LPSO phases could be observed at the grain boundaries of the Al-doped alloy. For the Al-free alloy, the 18R LPSO phase disappeared, and lamellar 14H-LPSO was generated in the grain interior. The calculated results showed that the Al-doped alloy had higher hot deformation activation energy and better hot workability. Under the same extrusion condition, the Al-doped alloy showed faster dynamic recrystallization but similar fully recrystallized grain size as the Al-free alloy. The average tensile strength, yield strength and elongation of the extruded alloy were concurrently improved from 329 MPa, 268 MPa and 6.0 pct to 365 MPa, 281 MPa and 11.1 pct by trace Al addition.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (44)
Show source-provided references
1. M.K. Kulekci: Int. J. Adv. Manuf. Tech, 2008, vol. 39, pp. 851-865.10.1007/s00170-007-1279-2 ↗
2. J. F. Nie: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3891-3939.10.1007/s11661-012-1217-2 ↗
3. J.D. Robson, S.J. Haigh, B. Davis and D. Griffiths: Metall. Mater. Trans. A, 2016, vol. 47, pp. 522-530.10.1007/s11661-015-3199-3 ↗
4. S.H. You, Y.D. Huang, K.U. Kainer and N. Hort: J. Mag. Alloy, 2017, vol. 5, pp. 239-253.10.1016/j.jma.2017.09.001 ↗
5. J.H. Zhang, S.J. Liu, R.Z. Wu, L. Hou and M.L. Zhang: J. Mag. Alloy, 2018, vol. 6, pp. 277-291.10.1016/j.jma.2018.08.001 ↗
6. M. Yamasaki, M. Sasaki, M. Nishijima, K. Hiraga and Y. Kawamura: Acta Mater, 2007, vol. 55, pp. 6798-6805.10.1016/j.actamat.2007.08.033 ↗
7. T. Homma, N. Kunito and S. Kamado: Scr. Mater, 2009, vol. 61, pp. 644-647.10.1016/j.scriptamat.2009.06.003 ↗
8. L. Zheng, C.M. Liu, Y.C. Wan, P.W. Yang and X. Shu: J. Alloy. Compd, 2011, vol. 509, pp. 8832-8839.10.1016/j.jallcom.2011.06.090 ↗
9. C. Xu, M. Y. Zheng, S. W. Xu, K. Wu, E. D. Wang, S. Kamado, G. J. Wang and X. Y. Lv: Mater. Sci. Eng. A 2012, vol. 547, pp. 93-98.10.1016/j.msea.2012.03.087 ↗
10. W. W. Jian, G. M. Cheng, W. Z. Xu, H. Yuan, M. H. Tsai, Q. D. Wang, C. C. Koch, Y. T. Zhu and S. N. Mathaudhu: Mater Res Lett, 2013, vol. 1, pp. 61-66.10.1080/21663831.2013.765927 ↗
11. Z.J. Yu, Y.D. Huang, X. Qiu, G.F. Wang, F.Z. Meng, N. Hort and J. Meng: Mater. Sci. Eng. A 2015, vol. 622, pp. 121-130.10.1016/j.msea.2014.10.077 ↗
12. K. Wang, J.F. Wang, S. Huang, S.Q. Gao, S.F. Guo, S.J. Liu, X.H. Chen and F.S. Pan: Mater. Sci. Eng. A 2018, vol. 733, pp. 267-275.10.1016/j.msea.2018.07.050 ↗
13. S.Y. Lyu, W.L. Xiao, R.X. Zheng, F. Wang, T. Hu and C.L. Ma: Mater. Sci. Eng. A 2018, vol. 732, pp. 178-185.10.1016/j.msea.2018.06.085 ↗
14. J.F. Wang, K. Wang, F. Hou, S.J. Liu, X. Peng, J.X. Wang and F.S. Pan: Mater. Sci. Eng. A 2018, vol. 728, pp. 10-19.10.1016/j.msea.2018.02.022 ↗
15. C. J. Bettles and M. A. Gibson: JOM, 2005, vol. 57, pp. 46-49.10.1007/s11837-005-0095-0 ↗
16. Z. R. Zeng, N. Stanford, C. H. J. Davies, J. F. Nie and N. Birbilis: Int Mater Rev 2019, vol. 64, pp. 27-62.10.1080/09506608.2017.1421439 ↗
17. B.J. Lv, J. Peng, L.L. Zhu, Y.J. Wang and A.T. Tang: Mater. Sci. Eng. A 2014, vol. 599, pp. 150-159.10.1016/j.msea.2014.01.079 ↗
18. H. Liu, J. Ju, X.W. Yang, J.L. Yan, D. Song, J.H. Jiang and A.B. Ma: J. Alloy. Compd, 2017, vol. 704, pp. 509-517.10.1016/j.jallcom.2017.02.107 ↗
19. E. Oñorbe, G. Garcés, F. Dobes, P. Pérez and P. Adeva: Metall. Mater. Trans. A 2013, vol. 44, pp. 2869-2883.10.1007/s11661-013-1628-8 ↗
20. Y. Li, W.L. Xiao, F. Wang, T. Hu and C.L. Ma: J. Alloy. Compd, 2018, vol. 745, pp. 33-43.10.1016/j.jallcom.2018.02.149 ↗
21. W.L. Xiao, S.S. Jia, J.L. Wang, J. Yang, L.D. Wang and L.M. Wang: J. Mater. Res, 2008, vol. 23, pp. 2609-2621.10.1557/JMR.2008.0343 ↗
22. D. Qiu, M.X. Zhang and P.M. Kelly: Scr. Mater, 2009, vol. 61, pp. 312-315.10.1016/j.scriptamat.2009.04.011 ↗
23. J.P. Pan: Harbin Institute of Technology, Harbin, unpublished research, 2013.
24. J. P. Li, Z. Yang, T. Liu, Y. C. Guo, F. Xia, J. M. Yang and M. X. Liang: Scr. Mater, 2007, vol. 56, pp. 137-140.10.1016/j.scriptamat.2006.09.008 ↗
25. J.C. Dai, S.M. Zhu, M.A. Easton, M.X. Zhang, D. Qiu, G.H. Wu, W.C. Liu and W.J. Ding: Mater. Sci. Eng. A 2013, vol. 576, pp. 298-305.10.1016/j.msea.2013.04.016 ↗
26. Y. X. Li, D. Qiu, Y. H. Rong and M. X. Zhang: Philos Mag, 2014, vol. 94, pp. 1311-1326.10.1080/14786435.2014.885141 ↗
27. C.L. Wang, J.C. Dai, W.C. Liu, L. Zhang and G.H. Wu: J. Alloy. Compd, 2015, vol. 620, pp. 172-179.10.1016/j.jallcom.2014.09.025 ↗
28. H. Zhang, C. Q. Liu, Y. M. Zhu, H. W. Chen, L. Bourgeois and J. F. Nie: Acta Mater, 2018, vol. 152, pp. 96-106.10.1016/j.actamat.2018.04.010 ↗
29. C. Xu, T. Nakata, X. G. Qiao, M. Y. Zheng, K. Wu and S. Kamado: Sci. Rep. 2017, vol. 7, p. 43391.10.1038/srep43391 ↗
30. W. J. Ding, Y. J. Wu, L. M. Peng, X. Q. Zeng, G. Y. Yuan and D. L. Lin: J. Mater. Res, 2009, vol. 24, pp. 1842-1854.10.1557/jmr.2009.0215 ↗
31. Y. M. Zhu, A. J. Morton and J. F. Nie: Acta Mater. 2012, vol. 60, pp. 6562-6572.10.1016/j.actamat.2012.08.022 ↗
32. T. Sakai and J. J. Jonas: Acta Metall, 1984, vol. 32, pp. 189-209.10.1016/0001-6160(84)90049-X ↗
33. H. J. McQueen: Mater. Sci. Eng. A 2004, vol. 387-389, pp. 203-208.10.1016/j.msea.2004.01.064 ↗
34. J. J. Jonas, C. M. Sellars and W. J. McG Tegart: Metall. Rev, 1969, vol. 14, pp. 1-24.10.1179/095066069790138056 ↗
35. Y.C. Zhang, L. Yang, J. Dai, J.G. Ge, G.L. Guo and Z. Liu: Mater Design, 2014, vol. 63, pp. 439-445.10.1016/j.matdes.2014.06.027 ↗
36. M. E. Kassner: Mater. Sci. Eng. A 2005, vol. 410-411, pp. 20-23.10.1016/j.msea.2005.08.053 ↗
37. Y. V. R. K. Prasad: J. Mater. Eng. Perform, 2003, vol. 12, pp. 638-645.10.1361/105994903322692420 ↗
38. Y. V. R. K. Prasad and T. Seshacharyulu: Int. Mater. Rev, 1998, vol. 43, pp. 243-258.10.1179/imr.1998.43.6.243 ↗
39. B.J. Lv, J. Peng, D.W. Shi, A.T. Tang and F.S. Pan: Mater. Sci. Eng. A 2013, vol. 560, pp. 727-733.
40. K. Wen, K. Liu, Z.H. Wang, S.B. Li and W.B. Du: J. Mag. Alloy, 2015, vol. 3, pp. 23-28.10.1016/j.jma.2014.12.003 ↗
41. J. D. Robson, D. T. Henry and B. Davis: Acta Mater, 2009, vol. 57, pp. 2739-2747.10.1016/j.actamat.2009.02.032 ↗
42. X. Wu, F.S. Pan, R.J. Cheng and S.Q. Luo: Mater. Sci. Eng. A 2018, vol. 726, pp. 64-68.10.1016/j.msea.2018.04.079 ↗
43. E. Oñorbe, G. Garcés, P. Pérez and P. Adeva: J. Mater. Sci, 2012, vol. 47, pp. 1085-1093.10.1007/s10853-011-5899-4 ↗
44. X. H. Shao, Z. Q. Yang and X. L. Ma: Acta Mater, 2010, vol. 58, pp. 4760-4771.10.1016/j.actamat.2010.05.012 ↗